The DOI matches its Crossref record.
Parametric appraisal of fused deposition modelling process using the grey Taguchi method
Abstract
Dimensional accuracy of a fused deposition modelling (FDM) built part is greatly influenced by many process parameters. In this study, the effect of five process parameters such as layer thickness, part build orientation, raster angle, air gap, and raster width along with their interactions has been studied using Taguchi's L 27 orthogonal array. Experimental results indicate that the measured dimension is always more than the desired value along the thickness direction but the length, width, and diameter of hole of test part are less than the desired value. It has been observed that optimal factor settings for each performance characteristic such as percentage change in length, width, thickness, and diameter are different. In order to minimize four responses simultaneously, the grey-Taguchi method is adopted and optimum factor levels have been reported. Finally, overall dimensional accuracy is predicted using artificial neural network (ANN).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review on machine learning in 3D printing: applications, potential, and challenges
Goh, G. D., Sing, S. L., & Yeong, W. Y. (2021) · Artificial Intelligence Review · doi:10.1007/s10462-020-09876-9 · Cited by 652
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2012) · Journal of Advanced Research · doi:10.1016/j.jare.2011.05.001 · Cited by 576
Self-citationQi, X., Chen, G., Li, Y., Cheng, X., & Li, C. (2019) · Engineering · doi:10.1016/j.eng.2019.04.012 · Cited by 529
Wang, P., Zou, B., Xiao, H., Ding, S., & Huang, C. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.03.016 · Cited by 458
Process–Structure–Properties in Polymer Additive Manufacturing via Material Extrusion: A Review
Goh, G. D., Yap, Y. L., Tan, H. K. J., Sing, S. L., Goh, G. L., & Yeong, W. Y. (2020) · Critical Reviews in Solid State and Materials Sciences · doi:10.1080/10408436.2018.1549977 · Cited by 429
Metadata
- Authors
- Sood, A. K., Ohdar, R. K., & Mahapatra, S. S.
- Venue
- Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Publisher
- SAGE Publications
- Published
- 2009-07-24
- Volume
- 224
- Issue
- 1
- Pages
- 135-145
- ISSN
- 0954-4054 (ISSN-L)
- 2041-2975
- OpenAlex
- W2016034459
- Cited by
- 163
- References
- 0
- FWCI
- 5.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Parametric appraisal of fused deposition modelling process using the grey Taguchi method. https://app.cochat.ai/papers/10.1243/09544054jem1565
- The paper
- Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010). Parametric appraisal of fused deposition modelling process using the grey Taguchi method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. https://doi.org/10.1243/09544054jem1565
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.