The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
The N-doped activated carbon derived from sugarcane bagasse for CO2 adsorption
Abstract
In this study, a highly selective CO2 adsorbent from sugarcane bagasse (waste biomass) was prepared, and the enrichment of nitrogen in the adsorbent was achieved via urea-KOH method. Moreover, the influence of preparing parameters such as urea addition, KOH/carbon ratio and activation temperature on the pore textural properties and CO2 uptake capacity of adsorbents were investigated. Brunauer–Emmet–Teller (BET), X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), Fourier Transform Infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) were used to characterize the adsorbents. The results indicated that whereas the temperature and pressure of 25 °C and 1 bar, the adsorbent had the highest CO2 uptake of 4.8 mmol/g. The preparation condition of the adsorbent was at 600 °C with 15 wt% urea additions and KOH/carbon ratio of 2.0. It was also found that there were pyridinic-N (N-6), pyrrolic-/pyridonic-N (N-5), quaternary-N (N–Q) and pyridine-N-oxide (N–X) functional groups at the surface. At the same time, the SB-AC had uniform micropores (∼0.55 nm). Hence, the adsorbent had an excellent CO2/N2 selectivity. The CO2 uptake of the adsorbent was almost identical during the five runs of CO2 adsorption/desorption measurements, indicating good stability and regenerability CO2 adsorption. The narrow micro-pore volume (pore width ≤ 1 nm) fraction and N content in SB-ACs were 80–89% and 0.6–3.34 wt%, respectively. The results led to the conclusion that the narrow micropores and N content in the adsorbent were considered as the important roles for CO2 adsorption.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tan, X.-F., Liu, S.-B., Liu, Y.-G., Gu, Y.-L., Zeng, G.-M., Hu, X.-J., Wang, X., Liu, S.-H., & Jiang, L.-H. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2016.12.083 · Cited by 711
To, J. W. F., He, J., Mei, J., Haghpanah, R., Chen, Z., Kurosawa, T., Chen, S., Bae, W.-G., Pan, L., Tok, J. B.-H., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11955 · Cited by 475
Carbon dioxide capture using biochar produced from sugarcane bagasse and hickory wood
Creamer, A. E., Gao, B., & Zhang, M. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.03.105 · Cited by 432
Enhanced CO2 Capture Capacity of Nitrogen-Doped Biomass-Derived Porous Carbons
Chen, J., Yang, J., Hu, G., Hu, X., Li, Z., Shen, S., Radosz, M., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01425 · Cited by 419
Serafin, J., Narkiewicz, U., Morawski, A. W., Wróbel, R. J., & Michalkiewicz, B. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.01.006 · Cited by 393
CO2 adsorption at nitrogen-doped carbons prepared by K2CO3 activation of urea-modified coconut shell
Yue, L., Xia, Q., Wang, L., Wang, L., DaCosta, H., Yang, J., & Hu, X. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.09.040 · Cited by 364
Nie, C., Yang, X., Niazi, N. K., Xu, X., Wen, Y., Rinklebe, J., Ok, Y. S., Xu, S., & Wang, H. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2018.02.134 · Cited by 340
Coromina, H. M., Walsh, D. A., & Mokaya, R. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09202g · Cited by 321
Comprehensive study of ultra-microporous nitrogen-doped activated carbon for CO2 capture
Sethia, G., & Sayari, A. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.017 · Cited by 319
Varma, A. K., & Mondal, P. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.11.039 · Cited by 309
High surface area mesoporous activated carbon-alginate beads for efficient removal of methylene blue
Nasrullah, A., Bhat, A. H., Naeem, A., Isa, M. H., & Danish, M. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.10.045 · Cited by 287
Han, J., Liang, Y., Hu, J., Qin, L., Street, J., Lu, Y., & Yu, F. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.10.030 · Cited by 269
Self-citationManyà, J. J., González, B., Azuara, M., & Arner, G. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.01.092 · Cited by 240
Measurement and analysis of adsorption isotherms of CO2 on activated carbon
Singh, V. K., & Anil Kumar, E. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.10.052 · Cited by 233
An efficient CO2 adsorptive storage using MOF-5 and MOF-177
Qasem, N. A. A., Ben-Mansour, R., & Habib, M. A. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.11.011 · Cited by 232
Boyjoo, Y., Cheng, Y., Zhong, H., Tian, H., Pan, J., Pareek, V. K., Jiang, S. P., Lamonier, J.-F., Jaroniec, M., & Liu, J. (2017) · Carbon · doi:10.1016/j.carbon.2017.02.030 · Cited by 216
Danish, M., Ahmad, T., Hashim, R., Said, N., Akhtar, M. N., Mohamad-Saleh, J., & Sulaiman, O. (2018) · Surfaces and Interfaces · doi:10.1016/j.surfin.2018.02.001 · Cited by 206
Wang, L., Rao, L., Xia, B., Wang, L., Yue, L., Liang, Y., DaCosta, H., & Hu, X. (2018) · Carbon · doi:10.1016/j.carbon.2018.01.003 · Cited by 172
Pine cone shell-based activated carbon used for CO 2 adsorption
Li, K., Tian, S., Jiang, J., Wang, J., Chen, X., & Yan, F. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09908k · Cited by 165
Heteroatom-doped nanoporous carbon derived from MOF-5 for CO2 capture
Ma, X., Li, L., Chen, R., Wang, C., Li, H., & Wang, S. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2017.11.069 · Cited by 163
Efficient CO2 Capture by Porous Carbons Derived from Coconut Shell
Yang, J., Yue, L., Hu, X. D., Wang, L., Zhao, Y., Lin, Y., Sun, Y. J., DaCosta, H. F. M., & Guo, L. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00633 · Cited by 161
Bacariza, C., Graça, I., Bebiano, S. S., Lopes, J. M. F. M., & Henriques, C. (2017) · Chemical Engineering Science · doi:10.1016/j.ces.2017.09.027 · Cited by 155
Rao, N., Wang, M., Shang, Z., Hou, Y., Fan, G., & Li, J. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b02906 · Cited by 146
Development of a cost-effective CO2 adsorbent from petroleum coke via KOH activation
Jang, E., Choi, S. W., Hong, S. M., Shin, S., & Lee, K. B. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.08.075 · Cited by 142
Wei, H., Chen, J., Fu, N., Chen, H., Lin, H., & Han, S. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2017.12.192 · Cited by 139
CO2 capture using N-containing nanoporous activated carbon obtained from argan fruit shells
Boujibar, O., Souikny, A., Ghamouss, F., Achak, O., Dahbi, M., & Chafik, T. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2018.03.005 · Cited by 137
Pyrolysis characteristic and mechanism of waste tyre: A thermogravimetry-mass spectrometry analysis
Han, J., Li, W., Liu, D., Qin, L., Chen, W., & Xing, F. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.12.016 · Cited by 137
Self-citationRecent advances in the synthesis of covalent organic frameworks for CO 2 capture
Olajire, A. A. (2016) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2016.12.003 · Cited by 131
Popcorn-Derived Porous Carbon for Energy Storage and CO2Capture
Liang, T., Chen, C., Li, X., & Zhang, J. (2016) · Langmuir · doi:10.1021/acs.langmuir.6b01953 · Cited by 129
Yaumi, A. L., Bakar, M. Z. A., & Hameed, B. H. (2018) · Energy · doi:10.1016/j.energy.2018.04.183 · Cited by 113
Sivadas, D. L., Vijayan, S., Rajeev, R., Ninan, K. N., & Prabhakaran, K. (2016) · Carbon · doi:10.1016/j.carbon.2016.07.057 · Cited by 104
Danish, M., Ahmad, T., Majeed, S., Ahmad, M., Ziyang, L., Zhou, P., & Iqubal, S. M. S. (2018) · Bioresource Technology Reports · doi:10.1016/j.biteb.2018.07.007 · Cited by 101
Li, D., Zhou, J., Zhang, Z., Li, L., Tian, Y., Lu, Y., Qiao, Y., Li, J., & Wen, L. (2016) · Carbon · doi:10.1016/j.carbon.2016.12.039 · Cited by 93
Yin, F., Zhuang, L., Luo, X., & Chen, S. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.10.198 · Cited by 76
CO2 capture on KOH-activated carbons derived from yellow mombin fruit stones
Fiuza, R. A., de Andrade, R. C., & Andrade, H. M. C. (2016) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2016.09.025 · Cited by 68
Preparation and characterization of amine-functionalized sugarcane bagasse for CO2 capture
Luo, S., Chen, S., Chen, S., Zhuang, L., Ma, N., Xu, T., Li, Q., & Hou, X. (2015) · Journal of Environmental Management · doi:10.1016/j.jenvman.2015.09.033 · Cited by 60
Ultra-microporous N-doped carbon from polycondensed framework precursor for CO2 adsorption
Tian, Z., Huang, J., Zhang, X., Shao, G., He, Q., Cao, S., & Yuan, S. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.08.012 · Cited by 59
Enhanced CO2 Adsorption on Nitrogen-Doped Porous Carbons Derived from Commercial Phenolic Resin
Yue, L., Rao, L., Wang, L., Sun, Y. J., Wu, Z., DaCosta, H. F. M., & Hu, X. D. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b03646 · Cited by 56
Abid, H. R., Rada, Z. H., Duan, X., Sun, H., & Wang, S. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b03240 · Cited by 54
Hydrothermal synthesis of N-doped spherical carbon from carboxymethylcellulose for CO 2 capture
Wu, Q., Li, W., Liu, S., & Jin, C. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.02.022 · Cited by 53
Valorization of coffee grounds into activated carbon using physic—chemical activation by KOH/CO 2
Laksaci, H., Khelifi, A., Belhamdi, B., & Trari, M. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.09.036 · Cited by 52
Preparation of nitrogen doped carbon from tree leaves as efficient CO2 adsorbent
Xu, J., Shi, J., Cui, H., Yan, N., & Liu, Y. (2018) · Chemical Physics Letters · doi:10.1016/j.cplett.2018.09.038 · Cited by 43
Manmuanpom, N., Thubsuang, U., Dubas, S. T., Wongkasemjit, S., & Chaisuwan, T. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.07.004 · Cited by 35
Puthiaraj, P., & Ahn, W. (2017) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2017.07.012 · Cited by 34
Activated polypyrrole-derived carbon spheres for superior CO2 uptake at ambient conditions
Dassanayake, A. C., & Jaroniec, M. (2018) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2018.04.002 · Cited by 26
Tian, K., Wu, Z., Xie, F., Hu, W. W., & Li, L. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b02223 · Cited by 25
Cited by
Insight into activated carbon from different kinds of chemical activating agents: A review
Gao, Y., Yue, Q., Gao, B., & Li, A. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141094 · Cited by 681
Porous activated carbons derived from waste sugarcane bagasse for CO2 adsorption
Guo, Y., Tan, C., Sun, J., Li, W., Zhang, J., & Zhao, C. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122736 · Cited by 519
Activated carbons from biomass-based sources for CO2 capture applications
Abuelnoor, N., AlHajaj, A., Khaleel, M., Vega, L. F., & Abu-Zahra, M. R. M. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.131111 · Cited by 310
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
Han, J., Liang, Y., Zhao, B., Wang, Y., Xing, F., & Qin, L. (2019) · Environmental Pollution · doi:10.1016/j.envpol.2019.05.022 · Cited by 265
Self-citation
Metadata
- Authors
- Han, J., Zhang, L., Zhao, B., Qin, L., Wang, Y., & Xing, F.
- Venue
- Industrial Crops and Products
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 128
- Pages
- 290-297
- ISSN
- 0926-6690 (ISSN-L)
- OpenAlex
- W2901562722
- Cited by
- 267
- References
- 46
- FWCI
- 12.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.