Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.

Influence of Pyrolysis Operating Conditions on Bio-Oil Components: A Microscale Study in a Pyroprobe

Thangalazhy-Gopakumar, Suchithra, Adhikari, Sushil, Gupta, Ram B., Fernando, Sandun D. · 2011 · Energy & Fuels

Abstract

A fast pyrolysis process has emerged as one of the techniques to produce transportation fuels using various biomass types that are regionally important. It is well understood that high heating rates, very small particles with low mass transfer limitations, and moderate operating temperatures are essential for obtaining high yield of liquid from the fast pyrolysis process. However, how the heating rates and operating temperatures would influence individual compounds in the liquid obtained from the fast pyrolysis process has not been studied in detail. Therefore, a microscale pyrolysis study was performed by changing different parameters (biomass type, filament heating rate, and final pyrolysis temperature) to understand the influence of these operating parameters on each compound formed during the process. Two biomass types (pine wood and switchgrass) were selected for this study: (i) pine wood was selected because of its availability in the southeastern region of the United States, and (ii) switchgrass was chosen because it has been identified as one of the bioenergy crops in the United States. Pyrolysis temperatures were changed from 450 to 750 °C in increments of 50 °C, whereas the heating rates selected were 50, 100, 500, 1000, and 2000 °C/s. Twenty-eight bio-oil compounds were quantified in each experimental condition. This study found that phenols and toluene concentrations increased with the increase in pyrolysis temperature irrespective to the biomass type. On the other hand, the change in the yield of ketones, furans, and guaiacols with the change in pyrolysis temperature depended on the type of biomass. The effect of filament heating rate on bio-oil yield was not statistically significant because the biomass heating rate was almost constant irrespective of different filament heating rates.

Overview

Integrity signals

Registry

Crossref · 10.1021/ef101032s

Cites

54 of 54 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 54 references

Research works printed but not linked: 8

  1. Bridgwater, A. V.; Czernik, S. Diebold, J. Meier, D.; Oasamaa, A. Peacck, C. Piskorz, J. Radlein, D.Fast Pyrolysis of Biomass: A Handbook;CPL Press:Newbury, 2008; p34.
  2. Pattiya A., 2008, J. Anal. Appl. Pyrolysis, 81
  3. Kilzer F. J., 1965, Pyrodynamics, 2, 151
  4. Shafizadeh F., 1975, Appl. Polym. Symp., 28, 153
  5. Liao Y.-f., 2004, Pap.-Am. Chem. Soc., Div. Fuel Chem., 49, 407
  6. Bahng M.-K., 2009, Pap.-Am. Chem. Soc., Div. Fuel Chem., 54, 367
  7. Nimlos M. R., 2002, Fuel Chem. Div. Prepr., 47, 393
  8. Hwang, B.h.; Obst, J. R. Proceedings of the International Conference on Forest Products Better Utilization of Wood for Human, Earth and Future, Daejeon, Korea;The Korean Society of Wood Science and Technology, International Association of Wood Products Societies, 2003.

Cited by

See all 81

Metadata

Authors
Thangalazhy-Gopakumar, S., Adhikari, S., Gupta, R. B., & Fernando, S. D.
Affiliations
  • Auburn University (US)
  • Texas A&M University (US)
Corresponding author
Adhikari, Sushil
Venue
Energy & Fuels
Published
2011-01-31
Volume
25
Issue
3
Pages
1191-1199
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W2325092817
Cited by
81
References
54
Citations by year
2026: 1 · 2025: 1 · 2024: 3 · 2023: 5 · 2022: 4 · 2021: 4 · 2020: 7 · 2019: 4 · 2018: 6 · 2017: 7 · 2016: 6 · 2015: 9 · 2014: 8 · 2013: 7 · 2012: 7
FWCI
4.54
Type
journal article
Language
en
Open access
closed
Locations
Energy & Fuels (publishedVersion)
Funders
Auburn University
Topics
  • Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
  • Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Advanced Combustion Engine Technologies
  • Physical Sciences › Energy › Fuel Technology › Biodiesel Production and Applications
Keywords
fast pyrolysis, bio-oil composition, heating rate, pyrolysis temperature, pine forest, switchgrass, phenols, toluene, ketones, furan, guaiacol, filament heating, biofuels

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Influence of Pyrolysis Operating Conditions on Bio-Oil Components: A Microscale Study in a Pyroprobe. https://app.cochat.ai/papers/10.1021/ef101032s
The paper
Thangalazhy-Gopakumar, S., Adhikari, S., Gupta, R. B., & Fernando, S. D. (2011). Influence of Pyrolysis Operating Conditions on Bio-Oil Components: A Microscale Study in a Pyroprobe. Energy & Fuels. https://doi.org/10.1021/ef101032s

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.