The DOI matches its Crossref record; 89 of the 89 references it cites were found in a registry or an index.
Pyrolysis of Polystyrene Waste: A Review
Open accessAbstract
The manufacturing of polystyrene around the globe has escalated in the past years due to its huge applications in various areas. The perpetual market needs of polystyrene led the polystyrene wastes accretion in the landfill causing environmental deterioration. The soaring need for polystyrene also led to the exhaustion of petroleum, a non-renewable energy source, as polystyrene is a petroleum-derived product. Researchers from around the world have discovered a few techniques to take care of the polystyrene scraps, namely recycling and energy recovery techniques. Nevertheless, there are demerits involved with recycling techniques, such as they call for huge labor expenses in the separation process and cause water pollution, thereby decreasing the process sustainability. Owing to these demerits, the researchers have focused their attention on the energy recovery technique. Since petroleum is the main ingredient of polystyrene synthesis, the restoration of liquid oil from polystyrene via the pyrolysis method is a promising technique as the recovered oil has greater calorific value as compared to commercially available fuel. The present paper surveys the pyrolysis technique for polystyrene and the important process parameters that control the end product, like oil, gas, and char. The chief process parameters that are discussed in this review paper include the type of reactors, temperature, residence time, pressure, catalyst types, type of fluidizing gases, and their flow rate. A more recent technique of utilizing a solvent to perform pyrolysis and the effect of various process conditions on the product yield have been discussed. Apart from this, various outlooks to optimize the liquid oil recovery from polystyrene are also reviewed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Elements of chemical reaction engineering
Scott Fogler, H. (1987) · Chemical Engineering Science · doi:10.1016/0009-2509(87)80130-6 · Cited by 3,110
Hydrothermal liquefaction of biomass: A review of subcritical water technologies
Toor, S. S., Rosendahl, L., & Rudolf, A. (2011) · Energy · doi:10.1016/j.energy.2011.03.013 · Cited by 1,840
Webb, H., Arnott, J., Crawford, R., & Ivanova, E. (2012) · Polymers · doi:10.3390/polym5010001 · Cited by 958
Panda, A. K., Singh, R. K., & Mishra, D. K. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.005 · Cited by 956
A review on co-pyrolysis of biomass: An optional technique to obtain a high-grade pyrolysis oil
Abnisa, F., & Wan Daud, W. M. A. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.07.007 · Cited by 903
Handbook of Fluidization and Fluid-Particle Systems
(2003) · CRC Press eBooks · doi:10.1201/9780203912744 · Cited by 772
Onwudili, J. A., Insura, N., & Williams, P. T. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.07.008 · Cited by 681
Pyrolysis of municipal plastic wastes for recovery of gasoline-range hydrocarbons
Demirbas, A. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.03.001 · Cited by 579
Catalytic co-pyrolysis of lignocellulosic biomass with polymers: a critical review
Zhang, X., Lei, H., Chen, S., & Wu, J. (2016) · Green Chemistry · doi:10.1039/c6gc00911e · Cited by 497
Cited by
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
A review on catalytic pyrolysis of plastic wastes to high-value products
Peng, Y., Wang, Y., Ke, L., Dai, L., Wu, Q., Cobb, K., Zeng, Y., Zou, R., Liu, Y., & Ruan, R. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115243 · Cited by 538
Holistic utilization of waste plastics through a tandem process
Dai, L., Karakas, O., Lata, S., Cobb, K., Lei, H., He, C., Cheng, Y., Chen, P., & Ruan, R. (2023) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2023.110547 · Cited by 12
Metadata
- Authors
- Maafa, I.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-01-11
- Volume
- 13
- Issue
- 2
- Pages
- 225
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3118539598
- Cited by
- 311
- References
- 89
- FWCI
- 12.04
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Pyrolysis of Polystyrene Waste: A Review. https://app.cochat.ai/papers/10.3390/polym13020225
- The paper
- Maafa, I. (2021). Pyrolysis of Polystyrene Waste: A Review. Polymers. https://doi.org/10.3390/polym13020225
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.