Multi-heterostructure and mechanical properties of N-doped FeMnCoCr high entropy alloy
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Abstract High-entropy alloys (HEAs) have been extensively studied in recent years. However, yield strength of HEAs in which austenite is the dominating phase is usually low, far from satisfying the engineering demands. Improving performance-cost ratio of such alloys will help for their practical structural applications. Here we report a novel strategy to produce ultrastrong, tough, and low-cost HEAs, in which heavy nitrogen-doping (2.6 at.%) was applied to an inexpensive metastable FeMnCoCr HEA. Coupled with simple thermomechanical processing, we produced a multi-heterostructure, which consisted of fine α-martensite laths, deformed austenite with dense dislocations, recrystallized ultrafine grains and nano-nitride precipitates. Our novel FeMnCoCrN HEA exhibits a high yield strength of 1310 MPa which is ~5.2 times stronger than its base alloy without nitrogen doping. In particular, the highly dislocated body-centered cubic (bcc) martensite laths formed in the austenitic deformation matrix has an unexpected area fraction up to 24%. The hetero-deformation induced strengthening then reaches 750 MPa at the yield point, leading to a remarkable yield strength elevation of the material. Moreover, the high nitrogen content changes the dominant deformation mechanism from martensitic transformation to twinning, which contributes to a satisfactory uniform elongation of 16.5%, while the material is further strengthened by the dynamically refined microstructure. The high-nitrogen duplex alloy design strategy developed here provides a new paradigm for developing high-performance fcc HEAs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Lei, Z., Liu, X., Wu, Y., Wang, H., Jiang, S., Wang, S., Hui, X., Wu, Y., Gault, B., Kontis, P., et al. (2018) · Nature · doi:10.1038/s41586-018-0685-y · Cited by 1,764
Tuning element distribution, structure and properties by composition in high-entropy alloys
Ding, Q., Zhang, Y., Chen, X., Fu, X., Chen, D., Chen, S., Gu, L., Wei, F., Bei, H., Gao, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1617-1 · Cited by 1,614
Cited by
Yang, C., Ren, C., Jia, Y., Wang, G., Li, M., & Lu, W. (2022) · Acta Materialia · doi:10.1016/j.actamat.2021.117431 · Cited by 335
Metadata
- Authors
- He, Z., Jia, N., Yan, H., Shen, Y., Zhu, M., Guan, X., Zhao, X., Jin, S., Sha, G., Zhu, Y., & Liu, C. T.
- Venue
- International Journal of Plasticity
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 139
- Pages
- 102965
- ISSN
- 0749-6419 (ISSN-L)
- OpenAlex
- W3131395753
- Cited by
- 221
- References
- 3
- FWCI
- 13.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.