Reverse polymerization of waste polystyrene through microwave assisted pyrolysis
The DOI matches its Crossref record.
Abstract
Abstract Reverse polymerization of waste polystyrene (PS) was exploited to produce styrene and other aromatics through microwave assisted pyrolysis (MAP), due to the benefits associated with microwave (MW) heating. MAP of PS was run by varying MW power and absorber (tire and carbonaceous char from MAP of tire). A clear and low viscosity liquid containing styrene was always collected as the major product, together with low amount of char and gas. Using a MW power of 3 kW and 100 g of PS together with 47.3 g of carbon gave a liquid (yield 86.5%) containing higher amount of single ring aromatic compounds, as evaluated by GC–MS (aromatics C6–C10 93.9%, styrene 66.0%) a char (yield 9.8%) and a gas (yield 3.7%). Improvements in residence time, by using low MW power or a fractionating system directly inserted over the oven and before the collecting system, allowed us to obtain a liquid with low viscosity and density even if the char yield was 10.0%. Liquid was characterized through physical (density, viscosity, high heating value), and chemical tests (elemental analysis, GC–MS and FT-IR).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
A review on catalytic pyrolysis of plastic wastes to high-value products
Peng, Y., Wang, Y., Ke, L., Dai, L., Wu, Q., Cobb, K., Zeng, Y., Zou, R., Liu, Y., & Ruan, R. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115243 · Cited by 538
Pyrolysis of Polystyrene Waste: A Review
Maafa, I. (2021) · Polymers · doi:10.3390/polym13020225 · Cited by 311
Plastic waste as pyrolysis feedstock for plastic oil production: A review
Chang, S. H. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.162719 · Cited by 302
Ding, K., Liu, S., Huang, Y., Liu, S., Zhou, N., Peng, P., Wang, Y., Chen, P., & Ruan, R. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.07.001 · Cited by 294
Metadata
- Authors
- Undri, A., Frediani, M., Rosi, L., & Frediani, P.
- Venue
- Journal of Analytical and Applied Pyrolysis
- Publisher
- Elsevier BV
- Published
- 2014-01
- Volume
- 105
- Pages
- 35-42
- ISSN
- 0165-2370 (ISSN-L)
- OpenAlex
- W1996082356
- Cited by
- 144
- References
- 0
- FWCI
- 3.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Reverse polymerization of waste polystyrene through microwave assisted pyrolysis. https://app.cochat.ai/papers/10.1016/j.jaap.2013.10.001
- The paper
- Undri, A., Frediani, M., Rosi, L., & Frediani, P. (2014). Reverse polymerization of waste polystyrene through microwave assisted pyrolysis. Journal of Analytical and Applied Pyrolysis. https://doi.org/10.1016/j.jaap.2013.10.001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.