The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Experimental investigation and empirical modelling of FDM process for compressive strength improvement
Open accessAbstract
Fused deposition modelling (FDM) is gaining distinct advantage in manufacturing industries because of its ability to manufacture parts with complex shapes without any tooling requirement and human interface. The properties of FDM built parts exhibit high dependence on process parameters and can be improved by setting parameters at suitable levels. Anisotropic and brittle nature of build part makes it important to study the effect of process parameters to the resistance to compressive loading for enhancing service life of functional parts. Hence, the present work focuses on extensive study to understand the effect of five important parameters such as layer thickness, part build orientation, raster angle, raster width and air gap on the compressive stress of test specimen. The study not only provides insight into complex dependency of compressive stress on process parameters but also develops a statistically validated predictive equation. The equation is used to find optimal parameter setting through quantum-behaved particle swarm optimization (QPSO). As FDM process is a highly complex one and process parameters influence the responses in a non linear manner, compressive stress is predicted using artificial neural network (ANN) and is compared with predictive equation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The particle swarm - explosion, stability, and convergence in a multidimensional complex space
Clerc, M., & Kennedy, J. (2002) · IEEE Transactions on Evolutionary Computation · doi:10.1109/4235.985692 · Cited by 9,017
A direct adaptive method for faster backpropagation learning: the RPROP algorithm
Riedmiller, M., & Braun, H. (2002) · IEEE International Conference on Neural Networks · doi:10.1109/icnn.1993.298623 · Cited by 3,917
Neural Network Toolbox™ User's Guide
Beale, M. H., Hagan, M., & Demuth, H. B. (2015) · Cited by 1,639
Design and Analysis of Experiments, 5th Ed.
Copeland, K. A. F. (2001) · Journal of Quality Technology · doi:10.1080/00224065.2001.11980088 · Cited by 1,475
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,318
Self-citationEffect of processing conditions on the bonding quality of FDM polymer filaments
Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810862028 · Cited by 1,277
Design and Analysis of Experiments
Gupta, A. K., & Kabe, D. G. (2013) · WORLD SCIENTIFIC eBooks · doi:10.1142/8889 · Cited by 1,241
Rapid Prototyping, Principles and Applications
(2010) · Assembly Automation · doi:10.1108/aa.2010.03330dae.001 · Cited by 692
Effect of Layer Orientation on Mechanical Properties of Rapid Prototyped Samples
Es-Said, O. S., Foyos, J., Noorani, R., Mendelson, M., Marloth, R., & Pregger, B. A. (2000) · Materials and Manufacturing Processes · doi:10.1080/10426910008912976 · Cited by 577
Coelho, L. D. S. (2010) · Expert Systems with Applications · doi:10.1016/j.eswa.2009.06.044 · Cited by 544
Freeform Construction: Mega-scale Rapid Manufacturing for construction
Buswell, R. A., Soar, R. C., Gibb, A. G. F., & Thorpe, A. (2007) · Automation in Construction · doi:10.1016/j.autcon.2006.05.002 · Cited by 536
NEURAL NETWORKS, FUZZY LOGIC, AND GENETIC ALGORITHMS : SYNTHESIS AND APPLICATIONS
Rajasekaran, S., & Pai, G. A. V. (2013) · Medical Entomology and Zoology · Cited by 467
The rapid prototyping technologies
Upcraft, S., & Fletcher, R. (2003) · Assembly Automation · doi:10.1108/01445150310698634 · Cited by 367
A model research for prototype warp deformation in the FDM process
Wang, T.-M., Xi, J.-T., & Jin, Y. (2007) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-006-0556-9 · Cited by 331
Zhang, Y., & Chou, K. (2008) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/09544054jem990 · Cited by 321
An improved quantum-behaved particle swarm optimization algorithm with weighted mean best position
Xi, M., Sun, J., & Xu, W. (2008) · Applied Mathematics and Computation · doi:10.1016/j.amc.2008.05.135 · Cited by 261
Omkar, S. N., Khandelwal, R., Ananth, T. V. S., Narayana Naik, G., & Gopalakrishnan, S. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2009.03.006 · Cited by 205
A model research for prototype warp deformation in the FDM process
Wang, T.-M., Xi, J.-T., & Jin, Y. (2007) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-006-0878-7 · Cited by 199
Parametric appraisal of fused deposition modelling process using the grey Taguchi method
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/09544054jem1565 · Cited by 163
Self-citationPrediction of properties of waste AAC aggregate concrete using artificial neural network
Topçu, İ. B., & Sarıdemir, M. (2007) · Computational Materials Science · doi:10.1016/j.commatsci.2007.03.010 · Cited by 160
Rochus, P., Plesseria, J.-Y., Van Elsen, M., Kruth, J.-P., Carrus, R., & Dormal, T. (2007) · Acta Astronautica · doi:10.1016/j.actaastro.2007.01.004 · Cited by 141 · cited 1×
“This result in their applications in functional prototype development [2], medical [3,4], automobile industries [5], construction industries [6], space applications [7], tool and die making [8] and many more.”
Background
Cited by
Additive manufacturing methods and modelling approaches: a critical review
Bikas, H., Stavropoulos, P., & Chryssolouris, G. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7576-2 · Cited by 1,427
Mechanical characterization of 3D-printed polymers
Dizon, J. R. C., Espera, A. H., Chen, Q., & Advincula, R. C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.002 · Cited by 1,340
FDM process parameters influence over the mechanical properties of polymer specimens: A review
Popescu, D., Zapciu, A., Amza, C., Baciu, F., & Marinescu, R. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.05.020 · Cited by 1,015
Wu, W., Geng, P., Li, G., Zhao, D., Zhang, H., & Zhao, J. (2015) · Materials · doi:10.3390/ma8095271 · Cited by 881
Machine learning in additive manufacturing: State-of-the-art and perspectives
Wang, C., Tan, X. P., Tor, S. B., & Lim, C. S. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101538 · Cited by 693
Metadata
- Authors
- Sood, A. K., Ohdar, R. K., & Mahapatra, S. S.
- Venue
- Journal of Advanced Research
- Publisher
- Elsevier BV
- Published
- 2012-01
- Volume
- 3
- Issue
- 1
- Pages
- 81-90
- ISSN
- 2090-1224 (ISSN-L)
- 2090-1232
- OpenAlex
- W2093500299
- Cited by
- 576
- References
- 21
- FWCI
- 5.90
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.