The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
3D printing based on cardiac CT assists anatomic visualization prior to transcatheter aortic valve replacement
Open accessAbstract
Background 3D printing is a promising technique that may have applications in medicine, and there is expanding interest in the use of patient-specific 3D models to guide surgical interventions.Objective To determine the feasibility of using cardiac CT to print individual models of the aortic root complex for transcatheter aortic valve replacement (TAVR) planning as well as to determine the ability to predict paravalvular aortic regurgitation (PAR).Methods This retrospective study included 16 patients (9 with PAR identified on blinded interpretation of post-procedure trans-thoracic echocardiography and 7 age, sex, and valve size-matched controls with no PAR). 3D printed models of the aortic root were created from pre-TAVR cardiac computed tomography data. These models were fitted with printed valves and predictions regarding post-implant PAR were made using a light transmission test.Results Aortic root 3D models were highly accurate, with excellent agreement between annulus measurements made on 3D models and those made on corresponding 2D data (mean difference of -0.34 mm, 95% limits of agreement: ± 1.3 mm). The 3D printed valve models were within 0.1 mm of their designed dimensions. Examination of the fit of valves within patient-specific aortic root models correctly predicted PAR in 6 of 9 patients (6 true positive, 3 false negative) and absence of PAR in 5 of 7 patients (5 true negative, 2 false positive).Conclusions Pre-TAVR 3D-printing based on cardiac CT provides a unique patient-specific method to assess the physical interplay of the aortic root and implanted valves. With additional optimization, 3D models may complement traditional techniques used for predicting which patients are more likely to develop PAR.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Models that replicate the geometrically complex structure of the heart, harboring chambers and large vessels with soft biomaterials, can be achieved using 3D bioprinting.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [13]
Experimental — accuracy not yet measuredThe check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“The concept is gaining traction, as the ability to print tissues composed entirely of native proteins, cells and/or biocompatible synthetic components is possible and accessible to many laboratories9–17.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [13]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tymrak, B., Kreiger, M. A., & Pearce, J. M. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.02.038 · Cited by 1,259
Prioritizing spatial accuracy in high-resolution fMRI data using multivariate feature weight mapping
Stelzer, J., Buschmann, T., Lohmann, G., Margulies, D. S., Trampel, R., & Turner, R. (2014) · Frontiers in Neuroscience · doi:10.3389/fnins.2014.00066 · Cited by 636
Achenbach, S. S., Delgado, V., Hausleiter, J., Schoenhagen, P., Min, J. K., & Leipsic, J. A. (2012) · Journal of cardiovascular computed tomography · doi:10.1016/j.jcct.2012.11.002 · Cited by 630
Paravalvular Leak After Transcatheter Aortic Valve Replacement
Généreux, P., Head, S. J., Hahn, R., Daneault, B., Kodali, S., Williams, M. R., van Mieghem, N. M., Alu, M. C., Serruys, P. W., Kappetein, A. P., et al. (2013) · Journal of the American College of Cardiology · doi:10.1016/j.jacc.2012.08.1039 · Cited by 447
Assessment of Paravalvular Regurgitation Following TAVR
Pibarot, P., Hahn, R. T., Weissman, N. J., & Monaghan, M. J. (2015) · JACC: Cardiovascular Imaging · doi:10.1016/j.jcmg.2015.01.008 · Cited by 277
Van Belle, E., Juthier, F., Susen, S., Vincentelli, A., Iung, B., Dallongeville, J., Eltchaninoff, H., Laskar, M., Leprince, P., Lievre, M., et al. (2014) · Circulation · doi:10.1161/circulationaha.113.002677 · Cited by 241
Standardized Imaging for Aortic Annular Sizing
Kasel, A. M., Cassese, S., Bleiziffer, S., Amaki, M., Hahn, R. T., Kastrati, A., & Sengupta, P. P. (2013) · JACC. Cardiovascular imaging · doi:10.1016/j.jcmg.2012.12.005 · Cited by 240
Schmauß, D., Haeberle, S., Hagl, C. M., & Sodian, R. (2014) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezu310 · Cited by 212
Kim, M. S., Hansgen, A. R., Wink, O., Quaife, R. A., & Carroll, J. D. (2008) · Circulation · doi:10.1161/circulationaha.107.740977 · Cited by 189
Yang, T., Webb, J. G., Blanke, P., Dvir, D., Hansson, N. C., Nørgaard, B. L., Thompson, C., Thomas, M., Wendler, O., Vahanian, A. S., et al. (2015) · JACC: Cardiovascular Interventions · doi:10.1016/j.jcin.2014.10.014 · Cited by 133
Cited by
Sorted by citations
Designing Biomaterials for 3D Printing
Güvendiren, M., Molde, J., Soares, R. M. D., & Kohn, J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00121 · Cited by 761
Li, Y., Feng, Z., Hao, L., Huang, L., Xin, C., Wang, Y., Bilotti, E., Essa, K., Zhang, H., Li, Z., et al. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201900981 · Cited by 621
Applications of 3D printing in cardiovascular diseases
Giannopoulos, A. A., Mitsouras, D., Yoo, S., Liu, P. P., Chatzizisis, Y. S., & Rybicki, F. J. (2016) · Nature Reviews Cardiology · doi:10.1038/nrcardio.2016.170 · Cited by 423
Self-citationThe role of additive manufacturing for biomedical applications: A critical review
Kumar, R., Kumar, M., & Chohan, J. S. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.02.022 · Cited by 383
Garcia, J., Yang, Z., Mongrain, R., Leask, R. L., & Lachapelle, K. J. (2017) · BMJ Simulation & Technology Enhanced Learning · doi:10.1136/bmjstel-2017-000234 · Cited by 348
Kupfer, M. E., Lin, W.-H., Ravikumar, V., Qiu, K., Wang, L., Gao, L., Bhuiyan, D. B., Lenz, M., Ai, J., Mahutga, R. R., et al. (2020) · Circulation Research · doi:10.1161/circresaha.119.316155 · Cited by 329
Measuring and Establishing the Accuracy and Reproducibility of 3D Printed Medical Models
George, E., Liacouras, P. C., Rybicki, F. J., & Mitsouras, D. (2017) · Radiographics · doi:10.1148/rg.2017160165 · Cited by 284
Self-citationSex-Based Differences in Outcomes With Transcatheter Aortic Valve Therapy
Chandrasekhar, J., Dangas, G., Yu, J., Vemulapalli, S., Suchindran, S., Vora, A. N., Baber, U., & Mehran, R. (2016) · Journal of the American College of Cardiology · doi:10.1016/j.jacc.2016.10.041 · Cited by 232
Current Developments in 3D Bioprinting for Tissue and Organ Regeneration–A Review
Agarwal, S., Saha, S., Balla, V. K., Pal, A., Barui, A., & Bodhak, S. (2020) · Frontiers in Mechanical Engineering · doi:10.3389/fmech.2020.589171 · Cited by 227
4D printing applications in medical field: A brief review
Javaid, M., & Haleem, A. (2018) · Clinical Epidemiology and Global Health · doi:10.1016/j.cegh.2018.09.007 · Cited by 215
Meyer-Szary, J., Luis, M. S., Mikulski, S., Patel, A., Schulz, F., Tretiakow, D., Fercho, J. M., Jaguszewska, K., Frankiewicz, M., Pawłowska, E., et al. (2022) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph19063331 · Cited by 210
Biodegradable Polymers for Biomedical Additive Manufacturing
Puppi, D., & Chiellini, E. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100700 · Cited by 197
Additive manufacturing: recent trends, applications and future outlooks
Srivastava, M., & Rathee, S. (2021) · Progress in Additive Manufacturing · doi:10.1007/s40964-021-00229-8 · Cited by 180
Cardiothoracic Applications of 3-dimensional Printing
Giannopoulos, A. A., Steigner, M. L., George, E., Barile, M., Hunsaker, A. R., Rybicki, F. J., & Mitsouras, D. (2016) · Journal of Thoracic Imaging · doi:10.1097/rti.0000000000000217 · Cited by 164
Self-citation3D Bioprinting of cardiac tissue and cardiac stem cell therapy
Alonzo, M., Kumar, S. A., Roman, B. B., Tasnim, N., & Joddar, B. (2019) · Translational research · doi:10.1016/j.trsl.2019.04.004 · Cited by 170
3D Printing, Computational Modeling, and Artificial Intelligence for Structural Heart Disease
Wang, D. D., Qian, Z. Y., Vukicevic, M., Engelhardt, S., Kheradvar, A., Zhang, C., Little, S. H., Verjans, J. W. H., Comaniciu, D., O’Neill, W. W., et al. (2020) · JACC. Cardiovascular imaging · doi:10.1016/j.jcmg.2019.12.022 · Cited by 151
Three‐dimensional printing in congenital heart disease: A systematic review
Lau, I., & Sun, Z. (2018) · Journal of Medical Radiation Sciences · doi:10.1002/jmrs.268 · Cited by 148
3D printed renal cancer models derived from MRI data: application in pre-surgical planning
Wake, N., Rude, T., Kang, S. K., STIFELMAN, M. D., Borin, J. F., Sodickson, D. K., Huang, W. C. W., & Chandarana, H. (2017) · Abdominal Radiology · doi:10.1007/s00261-016-1022-2 · Cited by 128
Qian, Z. Y., Wang, K., Liu, S., Zhou, X., Rajagopal, V., Meduri, C., Kauten, J. R., Chang, Y.-H., Wu, C., Zhang, C., et al. (2017) · JACC. Cardiovascular imaging · doi:10.1016/j.jcmg.2017.04.005 · Cited by 126
Clinical Trial Principles and Endpoint Definitions for Paravalvular Leaks in Surgical Prosthesis
Ruiz, C. E., Hahn, R. T., Berrebi, A., BORER, J. S., Cutlip, D. E., Fontana, G., Gerosa, G., Ibrahim, R., Jelnin, V., Jilaihawi, H., et al. (2017) · Journal of the American College of Cardiology · doi:10.1016/j.jacc.2017.02.038 · Cited by 124
Role of CT and MRI in the design and development of orthopaedic model using additive manufacturing
Haleem, A., & Javaid, M. (2018) · Journal of Clinical Orthopaedics and Trauma · doi:10.1016/j.jcot.2018.07.002 · Cited by 117
3D Printing is a Transformative Technology in Congenital Heart Disease
Anwar, S., Singh, G. K., Miller, J. R., Sharma, M., Manning, P. B., Billadello, J. J., Eghtesady, P., & Woodard, P. K. (2018) · JACC Basic to Translational Science · doi:10.1016/j.jacbts.2017.10.003 · Cited by 120
Anatomic modeling using 3D printing: quality assurance and optimization
Leng, S., McGee, K. P., Morris, J. M., Alexander, A. E., Kuhlmann, J. L., Vrieze, T. J., McCollough, C. H., & Matsumoto, J. M. S. (2017) · 3D Printing in Medicine · doi:10.1186/s41205-017-0014-3 · Cited by 112
Huang, C., Lan, Y., Chen, S., Liu, Q., Luo, X., Xu, G., Zhou, W. J., Lin, F., Peng, Y., Ng, E. Y. K., et al. (2019) · Complexity · doi:10.1155/2019/5712594 · Cited by 103
Role of virtual reality in congenital heart disease
Ong, C. S., Krishnan, A., Huang, C., Spevak, P. J., Vricella, L. A., Hibino, N., Garcia, J. R., & Gaur, L. (2018) · Congenital Heart Disease · doi:10.1111/chd.12587 · Cited by 98
3D printing in tissue engineering: a state of the art review of technologies and biomaterials
Poomathi, N., Singh, S., Prakash, C., Subramanian, A., Sahay, R., Chinnappan, A., & Ramakrishna, S. (2020) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2018-0217 · Cited by 98
Medical three-dimensional printing opens up new opportunities in cardiology and cardiac surgery
Bartel, T., Rivard, A. L., Jiménez, A., Mestres, C. A., & Müller, S. (2017) · European Heart Journal · doi:10.1093/eurheartj/ehx016 · Cited by 96
The Future of Cardiovascular Computed Tomography
Nicol, E. D., Nørgaard, B. L., Blanke, P., Ahmadi, A. A., Weir-McCall, J. R., Maurovich‐Horvat, P., Han, K., Bax, J. J., & Leipsic, J. A. (2019) · JACC. Cardiovascular imaging · doi:10.1016/j.jcmg.2018.11.037 · Cited by 91
Principles of TAVR valve design, modelling, and testing
Rotman, O. M., Bianchi, M., Ghosh, R. P., Kovarovic, B. J., & Bluestein, D. (2018) · Expert Review of Medical Devices · doi:10.1080/17434440.2018.1536427 · Cited by 90
Applications of 3D printing in the management of severe spinal conditions
Provaggi, E., Leong, J., & Kalaskar, D. M. (2016) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/0954411916667761 · Cited by 87
Valverde, I. (2016) · Revista Española de Cardiología · doi:10.1016/j.recesp.2016.09.043 · Cited by 86
From Microscale Devices to 3D Printing
Borovjagin, A. V., Ogle, B. M., Berry, J. L., & Zhang, J. J. (2017) · Circulation Research · doi:10.1161/circresaha.116.308538 · Cited by 83
Valverde, I. (2017) · Revista Española de Cardiología (English Edition) · doi:10.1016/j.rec.2017.01.012 · Cited by 83
Modelling of aortic aneurysm and aortic dissection through 3D printing
Ho, D., Squelch, A. P., & Sun, Z. (2017) · Journal of Medical Radiation Sciences · doi:10.1002/jmrs.212 · Cited by 82
3D printing from MRI Data: Harnessing strengths and minimizing weaknesses
Ripley, B. A., Levin, D. B., Kelil, T., Hermsen, J. L., Kim, S., Maki, J. H., & Wilson, G. J. (2016) · Journal of Magnetic Resonance Imaging · doi:10.1002/jmri.25526 · Cited by 78
Self-citationFabrication of arbitrary 3D components in cardiac surgery: from macro-, micro- to nanoscale
Kankala, R. K., Zhu, K., Li, ., Wang, C., Wang, S., & Chen, A. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8113 · Cited by 77
3D printing in adult cardiovascular surgery and interventions: a systematic review
Wang, C., Zhang, L., Qin, T., Xi, Z., Sun, L., Wu, H., & Li, D. (2020) · Journal of Thoracic Disease · doi:10.21037/jtd-20-455 · Cited by 77
Pre-procedural fit-testing of TAVR valves using parametric modeling and 3D printing
Hosny, A., Dilley, J. D., Kelil, T., Mathur, M., Dean, M. N., Weaver, J. C., & Ripley, B. A. (2018) · Journal of cardiovascular computed tomography · doi:10.1016/j.jcct.2018.09.007 · Cited by 76
Self-citationApplication of 3D Printing in Preoperative Planning
Segaran, N. L., Saini, G., Mayer, J. L., Naidu, S., Patel, I. J., Alzubaidi, S. J., & Öklü, R. (2021) · Journal of Clinical Medicine · doi:10.3390/jcm10050917 · Cited by 76
Sun, Z. (2020) · Biomolecules · doi:10.3390/biom10111577 · Cited by 79
3D printed tissue and organ using additive manufacturing: An overview
Javaid, M., & Haleem, A. (2019) · Clinical Epidemiology and Global Health · doi:10.1016/j.cegh.2019.12.008 · Cited by 77
Patient-Specific 3D-Printed Low-Cost Models in Medical Education and Clinical Practice
Sun, Z., Wong, Y. H., & Yeong, C. H. (2023) · Micromachines · doi:10.3390/mi14020464 · Cited by 74
Structural and congenital heart disease interventions: the role of three-dimensional printing
Meier, L., Meineri, M., Hiansen, J. Q., & Horlick, E. M. (2017) · Netherlands Heart Journal · doi:10.1007/s12471-016-0942-3 · Cited by 72
Murphy, D. J., Ge, Y., Don, C. W., Keraliya, A. R., Aghayev, A., Morgan, R. B., Galper, B. Z., Bhatt, D. L., Kaneko, T., Carli, M. F. D., et al. (2017) · Journal of the American Heart Association · doi:10.1161/jaha.117.007353 · Cited by 70
Self-citation3D printing from cardiovascular CT: a practical guide and review
Otton, J. M., Birbara, N. S., Hussain, T., Greil, G. F., Foley, T. A., & Pather, N. (2017) · Cardiovascular Diagnosis and Therapy · doi:10.21037/cdt.2017.01.12 · Cited by 70
Hell, M. M., Achenbach, S. S., Yoo, I., Franke, J., Blachutzik, F., Roether, J., Graf, V., Raaz‐Schrauder, D., Marwan, M., & Schlundt, C. (2017) · EuroIntervention · doi:10.4244/eij-d-17-00359 · Cited by 70
Haghiashtiani, G., Qiu, K., Sanchez, J. D. Z., Fuenning, Z. J., Nair, P., Ahlberg, S. E., Iaizzo, P. A., & McAlpine, M. C. (2020) · Science Advances · doi:10.1126/sciadv.abb4641 · Cited by 68
Additive manufacturing applications in cardiology: A review
Haleem, A., Javaid, M., & Saxena, A. (2018) · The Egyptian Heart Journal · doi:10.1016/j.ehj.2018.09.008 · Cited by 66
The Future of Cardiovascular Imaging
Carli, M. F. D., Geva, T., & Davidoff, R. (2016) · Circulation · doi:10.1161/circulationaha.116.023511 · Cited by 59
A systematic review of 3-D printing in cardiovascular and cerebrovascular diseases
Sun, Z. (2017) · The Anatolian Journal of Cardiology · doi:10.14744/anatoljcardiol.2017.7464 · Cited by 60
Investigating accuracy of 3D printed liver models with computed tomography
Witowski, J. S., Wake, N., Grochowska, A., Sun, Z., Budzynski, A. Z., Major, P., Popiela, T. J., & Pędziwiatr, M. (2019) · Quantitative Imaging in Medicine and Surgery · doi:10.21037/qims.2018.09.16 · Cited by 57
Establishing 3D Printing at the Point of Care: Basic Principles and Tools for Success
Bastawrous, S., Wu, L., Liacouras, P. C., Levin, D. B., Ahmed, M. T., Strzelecki, B., Amendola, M. F., Lee, J. T., Coburn, J., & Ripley, B. A. (2022) · Radiographics · doi:10.1148/rg.210113 · Cited by 56
Self-citationLogistics of Three-dimensional Printing
Hodgdon, T., Danrad, R., Patel, M. J., Smith, S. E., Richardson, M. L., Ballard, D. H., Ali, S., Trace, A. P., DeBenedectis, C. M., Zygmont, M. E., et al. (2017) · Academic Radiology · doi:10.1016/j.acra.2017.08.003 · Cited by 56
3D printing surgical phantoms and their role in the visualization of medical procedures
Higgins, M., Leung, S. K., & Radacsi, N. (2022) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2022.100057 · Cited by 54
3D Modelling and Printing Technology to Produce Patient-Specific 3D Models
Birbara, N. S., Otton, J. M., & Pather, N. (2017) · Heart Lung and Circulation · doi:10.1016/j.hlc.2017.10.017 · Cited by 53
The Various Applications of 3D Printing in Cardiovascular Diseases
Sabbagh, A. E., Eleid, M. F., Al-Hijji, M. A., Anavekar, N. S., Holmes, D. R., Nkomo, V. T., Oderich, G. S., Cassivi, S. D., Said, S. M., Rihal, C. S., et al. (2018) · Current Cardiology Reports · doi:10.1007/s11886-018-0992-9 · Cited by 53
Polysaccharide‐based biomaterials in a journey from 3D to 4D printing
Shokrani, H., Shokrani, A., Seidi, F., Mashayekhi, M., Kar, S., Nedeljković, D., Kuang, T., Saeb, M. R., & Mozafari, M. (2023) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10503 · Cited by 52
3D printing for heart valve disease: a systematic review
Tuncay, V., & van Ooijen, P. M. A. (2019) · European Radiology Experimental · doi:10.1186/s41747-018-0083-0 · Cited by 50
Wang, J.-L., Yuan, Z.-G., Qian, G.-L., Bao, W., & Jin, G. (2018) · Medicine · doi:10.1097/md.0000000000011103 · Cited by 49
3D Printing for Cardiovascular Applications: From End-to-End Processes to Emerging Developments
Gharleghi, R., Dessalles, C. A., Lal, R., McCraith, S., Sarathy, K., Jepson, N. S., Otton, J. M., Barakat, A. I., & Beier, S. (2021) · Annals of Biomedical Engineering · doi:10.1007/s10439-021-02784-1 · Cited by 53
Clinical Trial Principles and Endpoint Definitions for Paravalvular Leaks in Surgical Prosthesis
Ruiz, C. E., Hahn, R. T., Berrebi, A., BORER, J. S., Cutlip, D. E., Fontana, G., Gerosa, G., Ibrahim, R., Jelnin, V., Jilaihawi, H., et al. (2017) · European Heart Journal · doi:10.1093/eurheartj/ehx211 · Cited by 49
Abolhassani, S., Fattahi, R., Safshekan, F., Saremi, J., & Hasanzadeh, E. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202403065 · Cited by 55
Sabbagh, A. E., Eleid, M. F., Matsumoto, J. M. S., Anavekar, N. S., Al-Hijji, M. A., Said, S. M., Nkomo, V. T., Holmes, D. R., Rihal, C. S., & Foley, T. A. (2018) · Catheterization and Cardiovascular Interventions · doi:10.1002/ccd.27488 · Cited by 47
Farooqi, K. M., Cooper, C., Chelliah, A., Saeed, O., Chai, P. J., Jambawalikar, S., Lipson, H., BACHA, E. A., Einstein, A. J., & Jorde, U. P. (2018) · JACC Heart Failure · doi:10.1016/j.jchf.2018.09.011 · Cited by 47
Advances in bioprinting using additive manufacturing
Singh, M., & Jonnalagadda, S. (2019) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2019.105167 · Cited by 45
3D Printed Models in Cardiovascular Disease: An Exciting Future to Deliver Personalized Medicine
Sun, Z., & Wee, C. (2022) · Micromachines · doi:10.3390/mi13101575 · Cited by 44
Three-Dimensional Printing Applications in Percutaneous Structural Heart Interventions
Harb, S. C., Rodriguez, L. L., Vukicevic, M., Kapadia, S. R., & Little, S. H. (2019) · Circulation Cardiovascular Imaging · doi:10.1161/circimaging.119.009014 · Cited by 44
Methods for verification of 3D printed anatomic model accuracy using cardiac models as an example
Odeh, M., Levin, D. B., Inziello, J., Fenoglietto, F. L., Mathur, M., Hermsen, J. L., Stubbs, J. B., & Ripley, B. A. (2019) · 3D Printing in Medicine · doi:10.1186/s41205-019-0043-1 · Cited by 43
Self-citationOoms, J. F., Wang, D. D., Rajani, R., Redwood, S. R., Little, S. H., Chuang, M. L., Popma, J. J., Dahle, G., Pfeiffer, M. P., Kanda, B., et al. (2021) · JACC. Cardiovascular imaging · doi:10.1016/j.jcmg.2020.12.034 · Cited by 40
Three-dimensional printing in cardiology: Current applications and future challenges
Luo, H., Meyer-Szary, J., Wang, Z., Sabiniewicz, R., & Liu, Y. (2017) · Cardiology Journal · doi:10.5603/cj.a2017.0056 · Cited by 39
3D Printing Applications for Transcatheter Aortic Valve Replacement
Levin, D. B., Mackensen, G. B., Reisman, M., McCabe, J. M., Dvir, D., & Ripley, B. A. (2020) · Current Cardiology Reports · doi:10.1007/s11886-020-1276-8 · Cited by 38
Self-citationThree-dimensional printing for heart diseases: clinical application review
Ma, Y., Ding, P., Li, L., Liu, Y., Jin, P., Tang, J., & Yang, J. Z. (2021) · Bio-Design and Manufacturing · doi:10.1007/s42242-021-00125-8 · Cited by 38
Talanki, V. R., Peng, Q., Shamir, S. B., Baete, S. H., Duong, T. Q., & Wake, N. (2021) · Journal of Magnetic Resonance Imaging · doi:10.1002/jmri.27744 · Cited by 38
3D Printing in Medicine: Bridging Imaging, Education, and Practice
Anagnostopoulos, S., Baltayiannis, N., Koletsis, N. E., Mulita, F., Spanou, F., Leivaditis, V., Katsakiori, P. F., Mitsos, S., Tomos, P. I., & Koletsis, E. N. (2025) · Archives of Medical Science - Atherosclerotic Diseases · doi:10.5114/amsad/209721 · Cited by 37
3D printing tissue-mimicking materials for realistic transseptal puncture models
Bezek, L. B., Cauchi, M. P., Vita, R. D., Foerst, J. R., & Williams, C. B. (2020) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2020.103971 · Cited by 37
Patient-Specific 3D-Printed Models in Pediatric Congenital Heart Disease
Sun, Z. (2023) · Children · doi:10.3390/children10020319 · Cited by 36
Recent advances in cardiac catheterization for congenital heart disease
Kang, S., & Benson, L. N. (2018) · F1000Research · doi:10.12688/f1000research.13021.1 · Cited by 35
Quest for cardiovascular interventions: precise modeling and 3D printing of heart valves
Vashistha, R., Kumar, P., Dangi, A. K., Sharma, N., Chhabra, D., & Shukla, P. (2019) · Journal of Biological Engineering · doi:10.1186/s13036-018-0132-5 · Cited by 36
Translating Imaging Into 3D Printed Cardiovascular Phantoms
Illi, J., Bernhard, B., Nguyen, C. T., Pilgrim, T., Praz, F., Gloeckler, M., Windecker, S., Haeberlin, A., & Gräni, C. (2022) · JACC Basic to Translational Science · doi:10.1016/j.jacbts.2022.01.002 · Cited by 34
Faletti, R., Gatti, M., Cosentino, A., Bergamasco, L., Stura, E. C., Garabello, D., Pennisi, G., Salizzoni, S., Veglia, S., Davini, O., et al. (2018) · Journal of cardiovascular computed tomography · doi:10.1016/j.jcct.2018.05.016 · Cited by 34
Bernhard, B., Illi, J., Gloeckler, M., Pilgrim, T., Praz, F., Windecker, S., Haeberlin, A., & Gräni, C. (2022) · Heart Lung and Circulation · doi:10.1016/j.hlc.2022.04.052 · Cited by 33
Living the heart in three dimensions: applications of 3D printing in CHD
Forte, M. N. V., Hussain, T., Roest, A. A. W., Gomez-Ciriza, G., Jongbloed, M. R. M., Simpson, J. M., Pushparajah, K., Byrne, N., & Valverde, I. (2019) · Cardiology in the Young · doi:10.1017/s1047951119000398 · Cited by 32
Three-dimensional printing in structural heart disease and intervention
Fan, Y., Wong, R. H. L., & Lee, A. P. (2019) · Annals of Translational Medicine · doi:10.21037/atm.2019.09.73 · Cited by 32
Liu, Q., Jain, T., Peng, C., Peng, F., Narayanan, A., & Joy, A. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b02558 · Cited by 33
Tanaka, Y., Saito, S., Sasuga, S., Takahashi, A., Aoyama, Y., Obama, K., Umezu, M., & Iwasaki, K. (2018) · International Journal of Cardiology · doi:10.1016/j.ijcard.2017.11.106 · Cited by 32
Three-Dimensional Bioprinting in Cardiovascular Disease: Current Status and Future Directions
Sun, Z.-H., Zhao, J., Leung, E., Flandes-Iparraguirre, M., Vernon, M. J., Silberstein, J., De-Juan-Pardo, E., & Jansen, S. (2023) · Biomolecules · doi:10.3390/biom13081180 · Cited by 20
Medical applications of stereolithography: An overview
Stawicki, S. P., Kaza, A., Rembalsky, J., Roma, N., Yellapu, V., & Delong, W. (2018) · International Journal of Academic Medicine · doi:10.4103/ijam.ijam_54_18 · Cited by 30
Cardiovascular Three-Dimensional Printing in Non-Congenital Percutaneous Interventions
Santos, M. O., dos Santos, E. O., Gonçalves, L. M. M., & Marques, J. S. (2019) · Heart Lung and Circulation · doi:10.1016/j.hlc.2019.04.020 · Cited by 29
Schmit, C. H., Matsumoto, J. M. S., Yost, K. J., Alexander, A. E., Ness, L., Kurup, A. N., Atwell, T. D., Leibovich, B. C., & Schmit, G. D. (2018) · Abdominal Radiology · doi:10.1007/s00261-018-1710-1 · Cited by 26
Ferrari, E., Gallo, M., Wang, C., Zhang, L., Taramasso, M., Maisano, F., Pirelli, L., Berdajs, D. A., & von Segesser, L. K. (2019) · Interactive Cardiovascular and Thoracic Surgery · doi:10.1093/icvts/ivz250 · Cited by 26
3D printing in pharmaceuticals: An emerging technology full of challenges
Wadher, K., Trivedi, R., Wankhede, N. L., Kale, M. B., & Umekar, M. J. (2020) · Annales Pharmaceutiques Françaises · doi:10.1016/j.pharma.2020.08.007 · Cited by 25
Preliminary Research on Mechanical Properties of 3D Printed Rock Structures
Tian, W., & Han, N. (2017) · Geotechnical Testing Journal · doi:10.1520/gtj20160177 · Cited by 25
Patient-specific 3D Valve Modeling for Structural Intervention
Vukicevic, M., Vekilov, D. P., Grande-Allen, K. J., & Little, S. H. (2017) · Structural Heart · doi:10.1080/24748706.2017.1377363 · Cited by 25
Printing@Clinic: From Medical Models to Organ Implants
Zhao, H., Yang, F., Fu, J., Gao, Q., Liu, A., Sun, M., & He, Y. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00542 · Cited by 25
Soft robotics for physical simulators, artificial organs and implantable assistive devices
Zrinscak, D., Lorenzon, L., Maselli, M., & Cianchetti, M. (2023) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/acb57a · Cited by 23
Revolutionizing healthcare: Emerging frontiers in 3D bioprinting of tissues and organs
Ochieng, B. O., Arroyan, Y. N., Onyango, B., Kong, L., Wang, G., & Ye, Z. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.113210 · Cited by 22
Mallet Finger Lattice Casts Using 3D Printing
Choi, H.-W., Seo, A., & Lee, J. (2019) · Journal of Healthcare Engineering · doi:10.1155/2019/4765043 · Cited by 23
Shinbane, J. S., & Saxon, L. A. (2017) · Journal of cardiovascular computed tomography · doi:10.1016/j.jcct.2017.11.004 · Cited by 23
Song, H., Zhou, Q., Zhang, L., Deng, Q., Wang, Y., Hu, B., Tan, T., Chen, J., Pan, Y., & He, F. (2017) · Medicine · doi:10.1097/md.0000000000007865 · Cited by 19
Ali, A., Ballard, D. H., Althobaity, W., Christensen, A. M., Geritano, M., Ho, M., Liacouras, P. C., Matsumoto, J. M. S., Morris, J. M., Ryan, J. R., et al. (2020) · 3D Printing in Medicine · doi:10.1186/s41205-020-00078-1 · Cited by 19
Self-citation
Metadata
- Authors
- Ripley, B., Kelil, T., Cheezum, M. K., Goncalves, A., Di Carli, M. F., Rybicki, F. J., Steigner, M., Mitsouras, D., & Blankstein, R.
- Affiliations
- Brigham and Women's Hospital (US)
- University of Ottawa (CA)
- Corresponding author
- Blankstein, Ron
- Venue
- Journal of Cardiovascular Computed Tomography
- Publisher
- Elsevier BV
- Published
- 2016-01
- Volume
- 10
- Issue
- 1
- Pages
- 28-36
- ISSN
- 1876-861X (ISSN-L)
- 1934-5925
- PMC
- PMC5573584
- OpenAlex
- W2213274111
- Cited by
- 205
- References
- 28
- Citations by year
- 2026: 3 · 2025: 10 · 2024: 12 · 2023: 15 · 2022: 17 · 2021: 18 · 2020: 31 · 2019: 23 · 2018: 29 · 2017: 36 · 2016: 11
- FWCI
- 18.44
- Type
- journal article
- Language
- en
- Open access
- green
- www.ncbi.nlm.nih.gov
- Locations
- Journal of cardiovascular computed tomography (publishedVersion)
- PubMed (publishedVersion)
- Europe PMC (PubMed Central) (acceptedVersion)
- PubMed Central (acceptedVersion)
- eScholarship (California Digital Library) (submittedVersion)
- Funders
- National Institute of Biomedical Imaging and Bioengineering (K01EB015868)
- Topics
- Health Sciences › Medicine › Cardiology and Cardiovascular Medicine › Cardiac Valve Diseases and Treatments
- Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
- Health Sciences › Medicine › Cardiology and Cardiovascular Medicine › Aortic Disease and Treatment Approaches
- Keywords
- 3D printing, transcatheter aortic valve implantation, paravalvular aortic regurgitation, aortic root, patient-specific 3D models, cardiac CT, surgical planning, valve sizing, aortic annulus measurement
- MeSH terms
- Aged, Aged, 80 and over, Aortic Valve, Aortic Valve Insufficiency, Aortography, Computer Simulation, Female, Heart Valve Prosthesis, Humans, Male, Models, Anatomic, Models, Cardiovascular, Prosthesis Design, Tomography, X-Ray Computed, User-Computer Interface, Treatment Outcome, Prosthesis Fitting, Equipment Failure Analysis, Imaging, Three-Dimensional, Transcatheter Aortic Valve Replacement, Patient-Specific Modeling, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
