The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
11,000 h of chemical-looping combustion operation—Where are we and where do we want to go?
Open accessAbstract
Abstract A key for chemical-looping combustion (CLC) is the oxygen carrier. The ultimate test is obviously the actual operation, which reveals if it turns to dust, agglomerates or loses its reactivity or oxygen carrier capacity. The CLC process has been operated in 46 smaller chemical-looping combustors, for a total of more than 11,000 h. The operation involves both manufactured oxygen carriers, with 70% of the total time of operation, and less costly materials, i.e. natural ores or waste materials. Among manufactured materials, the most popular materials are based on NiO with 29% of the operational time, Fe2O3 with 16% and CuO with 13%. Among the monometallic oxides there are also Mn3O4 with 1%, and CoO with 2%. The manufactured materials also include a number of combined oxides with 11% of operation, mostly calcium manganites and other combined manganese oxides. Finally, the natural ores and waste materials include ilmenite, FeTiO3 with 13%, iron ore/waste with 9% and manganese ore with 6%. In the last years a shift towards more focus on CuO, combined oxides and natural ores has been seen. The operational experience shows a large variation in performance depending on pilot design, operational conditions, solids inventory, oxygen carrier and fuel. However, there is at present no experience of the process at commercial or semi-commercial scale, although oxygen-carrier materials have been successfully used in commercial fluidized-bed boilers for Oxygen-Carrier Aided Combustion (OCAC) during more than 12,000 h of operation. The paper discusses strategies for upscaling as well as the use of biomass for negative emissions. A key question is how scaling-up will affect the performance, which again will determine the costs for purification of CO2 through e.g. oxy-polishing. Unfortunately, the conditions in the small-scale pilots do not allow for any safe conclusions with respect to performance in full scale. Nevertheless, the experiences from pilot operation shows that the process works and can be expected to work in the large scale and gives important information, for instance on the usefulness of various oxygen-carriers. Because further research is not likely to improve our understanding of the performance that can be achieved in full scale, there is little sense in waiting with the scale-up. A major difficulty with the scaling-up of a novel process is in the risk. First-of-its-kind large-scale projects include risks of technical mistakes and unforeseen obstacles, leading to added costs or, in the worst case, failure. One way of addressing these risks is to focus on the heart of the process and build it with maximum flexibility for future use. A concept for maximum flexibility is the Multipurpose Dual Fluidized Bed (MDFB). Another is to find a suitable existing plant, e.g. a dual fluidized-bed thermal gasifier. With present emissions the global CO2 budget associated with a maximum temperature of 2 °C may be spent in around 20–25 years, whereas the CO2 budget for 1.5 °C is may be exhausted in 10 years. Thus, the need for both CO2 neutral fuels and negative emissions will become increasingly urgent as we are nearing or transgressing the maximum amount of CO2 that can be emitted without compromising the global climate agreement in Paris saying we must keep “well below” 2 °C and aim for a maximum of 1.5 °C. Thus, biomass may turn out to be a key fuel for Carbon Capture and Storage (CCS), because CO2-free power does not necessarily need CCS, but negative emissions will definitely need Bio-CCS.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
Self-citationThe trouble with negative emissions
Anderson, K., & Peters, G. (2016) · Science · doi:10.1126/science.aah4567 · Cited by 1,252
Cited by
Chemical looping beyond combustion – a perspective
Zhu, X., Imtiaz, Q., Donat, F., Müller, C. R., & Li, F. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03793d · Cited by 538
Chemical Looping Combustion: Status and Development Challenges
Lyngfelt, A. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c01454 · Cited by 264
Self-citation
Metadata
- Authors
- Lyngfelt, A., Brink, A., Langørgen, Ø., Mattisson, T., Rydén, M., & Linderholm, C.
- Venue
- International Journal of Greenhouse Gas Control
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 88
- Pages
- 38-56
- ISSN
- 1750-5836 (ISSN-L)
- OpenAlex
- W2948072684
- Cited by
- 218
- References
- 2
- FWCI
- 9.62
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 11,000 h of chemical-looping combustion operation—Where are we and where do we want to go? https://app.cochat.ai/papers/10.1016/j.ijggc.2019.05.023
- The paper
- Lyngfelt, A., Brink, A., Langørgen, Ø., Mattisson, T., Rydén, M., & Linderholm, C. (2019). 11,000 h of chemical-looping combustion operation—Where are we and where do we want to go? International Journal of Greenhouse Gas Control. https://doi.org/10.1016/j.ijggc.2019.05.023
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.