The DOI matches its Crossref record.
Fatigue and fracture behaviour of laser powder bed fusion stainless steel 316L: Influence of processing parameters
Open accessAbstract
The laser powder bed fusion (L-PBF) process involves a large number of processing parameters. Extending the intricate relationship between processing and structure to mechanical performance is essential for structural L-PBF materials. The high cycle fatigue properties of L-PBF parts are very sensitive to process-induced porosities which promote premature failure through the crack initiation mechanisms. Results from this work show that for stainless steel 316 L, porosity does not impinge on the high cycle fatigue properties when processing is kept within a ±30% tolerance band. In this ‘optimum’ processing region, crack initiation takes place due to defects at the solidification microstructure level. Beyond the ‘optimum’ processing region, over-melting and under-melting can lead to porosity-driven cracking and inferior fatigue resistance. In addition, regardless of the processing condition, fatigue resistance was found to follow a direct linear relationship with ductility and tensile strength in the low and high stress fatigue regimes respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Fayazfar, H., Salarian, M., Rogalsky, A., Sarker, D., Russo, P., Paserin, V., & Toyserkani, E. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.018 · Cited by 665
Narasimharaju, S. R., Zeng, W., See, T. L., Zhu, Z., Scott, P., Jiang, X., & Lou, S. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.12.033 · Cited by 508
Metal additive manufacturing in structural engineering – review, advances, opportunities and outlook
Gardner, L. (2023) · Structures · doi:10.1016/j.istruc.2022.12.039 · Cited by 398
Choo, H., Sham, K.-L., Bohling, J., Ngo, A., Xiao, X., Ren, Y., Depond, P. J., Matthews, M. J., & Garlea, E. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.12.006 · Cited by 333
Kan, W. H., Chiu, L. N. S., Lim, C. V. S., Zhu, Y., Tian, Y., Jiang, D., & Huang, A. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-06990-7 · Cited by 309
Metadata
- Authors
- Zhang, M., Sun, C.-N., Zhang, X., Goh, P. C., Wei, J., Hardacre, D., & Li, H.
- Venue
- Materials Science and Engineering: A
- Publisher
- Elsevier BV
- Published
- 2017-08
- Volume
- 703
- Pages
- 251-261
- ISSN
- 0921-5093 (ISSN-L)
- OpenAlex
- W2737917991
- Cited by
- 221
- References
- 0
- FWCI
- 9.49
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fatigue and fracture behaviour of laser powder bed fusion stainless steel 316L: Influence of processing parameters. https://app.cochat.ai/papers/10.1016/j.msea.2017.07.071
- The paper
- Zhang, M., Sun, C.-N., Zhang, X., Goh, P. C., Wei, J., Hardacre, D., & Li, H. (2017). Fatigue and fracture behaviour of laser powder bed fusion stainless steel 316L: Influence of processing parameters. Materials Science and Engineering: A. https://doi.org/10.1016/j.msea.2017.07.071
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.