Numerical investigation of thermal and optical performance of window units filled with nanoparticle enhanced PCM
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Abstract Filling window units with phase change material (PCM) improves the thermal performance of windows, but on the other hand it has a deteriorative effect on the optical performance due to poor heat conductivity of PCM. A novel method to tackle this drawback of PCM is to disperse nanoparticles in the PCM. In this study, a model was developed to evaluate the thermal and optical performances of window units filled with nanoparticle enhanced PCM (NePCM). The effect of different types of nanoparticles, volume fractions of nanoparticles and sizes of nanoparticles on the thermal and optical performances of windows such as temperature, heat flux, solar transmittance, absorptance and reflectance were numerically investigated and compared with the referent case (i.e. pure PCM). The results showed that the optical and thermal performances of window units filled with nanoparticle dispersed paraffin wax are improved compared to that of with pure paraffin. However, the improvement is nearly the same regardless of nanoparticle type. The effect of volume fraction and size of nanoparticle is significant during the sunset and sunrise periods. Considering both thermal and optical performances of window units, it is recommended to disperse CuO nanoparticles with the volume fraction of below 1% and nanoparticle size of below 15 nm in PCM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of thermal energy storage technologies based on PCM application in buildings
Pomianowski, M., Heiselberg, P., & Zhang, Y. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.08.006 · Cited by 474 · cited 1×
“Filling the cavity between glass panes with PCM is a promising approach to increase the thermal performance of windows, because the PCM in the window unit can absorb some part of solar energy for thermal energy storage [27,28], and still allow visible light transmittance to the indoor environment for day lighting [29,…”
BackgroundRecent progress in solar thermal energy storage using nanomaterials
Ahmed, S. F., Khalid, M., Rashmi, W., Chan, A., & Shahbaz, K. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.034 · Cited by 148
Elbahjaoui, R., & El Qarnia, H. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.10.115 · Cited by 100
Cited by
Nano-enhanced phase change materials: Fundamentals and applications
Said, Z., Pandey, A. K., Tiwari, A. K., Kalidasan, B., Jamil, F., Thakur, A. K., Tyagi, V. V., Sarı, A., & Ali, H. M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2024.101162 · Cited by 386
Arıcı, M., Bilgin, F., Nižetić, S., & Karabay, H. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114560 · Cited by 324
Self-citationHassan, F., Jamil, F., Hussain, A., Ali, H. M., Janjua, M. M., Khushnood, S., Farhan, M., Altaf, K., Said, Z., & Li, C. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101646 · Cited by 283
Optical and thermal performance of glazing units containing PCM in buildings: a review
Li, D., Wu, Y., Wang, B., Liu, C., & Arıcı, M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117327 · Cited by 216
Self-citation
Metadata
- Authors
- Li, D., Wu, Y., Liu, C., Zhang, G., & Arıcı, M.
- Venue
- International Journal of Heat and Mass Transfer
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 125
- Pages
- 1321-1332
- ISSN
- 0017-9310 (ISSN-L)
- OpenAlex
- W2803262170
- Cited by
- 96
- References
- 3
- FWCI
- 7.51
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Numerical investigation of thermal and optical performance of window units filled with nanoparticle enhanced PCM. https://app.cochat.ai/papers/10.1016/j.ijheatmasstransfer.2018.04.152
- The paper
- Li, D., Wu, Y., Liu, C., Zhang, G., & Arıcı, M. (2018). Numerical investigation of thermal and optical performance of window units filled with nanoparticle enhanced PCM. International Journal of Heat and Mass Transfer. https://doi.org/10.1016/j.ijheatmasstransfer.2018.04.152
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.