The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Drop weight impact behaviour of sandwich panels with metallic micro lattice cores
Open accessAbstract
The paper addresses the low velocity, drop weight behaviour of small (100 mm by 100 mm) sandwich panels with CFRP skins. The main point of interest is the core material, and the focus of the paper is in the use of body centred cubic (BCC) micro lattice cores made from Ti 6Al 4V titanium alloy and 316L stainless steel manufactured using selective laser melting. The mechanical behaviour of the micro lattice core is compared to that of conventional aluminium honeycomb. The paper discusses the manufacture and characterisation of the core materials, the measurement of core properties from strut tensile tests, block compression tests and the drop weight impact performance of the panels. Impact performance is expressed in terms of panel penetration. It is shown that the current Ti 6Al 4V BCC micro lattice cores are competitive with aluminium honeycomb, but that there is scope for improvement in Ti 6Al 4V micro strut mechanical properties. The SLM manufacturing process gives lattice structures with open cell architecture, which is an advantage for aerospace applications, and the SLM process can be used to realise a variety of cell lattice geometries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Ultralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784
Foam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
Micro-architectured materials: past, present and future
Fleck, N. A., Deshpande, V. S., & Ashby, M. F. (2010) · Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2010.0215 · Cited by 982
Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
Parthasarathy, J., Starly, B., Raman, S., & Christensen, A. (2010) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2009.10.006 · Cited by 816
Collapse of truss core sandwich beams in 3-point bending
Deshpande, V. S., & Fleck, N. A. (2001) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(01)00103-2 · Cited by 532
Song, B., Dong, S., Zhang, B., Liao, H., & Coddet, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.09.051 · Cited by 429
Mullen, L., Stamp, R. C., Brooks, W. K., Jones, E., & Sutcliffe, C. J. (2009) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31219 · Cited by 410
Selective Laser Melting: A manufacturing technology for the future?
Bremen, S., Meiners, W., & Diatlov, A. (2012) · Laser Technik Journal · doi:10.1002/latj.201290018 · Cited by 402
Properties of Ti–6Al–4V non-stochastic lattice structures fabricated via electron beam melting
Cansizoglu, O., Harrysson, O. L. A., Cormier, D., West, H., & Mahale, T. (2008) · Materials Science and Engineering A · doi:10.1016/j.msea.2008.04.002 · Cited by 267
Tsopanos, S., Mines, R. A. W., McKown, S., Shen, Y., Cantwell, W. J., Brooks, W., & Sutcliffe, C. J. (2010) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4001743 · Cited by 252
Self-citationConcepts for enhanced energy absorption using hollow micro-lattices
Evans, A. G., He, M. Y., Deshpande, V. S., Hutchinson, J. W., Jacobsen, A. J., & Carter, W. B. (2010) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2010.03.007 · Cited by 236
An investigation into the compressive properties of stainless steel micro-lattice structures
Ushijima, K., Cantwell, W., Mines, R., Tsopanos, S., & Smith, M. (2011) · Journal of Sandwich Structures & Materials · doi:10.1177/1099636210380997 · Cited by 232
Self-citationSandwich structures with textile-reinforced composite foldcores under impact loads
Heimbs, S., Cichosz, J., Klaus, M., Kilchert, S., & Johnson, A. F. (2010) · Composite Structures · doi:10.1016/j.compstruct.2009.11.001 · Cited by 211
Dynamic failure of metallic pyramidal truss core materials – Experiments and modeling
Lee, S., Barthelat, F., Hutchinson, J. W., & Espinosa, H. D. (2006) · International Journal of Plasticity · doi:10.1016/j.ijplas.2006.02.006 · Cited by 179
Titanium alloy lattice truss structures
Queheillalt, D. T., & Wadley, H. N. G. (2009) · Materials & Design · doi:10.1016/j.matdes.2008.09.015 · Cited by 168
The Mechanical Properties of Sandwich Structures Based on Metal Lattice Architectures
Shen, Y., McKown, S., Tsopanos, S., Sutcliffe, C. J., Mines, R. A. W., & Cantwell, W. J. (2009) · Journal of Sandwich Structures & Materials · doi:10.1177/1099636209104536 · Cited by 151
Self-citationCasavola, C., Campanelli, S. L., & Pappalettere, C. (2008) · The Journal of Strain Analysis for Engineering Design · doi:10.1243/03093247jsa464 · Cited by 134
The quasi-static and blast response of steel lattice structures
Smith, M. L., Cantwell, W. J., Guan, Z., Tsopanos, S., Theobald, M. D., Nurick, G. N., & Langdon, G. S. (2010) · Journal of Sandwich Structures & Materials · doi:10.1177/1099636210388983 · Cited by 119
Self-citationSantos, E. C., Osakada, K., Shiomi, M., Kitamura, Y., & Abe, F. (2004) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1243/0954406041319545 · Cited by 116
Compression behavior of micro-scale truss structures formed from self-propagating polymer waveguides
Jacobsen, A. J., Barvosa-Carter, W., & Nutt, S. (2007) · Acta Materialia · doi:10.1016/j.actamat.2007.08.036 · Cited by 99
Cellular Truss Core Sandwich Structures
Sypeck, D. J. (2005) · Applied Composite Materials · doi:10.1007/s10443-005-1129-z · Cited by 84
Energy and Resource Efficiency of SLS/SLM Processes
Kellens, K., Yasa, E., Renaldi, R., Dewulf, W., Kruth, J., & Duflou, J. R. (2011) · doi:10.26153/tsw/15272 · Cited by 57
Ptochos, E., & Labeas, G. N. (2012) · Strain · doi:10.1111/j.1475-1305.2012.00837.x · Cited by 50
Cited by
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Aboulkhair, N. T., Simonelli, M., Parry, L., Ashcroft, I., Tuck, C., & Hague, R. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100578 · Cited by 1,552
Tancogne-Dejean, T., Spierings, A. B., & Mohr, D. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.054 · Cited by 806
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., Ashcroft, I. A., Wildman, R. D., & Hague, R. J. M. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.06.013 · Cited by 706
Metadata
- Authors
- Mines, R. A. W., Tsopanos, S., Shen, Y., Hasan, R., & McKown, S. T.
- Venue
- International Journal of Impact Engineering
- Publisher
- Elsevier BV
- Published
- 2013-10
- Volume
- 60
- Pages
- 120-132
- ISSN
- 0734-743X (ISSN-L)
- OpenAlex
- W2168690273
- Cited by
- 253
- References
- 24
- FWCI
- 9.74
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.