The DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.
Simultaneous enhancement of strength and ductility in a NiCoCrFe high-entropy alloy upon dynamic tension: Micromechanism and constitutive modeling
Abstract
The deformation responses of NiCoCrFe high-entropy alloy (HEA) under quasi-static (1 × 10−4-1 × 10−1/s) and dynamic (1,000–6,000/s) tension were investigated. A good combination of high strength and ductility is obtained under dynamic tension. The yield strength and true ultimate tensile strength is increased from 217 to 830 MPa at 1 × 10−4/s to 440 MPa and more than 1,000 MPa at 6,000/s, respectively. In addition, the engineering fracture strains maintain 60%–85% over a wide range of strain rates. The enhancements of strength and ductility originate from (1) the significant strain-rate sensitivity (SRS) mainly due to the presence of short-range orders/clusters (SROs/SRCs) as well as phonon drag effect of dislocations, and (2) the extraordinary work-hardening capacity due to dynamically formed nanoscale twins upon high strain-rate tension. The temperature and strain-rate dependence of the yield strength of the alloy are well modeled based on the thermally activated mechanism. Additionally, considering nanoscale twin boundaries as local sites for nucleating and accommodating dislocations, the dislocation density evolution model is modified and subsequently introduced into Taylor hardening model to accurately capture the hardening behavior of the current NiCoCrFe HEA. Hence, the distinguished work-hardening capacity under dynamic tension can be mainly ascribed to the low dislocation recovery rate and remarkable twin-induced dislocation generation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Self-citationA fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Johnson, G. R. (1983) · Medical Entomology and Zoology · Cited by 3,935
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Physics and phenomenology of strain hardening: the FCC case
Kocks, U. F., & Mecking, H. (2003) · Progress in Materials Science · doi:10.1016/s0079-6425(02)00003-8 · Cited by 3,286
Meyers, M. A. (1994) · Wiley eBooks · doi:10.1002/9780470172278 · Cited by 3,282
Wu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
Revealing the Maximum Strength in Nanotwinned Copper
Lu, L., Chen, X., Huang, X., & Lu, K. (2009) · Science · doi:10.1126/science.1167641 · Cited by 2,110
Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
Gludovatz, B., Hohenwarter, A., Thurston, K. V. S., Bei, H., Wu, Z., George, E. P., & Ritchie, R. O. (2016) · Nature Communications · doi:10.1038/ncomms10602 · Cited by 1,930
High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — application
Grässel, O., Krüger, L., Frommeyer, G., & Meyer, L. W. (2000) · International Journal of Plasticity · doi:10.1016/s0749-6419(00)00015-2 · Cited by 1,819
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Lei, Z., Liu, X., Wu, Y., Wang, H., Jiang, S., Wang, S., Hui, X., Wu, Y., Gault, B., Kontis, P., et al. (2018) · Nature · doi:10.1038/s41586-018-0685-y · Cited by 1,764
Self-citationMulticomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
Yang, T., Zhao, Y. L., Tong, Y., Jiao, Z. B., Wei, J., Cai, J. X., Han, X. D., Chen, D., Hu, A., Kai, J. J., et al. (2018) · Science · doi:10.1126/science.aas8815 · Cited by 1,684
Twinning-induced plasticity (TWIP) steels
De Cooman, B. C., Estrin, Y., & Kim, S. K. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.06.046 · Cited by 1,614
Laplanche, G., Kostka, A., Reinhart, C., Hunfeld, J., Eggeler, G., & George, E. P. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.036 · Cited by 1,379
Schuh, B., Mendez-Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R., & Hohenwarter, A. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.025 · Cited by 1,323
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy
Laplanche, G., Kostka, A., Horst, O. M., Eggeler, G., & George, E. P. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.038 · Cited by 1,198
Science and technology in high-entropy alloys
Zhang, W., Liaw, P. K., & Zhang, Y. (2018) · Science China Materials · doi:10.1007/s40843-017-9195-8 · Cited by 1,131
Self-citationLu, Y., Gao, X., Jiang, L., Chen, Z., Wang, T., Jie, J., Kang, H., Zhang, Y., Guo, S., Ruan, H., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.11.016 · Cited by 1,125
Self-citationSolid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties
Zhou, Y. J., Zhang, Y., Wang, Y. L., & Chen, G. L. (2007) · Applied Physics Letters · doi:10.1063/1.2734517 · Cited by 1,079
Self-citationZhao, Y. L., Yang, T., Tong, Y., Wang, J., Luan, J. H., Jiao, Z. B., Chen, D., Yang, Y., Hu, A., Liu, C. T., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.07.029 · Cited by 998
Shi, P., Ren, W., Zheng, T., Ren, Z., Hou, X., Peng, J., Hu, P., Gao, Y., Zhong, Y., & Liaw, P. K. (2019) · Nature Communications · doi:10.1038/s41467-019-08460-2 · Cited by 954
Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Meisenkothen, F., Miracle, D. B., & Woodward, C. F. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6260-2 · Cited by 916
Wu, Z., Bei, H., Otto, F., Pharr, G. M., & George, E. P. (2014) · Intermetallics · doi:10.1016/j.intermet.2013.10.024 · Cited by 909
Shi, Y., Yang, B., Xie, X., Brechtl, J., Dahmen, K. A., & Liaw, P. K. (2017) · Corrosion Science · doi:10.1016/j.corsci.2017.02.019 · Cited by 887
Mechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy
Zaddach, A. J., Niu, C., Koch, C. C., & Irving, D. L. (2013) · JOM · doi:10.1007/s11837-013-0771-4 · Cited by 878
Curtze, S., & Kuokkala, V.-T. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.05.049 · Cited by 866
Design of a twinning-induced plasticity high entropy alloy
Deng, Y., Tasan, C. C., Pradeep, K. G., Springer, H., Kostka, A., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.04.014 · Cited by 861
On the origin of planar slip in f.c.c. alloys
Gerold, V., & Karnthaler, H. P. (1989) · Acta Metallurgica · doi:10.1016/0001-6160(89)90143-0 · Cited by 853
Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
Zhang, Z., Mao, M. M., Wang, J., Gludovatz, B., Zhang, Z., Mao, S. X., George, E. P., Yu, Q., & Ritchie, R. O. (2015) · Nature Communications · doi:10.1038/ncomms10143 · Cited by 845
Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys
Hemphill, M. A., Yuan, T., Wang, G. Y., Yeh, J. W., Tsai, C. W., Chuang, A., & Liaw, P. K. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.06.046 · Cited by 811
Li, Z., Tasan, C. C., Pradeep, K. G., & Raabe, D. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.03.069 · Cited by 757
Santodonato, L. J., Zhang, Y., Feygenson, M., Parish, C. M., Gao, M. C., Weber, R. J. K., Neuefeind, J. C., Tang, Z., & Liaw, P. K. (2015) · Nature Communications · doi:10.1038/ncomms6964 · Cited by 708
Self-citationPhase‐Transformation Ductilization of Brittle High‐Entropy Alloys via Metastability Engineering
Huang, H., Wu, Y., He, J., Wang, H., Liu, X., An, K., Wu, W., & Lu, Z. (2017) · Advanced Materials · doi:10.1002/adma.201701678 · Cited by 705
Self-citationZhang, Z., Sheng, H., Wang, Z., Gludovatz, B., Zhang, Z., George, E. P., Yu, Q., Mao, S. X., & Ritchie, R. O. (2017) · Nature Communications · doi:10.1038/ncomms14390 · Cited by 664
Self-citationKumar, N. A. P. K., Li, C., Leonard, K. J., Bei, H., & Zinkle, S. J. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.007 · Cited by 627
Lattice distortion in a strong and ductile refractory high-entropy alloy
Lee, C., Song, G., Gao, M. C., Feng, R., Chen, P., Brechtl, J., Chen, Y., An, K., Guo, W., Poplawsky, J. D., et al. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.053 · Cited by 622
Precipitation in the equiatomic high-entropy alloy CrMnFeCoNi
Pickering, E. J., Muñoz-Moreno, R., Stone, H. J., & Jones, N. G. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.10.025 · Cited by 555
Yang, M., Yan, D., Yuan, F., Jiang, P., Ma, E., & Wu, X. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1807817115 · Cited by 548
The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy
Miao, J., Slone, C. E., Smith, T. M., Niu, C., Bei, H., Ghazisaeidi, M., Pharr, G. M., & Mills, M. J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.04.033 · Cited by 539
Gutiérrez‐Urrutia, I., & Raabe, D. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.07.018 · Cited by 538
Unified Constitutive Laws of Plastic Deformation
(1996) · Elsevier eBooks · doi:10.1016/b978-0-12-425970-6.x5000-0 · Cited by 500
Li, Z., Körmann, F., Grabowski, B., Neugebauer, J., & Raabe, D. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.07.023 · Cited by 397
An, X. H., Wu, S. D., Wang, Z. G., & Zhang, Z. F. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.11.001 · Cited by 374
Self-citationDislocation-Density–Related Constitutive Modeling
Estrin, Y. (1996) · Elsevier eBooks · doi:10.1016/b978-012425970-6/50003-5 · Cited by 348
Li, D., & Zhang, Y. (2016) · Intermetallics · doi:10.1016/j.intermet.2015.11.002 · Cited by 346
Self-citationHigh strain-rate compressive deformation behavior of the Al0.1CrFeCoNi high entropy alloy
Kumar, N., Ying, Q., Nie, X., Mishra, R. S., Tang, Z., Liaw, P. K., Brennan, R. E., Doherty, K. J., & Cho, K. C. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.161 · Cited by 339
On the strength of solid solution alloys
Fisher, J. C. (1954) · Acta Metallurgica · doi:10.1016/0001-6160(54)90087-5 · Cited by 337
Ming, K., Bi, X., & Wang, J. (2018) · International Journal of Plasticity · doi:10.1016/j.ijplas.2017.10.005 · Cited by 330
Park, J. M., Moon, J., Bae, J. W., Jang, M. J., Park, J., Lee, S., & Kim, H. S. (2018) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.02.031 · Cited by 290
Flow stress of f.c.c. polycrystals with application to OFHC Cu
Nemat‐Nasser, S., & Li, Y. (1998) · Acta Materialia · doi:10.1016/s1359-6454(97)00230-9 · Cited by 264
Atomic-scale properties of Ni-based FCC ternary, and quaternary alloys
Tamm, A., Aabloo, A., Klintenberg, M., Stocks, M., & Caro, A. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.08.015 · Cited by 240
Spin-driven ordering of Cr in the equiatomic high entropy alloy NiFeCrCo
Niu, C., Zaddach, A. J., Oni, A. A., Sang, X., Hurt, J. W., LeBeau, J. M., Koch, C. C., & Irving, D. L. (2015) · Applied Physics Letters · doi:10.1063/1.4918996 · Cited by 225
Strength and ductility of CrFeCoNiMo alloy with hierarchical microstructures
Ming, K., Bi, X., & Wang, J. (2019) · International Journal of Plasticity · doi:10.1016/j.ijplas.2018.10.005 · Cited by 200
Dirras, G., Couque, H., Lilensten, L., Heczel, A., Tingaud, D., Couzinié, J.-P., Perrière, L., Gubicza, J., & Guillot, I. (2016) · Materials Characterization · doi:10.1016/j.matchar.2015.11.018 · Cited by 171
Stress equivalence of solution hardening
Basinski, Z. S., Foxall, R. A., & Pascual, R. (1972) · Scripta Metallurgica · doi:10.1016/0036-9748(72)90052-x · Cited by 166
Feng, X. B., Zhang, J. Y., Wang, Y. Q., Hou, Z. Q., Wu, K., Liu, G., & Sun, J. (2017) · International Journal of Plasticity · doi:10.1016/j.ijplas.2017.04.013 · Cited by 166
Khan, A. S., & Baig, M. (2010) · International Journal of Plasticity · doi:10.1016/j.ijplas.2010.08.001 · Cited by 127
Towards a greater understanding of serrated flows in an Al-containing high-entropy-based alloy
Brechtl, J. M., Chen, S. Y., Xie, X., Ren, Y., Qiao, J., Liaw, P. K., & Zinkle, S. J. (2018) · International Journal of Plasticity · doi:10.1016/j.ijplas.2018.11.011 · Cited by 122
Self-citationAtomistic clustering-ordering and high-strain deformation of an Al0.1CrCoFeNi high-entropy alloy
Sharma, A., Singh, P. K., Johnson, D. D., Liaw, P. K., & Balasubramanian, G. (2016) · Scientific Reports · doi:10.1038/srep31028 · Cited by 116
Kim, H., Ha, Y., Kwon, K. H., Kang, M., Kim, N. J., & Lee, S. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.027 · Cited by 99
Liu, T., Wu, Z., Stoica, A. D., Xie, Q., Wu, W., Gao, Y., Bei, H., & An, K. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.039 · Cited by 72
Experimental determination of latent hardening coefficients in FeMnNiCoCr
Wu, Y., Bönisch, M., Alkan, S., Abuzaid, W. Z., & Şehitoğlu, H. (2018) · International Journal of Plasticity · doi:10.1016/j.ijplas.2018.02.016 · Cited by 55
Self-citationEntropy modeling on serrated flows in carburized steels
Brechtl, J. M., Chen, B., Xie, X., Ren, Y., Venable, J. D., Liaw, P. K., & Zinkle, S. J. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.02.096 · Cited by 26
Cited by
A review on the dynamic-mechanical behaviors of high-entropy alloys
Tang, Y., Wang, R., Xiao, B., Zhang, Z., Li, S., Qiao, J., Bai, S., Zhang, Y., & Liaw, P. K. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101090 · Cited by 314
Self-citation
Metadata
- Authors
- Zhang, T. W., Ma, S. G., Zhao, D., Wu, Y. C., Zhang, Y., Wang, Z. H., & Qiao, J. W.
- Venue
- International Journal of Plasticity
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 124
- Pages
- 226-246
- ISSN
- 0749-6419 (ISSN-L)
- OpenAlex
- W2971042528
- Cited by
- 293
- References
- 67
- FWCI
- 14.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.