The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Laser additive manufacturing of FeCrCoMnNi high-entropy alloy: Effect of heat treatment on microstructure, residual stress and mechanical property
Abstract
Abstract High entropy alloys (HEAs) have attracted much attention and been considered as novel materials with wide application prospects due to their outstanding comprehensive properties. With the development of laser processing technology, laser additive manufacturing (LAM) is regarded as a particularly feasible way to fabricate high entropy alloys. In this study, a relatively dense equiatomic FeCrCoMnNi high entropy alloy with excellent mechanical properties is manufactured by LAM successfully. Effect of heat treatment on phase, microstructure, microhardness, residual stress and mechanical properties of as-built (AB) specimens are investigated. The results show that the AB specimen exhibits a single FCC solid solution with mixed epitaxial grown dendrite columnar grain and equiaxed grain microstructure. After heat treatment, the dendritic microstructure of AB specimen evolves into recrystallized grain structure of HT-1100 specimen (heat treated at 1100 °C), while the crystalline structure is hardly changed. The AB specimen exhibits a superior microhardness and mechanical properties to that of the corresponding arc-melting specimen. The HTed specimen has much higher ductility than that of the AB specimen without distinct sacrifice of strength.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Fundamentals of Solidification
Kurz, W., & Fisher, D. J. (2012) · ASM International eBooks · doi:10.31399/asm.tb.pdub.t53420429 · Cited by 3,287
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Residual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
Fundamentals of Solidification: Fourth Revised Edition
Kurz, W., & Fisher, D. J. (1998) · Retrospective Collection · doi:10.4028/www.scientific.net/rc.35 · Cited by 1,955
Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.07.022 · Cited by 1,896
Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys
Chuang, M.-H., Tsai, M.-H., Wang, W.-R., Lin, S.-J., & Yeh, J.-W. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.06.041 · Cited by 1,481
Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys
Otto, F., Yang, Y., Bei, H., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.01.042 · Cited by 1,445
Yeh, J.-W., Lin, S.-J., Chin, T.-S., Gan, J.-Y., Chen, S.-K., Shun, T.-T., Tsau, C.-H., & Chou, S.-Y. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-0234-4 · Cited by 1,252
Tensile properties of high- and medium-entropy alloys
Gali, A., & George, E. P. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.03.018 · Cited by 1,194
Single-crystal laser deposition of superalloys: processing–microstructure maps
Gäumann, M., Bezençon, C., Canalis, P., & Kurz, W. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00367-0 · Cited by 1,091
Otto, F., Dlouhý, A., Pradeep, K. G., Kuběnová, M., Raabe, D., Eggeler, G., & George, E. P. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.04.005 · Cited by 932
Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy
Liu, W. H., Wu, Y., He, J. Y., Nieh, T. G., & Lu, Z. P. (2013) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.12.002 · Cited by 916
Jia, Q., & Gu, D. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.09.171 · Cited by 905
Dinda, G. P., Dasgupta, A. K., & Mazumder, J. (2009) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.01.009 · Cited by 858
Li, Y., & Gu, D. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.07.006 · Cited by 824
The microstructure and mechanical properties of deposited-IN718 by selective laser melting
Wang, Z., Guan, K., Gao, M., Li, X., Chen, X., & Zeng, X. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.10.107 · Cited by 812
Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys
Hemphill, M. A., Yuan, T., Wang, G. Y., Yeh, J. W., Tsai, C. W., Chuang, A., & Liaw, P. K. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.06.046 · Cited by 811
Hardened austenite steel with columnar sub-grain structure formed by laser melting
Saeidi, K., Gao, X., Zhong, Y., & Shen, Z. J. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.12.018 · Cited by 796
Cherry, J. A., Davies, H. M., Mehmood, S., Lavery, N. P., Brown, S. G. R., & Sienz, J. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6297-2 · Cited by 755
Yao, M. J., Pradeep, K. G., Tasan, C. C., & Raabe, D. (2014) · Scripta Materialia · doi:10.1016/j.scriptamat.2013.09.030 · Cited by 685
A study on the residual stress during selective laser melting (SLM) of metallic powder
Liu, Y., Yang, Y., & Wang, D. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-8466-y · Cited by 573
Li, R., Niu, P., Yuan, T., Cao, P., Chen, C., & Zhou, K. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.02.298 · Cited by 572
Alloying behavior in multi-component AlCoCrCuFe and NiCoCrCuFe high entropy alloys
Sathiyamoorthi, P., Murty, B. S., & Kottada, R. S. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2011.11.044 · Cited by 411
Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating
Ye, Q., Feng, K., Li, Z., Lu, F., Li, R., Huang, J., & Wu, Y. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2016.11.176 · Cited by 408
Vilaro, T., Colin, C., Bartout, J. D., Nazé, L., & Sennour, M. (2012) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.11.092 · Cited by 381
Zhang, B., Dembinski, L., & Coddet, C. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.06.055 · Cited by 370
Insights into the phase diagram of the CrMnFeCoNi high entropy alloy
Laurent-Brocq, M., Akhatova, A., Perrière, L., Chebini, S., Sauvage, X., Leroy, E., & Champion, Y. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.01.068 · Cited by 361
Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy
Liu, F., Lin, X., Yang, G., Song, M., Chen, J., & Huang, W. (2010) · Optics & Laser Technology · doi:10.1016/j.optlastec.2010.06.015 · Cited by 348
Twinning induced plasticity in austenitic stainless steel 316L made by additive manufacturing
Pham, M. S., Dovgyy, B., & Hooper, P. A. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.07.082 · Cited by 348
Borkar, T., Gwalani, B., Choudhuri, D., Mikler, C. V., Yannetta, C. J., Chen, X., Ramanujan, R. V., Styles, M. J., Gibson, M. A., & Banerjee, R. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.025 · Cited by 322
Mutua, J., Nakata, S., Onda, T., & Chen, Z.-C. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.042 · Cited by 315
Wang, R., Zhang, K., Davies, C., & Wu, X. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.10.138 · Cited by 306
Ji, W., Fu, Z., Wang, W., Wang, H., Zhang, J., Wang, Y., & Zhang, F. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.11.146 · Cited by 290
Processing and properties of nanocrystalline CuNiCoZnAlTi high entropy alloys by mechanical alloying
Varalakshmi, S., Kamaraj, M., & Murty, B. S. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.09.019 · Cited by 267
Alloying behavior, microstructure and mechanical properties in a FeNiCrCo0.3Al0.7 high entropy alloy
Chen, W., Fu, Z., Fang, S., Xiao, H., & Zhu, D. (2013) · Materials & Design · doi:10.1016/j.matdes.2013.04.061 · Cited by 255
Chew, Y., Bi, G. J., Zhu, Z. G., Ng, F. L., Weng, F., Liu, S. B., Nai, S. M. L., & Lee, B. Y. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.12.005 · Cited by 249
Joo, S.-H., Kato, H., Jang, M. J., Moon, J., Kim, E. B., Hong, S.-J., & Kim, H. S. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.12.010 · Cited by 227
Zhang, M., Sun, C.-N., Zhang, X., Goh, P. C., Wei, J., Hardacre, D., & Li, H. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.07.071 · Cited by 221
Formation of ordered/disordered nanoparticles in FCC high entropy alloys
Shun, T.-T., Hung, C.-H., & Lee, C.-F. (2010) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2009.12.071 · Cited by 219
Haase, C., Tang, F., Wilms, M. B., Weisheit, A., & Hallstedt, B. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.01.099 · Cited by 200
Kudzal, A., McWilliams, B., Hofmeister, C., Kellogg, F., Yu, J., Taggart-Scarff, J., & Liang, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.07.047 · Cited by 191
Song, B., Dong, S., Liu, Q., Liao, H., & Coddet, C. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.08.085 · Cited by 189
Sun, G., Zhou, R., Lu, J., & Mazumder, J. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.09.028 · Cited by 177
Phase stability and tensile properties of Co-free Al0.5CrCuFeNi2 high-entropy alloys
Ng, C., Guo, S., Luan, J., Wang, Q., Lu, J., Shi, S., & Liu, C. T. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.09.105 · Cited by 175
Jiang, L., Lu, Y., Dong, Y., Wang, T., Cao, Z., & Li, T. (2014) · Intermetallics · doi:10.1016/j.intermet.2013.08.016 · Cited by 167
Prabhakaran, S., Kulkarni, A. P., Gopal, V., Kalainathan, S., Shukla, P. P., & Vasudevan, V. K. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.09.138 · Cited by 151
Qiu, Z., Yao, C., Feng, K., Li, Z., & Chu, P. K.-H. (2018) · International Journal of Lightweight Materials and Manufacture · doi:10.1016/j.ijlmm.2018.02.001 · Cited by 136
Dirras, G. F., Gubicza, J., Heczel, A., Lilensten, L., Couzinié, J., Perrière, L., Guillot, I., & Hocini, A. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.08.007 · Cited by 133
Fu, Z., Chen, W., Fang, S., Zhang, D., Xiao, H., & Zhu, D. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.11.146 · Cited by 120
Gu, D., Ma, J., Chen, H., Lin, K., & Xi, L. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.03.008 · Cited by 108
Microstructures and deformation mechanisms of Cr26Mn20Fe20Co20Ni14 alloys
Ming, K., Bi, X., & Wang, J. (2017) · Materials Characterization · doi:10.1016/j.matchar.2017.10.022 · Cited by 78
Pratt, P., Felicelli, S. D., Wang, L., & Hubbard, C. R. (2008) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-008-9660-9 · Cited by 63
Cited by
Multi‐Material 3D and 4D Printing: A Survey
Rafiee, M., Farahani, R. D., & Therriault, D. (2020) · Advanced Science · doi:10.1002/advs.201902307 · Cited by 662
Heat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Recent Advances on High‐Entropy Alloys for 3D Printing
Han, C., Fang, Q., Shi, Y., Tor, S. B., Chua, C. K., & Zhou, K. (2020) · Advanced Materials · doi:10.1002/adma.201903855 · Cited by 486
Additive manufacturing of high entropy alloys: A practical review
Ostovari Moghaddam, A., Shaburova, N. A., Samodurova, M. N., Abdollahzadeh, A., & Trofimov, E. A. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.11.029 · Cited by 474
Metadata
- Authors
- Tong, Z., Ren, X., Jiao, J., Zhou, W., Ren, Y., Ye, Y., Larson, E. A., & Gu, J.
- Venue
- Journal of Alloys and Compounds
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 785
- Pages
- 1144-1159
- ISSN
- 0925-8388 (ISSN-L)
- OpenAlex
- W2910136962
- Cited by
- 304
- References
- 55
- FWCI
- 19.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.