The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Pyrolysis behaviors of wood and its constituent polymers at gasification temperature
Open accessAbstract
Abstract Pyrolysis behavior of wood at gasification temperature (800 °C) was investigated focusing on the behaviors of the wood constituent polymers [cellulose, hemicellulose (glucomannan and xylan) and lignin (milled wood lignin)]. Tar compositions ( iso -propanol-soluble and water-soluble tar fractions), which were characterized with GPC, GC–MS, GC-FID (oxime-TMS analysis), capillary electrophoresis and 1 H NMR analysis, were quite different between wood polysaccharides and lignin. Furthermore, comparison of the tar- and secondary char-forming behaviors indicated that comparatively stable primary tar from wood polysaccharides undergo secondary reactions including carbonization after condensation at the reactor wall with lower temperature than their boiling points, while that primary tar from lignin is more reactive to give the vapor phase carbonization products during volatilization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pyrolysis kinetics of lignocellulosic materials—three independent reactions model
Orfão, J. J. M., Antunes, F. J. A., & Figueiredo, J. L. (1999) · Fuel · doi:10.1016/s0016-2361(98)00156-2 · Cited by 771
Pyrolysis characteristics of biomass and biomass components
Raveendran, K. (1996) · Fuel · doi:10.1016/0016-2361(96)00030-0 · Cited by 693
Kinetic modeling of biomass pyrolysis
Várhegyi, G., Antal, M. J., Jakab, E., & Szabó, P. (1997) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(96)00971-0 · Cited by 545
Kawamoto, H., Murayama, M., & Saka, S. (2003) · Journal of Wood Science · doi:10.1007/s10086-002-0487-5 · Cited by 229
Self-citation
Cited by
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
Wang, S., Dai, G., Yang, H., & Luo, Z. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.05.004 · Cited by 2,595
Kan, T., Strezov, V., & Evans, T. J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.185 · Cited by 2,239
Collard, F.-X., & Blin, J. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.06.013 · Cited by 1,905
Hu, X., & Gholizadeh, M. (2019) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2019.01.024 · Cited by 671
Al-Rumaihi, A., Shahbaz, M., Mckay, G., Mackey, H., & Al-Ansari, T. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112715 · Cited by 650
Study on the pyrolytic behaviour of xylan-based hemicellulose using TG–FTIR and Py–GC–FTIR
Shen, D. K., Gu, S., & Bridgwater, A. V. (2010) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.12.001 · Cited by 585
Kumar, R., Strezov, V., Weldekidan, H., He, J., Singh, S., Kan, T., & Dastjerdi, B. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109763 · Cited by 542
The pyrolytic degradation of wood-derived lignin from pulping process
Shen, D. K., Gu, S., Luo, K. H., Wang, S. R., & Fang, M. X. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.02.078 · Cited by 452
Hosoya, T., Kawamoto, H., & Saka, S. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2007.01.006 · Cited by 448
Self-citationInfluence of the interaction of components on the pyrolysis behavior of biomass
Wang, S., Guo, X., Wang, K., & Luo, Z. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.02.006 · Cited by 446
Wang, W., Lemaire, R., Bensakhria, A., & Luart, D. (2022) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2022.105479 · Cited by 429
A Critical Review on Hemicellulose Pyrolysis
Zhou, X., Li, W., Mabon, R., & Broadbelt, L. J. (2017) · Energy Technology · doi:10.1002/ente.201600327 · Cited by 419
An Overview of Recent Developments in Biomass Pyrolysis Technologies
Uddin, M. N., Techato, K., Taweekun, J., Rahman, M. M., Rasul, M. G., Mahlia, T. M. I., & Ashrafur, S. M. (2018) · Energies · doi:10.3390/en11113115 · Cited by 377
S, R., & P, B. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.11.041 · Cited by 346
The thermal performance of the polysaccharides extracted from hardwood: Cellulose and hemicellulose
Shen, D. K., Gu, S., & Bridgwater, A. V. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.04.018 · Cited by 320
Kinetic study on thermal decomposition of woods in oxidative environment
Shen, D. K., Gu, S., Luo, K. H., Bridgwater, A. V., & Fang, M. X. (2009) · Fuel · doi:10.1016/j.fuel.2008.10.034 · Cited by 309
Pyrolysis of poplar wood sawdust by TG-FTIR and Py–GC/MS
Gu, X., Ma, X., Li, L., Liu, C., Cheng, K., & Li, Z. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.04.009 · Cited by 308
Thermal reactions of guaiacol and syringol as lignin model aromatic nuclei
Asmadi, M., Kawamoto, H., & Saka, S. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.04.011 · Cited by 299
Self-citationShen, D., Jin, W., Hu, J., Xiao, R., & Luo, K. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.06.054 · Cited by 284
Recent Development in Chemical Depolymerization of Lignin: A Review
Wang, H., Tucker, M., & Ji, Y. (2013) · Journal of Applied Chemistry · doi:10.1155/2013/838645 · Cited by 260
A mechanistic model of fast pyrolysis of hemicellulose
Zhou, X., Li, W., Mabon, R., & Broadbelt, L. J. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03208k · Cited by 240
Gas- and solid/liquid-phase reactions during pyrolysis of softwood and hardwood lignins
Asmadi, M., Kawamoto, H., & Saka, S. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.08.003 · Cited by 169
Self-citationThermal reactivities of catechols/pyrogallols and cresols/xylenols as lignin pyrolysis intermediates
Asmadi, M., Kawamoto, H., & Saka, S. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.04.012 · Cited by 136
Self-citationQin, L., Wu, Y., Hou, Z., & Jiang, E. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123682 · Cited by 131
Influence of Interactions among Three Biomass Components on the Pyrolysis Behavior
Zhao, S., Liu, M., Zhao, L., & Zhu, L. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b00593 · Cited by 108
Influence of Pyrolysis Operating Conditions on Bio-Oil Components: A Microscale Study in a Pyroprobe
Thangalazhy-Gopakumar, S., Adhikari, S., Gupta, R. B., & Fernando, S. D. (2011) · Energy & Fuels · doi:10.1021/ef101032s · Cited by 81
Metadata
- Authors
- Hosoya, T., Kawamoto, H., & Saka, S.
- Venue
- Journal of Analytical and Applied Pyrolysis
- Publisher
- Elsevier BV
- Published
- 2007-03
- Volume
- 78
- Issue
- 2
- Pages
- 328-336
- ISSN
- 0165-2370 (ISSN-L)
- OpenAlex
- W2052366584
- Cited by
- 245
- References
- 4
- FWCI
- 5.12
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.