The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
3D printing based on cardiac CT assists anatomic visualization prior to transcatheter aortic valve replacement
Open accessAbstract
Background 3D printing is a promising technique that may have applications in medicine, and there is expanding interest in the use of patient-specific 3D models to guide surgical interventions.Objective To determine the feasibility of using cardiac CT to print individual models of the aortic root complex for transcatheter aortic valve replacement (TAVR) planning as well as to determine the ability to predict paravalvular aortic regurgitation (PAR).Methods This retrospective study included 16 patients (9 with PAR identified on blinded interpretation of post-procedure trans-thoracic echocardiography and 7 age, sex, and valve size-matched controls with no PAR). 3D printed models of the aortic root were created from pre-TAVR cardiac computed tomography data. These models were fitted with printed valves and predictions regarding post-implant PAR were made using a light transmission test.Results Aortic root 3D models were highly accurate, with excellent agreement between annulus measurements made on 3D models and those made on corresponding 2D data (mean difference of -0.34 mm, 95% limits of agreement: ± 1.3 mm). The 3D printed valve models were within 0.1 mm of their designed dimensions. Examination of the fit of valves within patient-specific aortic root models correctly predicted PAR in 6 of 9 patients (6 true positive, 3 false negative) and absence of PAR in 5 of 7 patients (5 true negative, 2 false positive).Conclusions Pre-TAVR 3D-printing based on cardiac CT provides a unique patient-specific method to assess the physical interplay of the aortic root and implanted valves. With additional optimization, 3D models may complement traditional techniques used for predicting which patients are more likely to develop PAR.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Models that replicate the geometrically complex structure of the heart, harboring chambers and large vessels with soft biomaterials, can be achieved using 3D bioprinting.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [13]
Experimental — accuracy not yet measuredThe check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“The concept is gaining traction, as the ability to print tissues composed entirely of native proteins, cells and/or biocompatible synthetic components is possible and accessible to many laboratories9–17.”
From In situ expansion, differentiation, and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid (2020) · cites this paper as [13]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tymrak, B., Kreiger, M. A., & Pearce, J. M. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.02.038 · Cited by 1,259
Prioritizing spatial accuracy in high-resolution fMRI data using multivariate feature weight mapping
Stelzer, J., Buschmann, T., Lohmann, G., Margulies, D. S., Trampel, R., & Turner, R. (2014) · Frontiers in Neuroscience · doi:10.3389/fnins.2014.00066 · Cited by 636
Achenbach, S. S., Delgado, V., Hausleiter, J., Schoenhagen, P., Min, J. K., & Leipsic, J. A. (2012) · Journal of cardiovascular computed tomography · doi:10.1016/j.jcct.2012.11.002 · Cited by 630
Paravalvular Leak After Transcatheter Aortic Valve Replacement
Généreux, P., Head, S. J., Hahn, R., Daneault, B., Kodali, S., Williams, M. R., van Mieghem, N. M., Alu, M. C., Serruys, P. W., Kappetein, A. P., et al. (2013) · Journal of the American College of Cardiology · doi:10.1016/j.jacc.2012.08.1039 · Cited by 447
Assessment of Paravalvular Regurgitation Following TAVR
Pibarot, P., Hahn, R. T., Weissman, N. J., & Monaghan, M. J. (2015) · JACC: Cardiovascular Imaging · doi:10.1016/j.jcmg.2015.01.008 · Cited by 277
Van Belle, E., Juthier, F., Susen, S., Vincentelli, A., Iung, B., Dallongeville, J., Eltchaninoff, H., Laskar, M., Leprince, P., Lievre, M., et al. (2014) · Circulation · doi:10.1161/circulationaha.113.002677 · Cited by 241
Standardized Imaging for Aortic Annular Sizing
Kasel, A. M., Cassese, S., Bleiziffer, S., Amaki, M., Hahn, R. T., Kastrati, A., & Sengupta, P. P. (2013) · JACC. Cardiovascular imaging · doi:10.1016/j.jcmg.2012.12.005 · Cited by 240
Schmauß, D., Haeberle, S., Hagl, C. M., & Sodian, R. (2014) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezu310 · Cited by 212
Kim, M. S., Hansgen, A. R., Wink, O., Quaife, R. A., & Carroll, J. D. (2008) · Circulation · doi:10.1161/circulationaha.107.740977 · Cited by 189
Yang, T., Webb, J. G., Blanke, P., Dvir, D., Hansson, N. C., Nørgaard, B. L., Thompson, C., Thomas, M., Wendler, O., Vahanian, A. S., et al. (2015) · JACC: Cardiovascular Interventions · doi:10.1016/j.jcin.2014.10.014 · Cited by 133
Flagged first, then by citations
Cited by
Sorted by citations
Items 101–200 of 204
Marano, R., Pontone, G., Agricola, E., Alushi, B., Bartorelli, A. L., Cameli, M., Carrabba, N., Esposito, A., Faletti, R., Francone, M., et al. (2022) · La radiologia medica · doi:10.1007/s11547-021-01434-9 · Cited by 17
New Insights into Valve Hemodynamics
Marom, G., & Einav, S. (2020) · Rambam Maimonides Medical Journal · doi:10.5041/rmmj.10400 · Cited by 16
Impact of 3D Printouts in Optimizing Surgical Results for Complex Congenital Heart Disease
Han, F., Co‐Vu, J., López‐Colón, D., Forder, J. R., Bleiweis, M. S., Reyes, K. M., DeGroff, C. G., & Chandran, A. (2019) · World Journal for Pediatric and Congenital Heart Surgery · doi:10.1177/2150135119852316 · Cited by 16
3D modeling: a future of cardiovascular medicine
Garner, K. H., & Singla, D. K. (2018) · Canadian Journal of Physiology and Pharmacology · doi:10.1139/cjpp-2018-0472 · Cited by 15
Reiff, C., Sanchez, J. D. Z., Mattison, L. M., Iaizzo, P. A., García, S., Raveendran, G., & Gurevich, S. G. (2020) · Catheterization and Cardiovascular Interventions · doi:10.1002/ccd.28783 · Cited by 15
Ferrari, E., Piazza, G., Scoglio, M., Berdajs, D. A., Tozzi, P., Maisano, F., & von Segesser, L. K. (2018) · ASAIO Journal · doi:10.1097/mat.0000000000000903 · Cited by 15
Chen, J. R., Morris, J. M., Wentworth, A. J., Sears, V. A., Duit, A. M., Erie, E., McGee, K. P., & Leng, S. (2023) · Journal of medical imaging · doi:10.1117/1.jmi.10.2.026501 · Cited by 14
Sun, Z., Silberstein, J., & Vaccarezza, M. (2024) · Journal of Cardiovascular Development and Disease · doi:10.3390/jcdd11010022 · Cited by 14
3D Printing for Cardiovascular Surgery and Intervention: A Review Article
shabbak, A., Masoumkhani, F., Fallah, A., Amani‐Beni, R., Mohammadpour, H., Shahbazi, T., & Bakhshi, A. (2023) · Current Problems in Cardiology · doi:10.1016/j.cpcardiol.2023.102086 · Cited by 13
3D Printed Patient Specific Models from Medical Imaging - A General Workflow
Ravi, T., Ranganathan, R., Pugalendhi, A., & Arumugam, S. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.01.416 · Cited by 13
Thorburn, C., Abdel‐Razek, O., Fagan, S., Pearce, N. J., Furey, M., Harris, S. R., Bartellas, M., & Adams, C. A. (2020) · Journal of Cardiothoracic Surgery · doi:10.1186/s13019-020-01255-3 · Cited by 13
Xenofontos, P., Zamani, R., & Akrami, M. (2022) · BioMedical Engineering OnLine · doi:10.1186/s12938-022-01029-z · Cited by 13
Three-dimensional printing to plan intracardiac operations
Henn, M. C., & Mokadam, N. A. (2021) · JTCVS Techniques · doi:10.1016/j.xjtc.2021.02.050 · Cited by 12
Role of 3D printing in healthcare: A comprehensive review on treatment and training
Nizam, M., Purohit, R., & Taufik, M. (2025) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/09544119251321585 · Cited by 11
Chick, J. F. B., Reddy, S. N., Yu, A. C., Kelil, T., Srinivasa, R. N., Cooper, K., & Saad, W. E. A. (2017) · Annals of Vascular Surgery · doi:10.1016/j.avsg.2017.02.012 · Cited by 11
Self-citationImaging Adults With Congenital Heart Disease Part II
Sahu, A., & Slesnick, T. C. (2017) · Journal of Thoracic Imaging · doi:10.1097/rti.0000000000000274 · Cited by 10
3D-Printing: Applications in Cardiovascular Imaging
Foley, T. A., Sabbagh, A. E., Anavekar, N. S., Williamson, E. E., & Matsumoto, J. M. S. (2017) · Current Radiology Reports · doi:10.1007/s40134-017-0239-3 · Cited by 10
Garg, R., & Zahn, E. M. (2020) · Current Cardiology Reports · doi:10.1007/s11886-020-01354-6 · Cited by 10
Chen, P.-C., Lin, J., Chiang, C.-H., Chen, Y., Chen, J.-E., & Liu, W. (2020) · Polymers · doi:10.3390/polym12122901 · Cited by 10
Mendez, K. L., Kennedy, D. G., Wang, D. D., O'Neill, B. P., & Roche, E. T. (2022) · Journal of the Society for Cardiovascular Angiography & Interventions · doi:10.1016/j.jscai.2022.100405 · Cited by 10
Role of Imaging Data in Additive Manufacturing for Biomedical Applications
Singh, G., & Pandey, P. M. (2020) · Materials horizons · doi:10.1007/978-981-15-5424-7_4 · Cited by 9
Manufacturing Better Outcomes in Cardiovascular Intervention: 3D Printing in Clinical Practice Today
Shin, J., & Truong, Q. A. (2018) · Current Treatment Options in Cardiovascular Medicine · doi:10.1007/s11936-018-0692-1 · Cited by 9
Wang, H., Song, H., Yang, Y., Wu, Z., Hu, R., Chen, J., Guo, J., Wang, Y., Jia, D. T., Cao, S., et al. (2021) · International Journal of Cardiology · doi:10.1016/j.ijcard.2021.01.029 · Cited by 9
3D Bioprinted Cardiac Tissues and Devices for Tissue Maturation
Sedláková, V., McTiernan, C. D., Cortes, D., Suuronen, E. J., & Alarcon, E. I. (2021) · Cells Tissues Organs · doi:10.1159/000512792 · Cited by 9
Transcatheter Aortic Valve Implantation in Younger Patients: A New Challenge
Virgili, G., Romano, S. M., Valenti, R., Migliorini, A., Stefàno, P., Marchionni, N., & Carrabba, N. (2021) · Medicina · doi:10.3390/medicina57090883 · Cited by 11
González-Urquijo, M., Hosseinzadeh, E., Aguirre‐Soto, A., & Fabiani, M. A. (2023) · Vascular and Endovascular Surgery · doi:10.1177/15385744231215560 · Cited by 9
3D Printing—A Cutting Edge Technology for Treating Post-Infarction Patients
Cernica, D., Benedek, I., Polexa, S., Ţolescu, C., & Benedek, T. (2021) · Life · doi:10.3390/life11090910 · Cited by 10
Kanschik, D., Haschemi, J., Heidari, H., Klein, K., Afzal, S., Maier, O., Piayda, K., Binneboessel, S., Özaslan, G., Bruno, R. R., et al. (2024) · Journal of the American Heart Association · doi:10.1161/jaha.123.034086 · Cited by 7
MICHIELS, C., Jambon, E., Sarrazin, J., de Hauteclocque, A. B., Ricard, S., Grenier, N., Faessel, M., Bos, F., & Bernhard, J. (2021) · The French Journal of Urology · doi:10.1016/j.purol.2021.04.002 · Cited by 7
Burris, N. S., Hoff, B. A., & Ross, B. D. (2018) · Annals of Translational Medicine · doi:10.21037/atm.2018.12.16 · Cited by 7
Polymeric hydrogels for bioprinting: A comprehensive review
Qureshi, M. A., Basree, Aziz, R., Azim, Y., & Ahmad, M. (2025) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2025.100198 · Cited by 6
Androshchuk, V., Montarello, N., Lahoti, N., Hill, S. J., Zhou, C., Patterson, T., Redwood, S. R., Niederer, S., Lamata, P., de Vecchi, A., et al. (2024) · The International Journal of Cardiovascular Imaging · doi:10.1007/s10554-024-03247-z · Cited by 6
The role of CT in planning percutaneous structural heart interventions: Where to measure and why
Revels, J. W., Wang, S. S., Gharai, L. R., Febbo, J., Fadl, S., & Bastawrous, S. (2021) · Clinical Imaging · doi:10.1016/j.clinimag.2021.04.029 · Cited by 6
Markovic, L. E., Nguyen, S., & Clouser, S. A. (2023) · Education in the Health Professions · doi:10.4103/ehp.ehp_28_22 · Cited by 6
Alamir, M. A., Nazir, S., Alani, A., Golub, I. S., Gilchrist, I. C., Aslam, F., Dhawan, P., Changal, K., Ostra, C., Soni, R., et al. (2020) · Expert Review of Cardiovascular Therapy · doi:10.1080/14779072.2020.1837624 · Cited by 6
The Application of Precision Medicine in Structural Heart Diseases: A Step towards the Future
Chrysostomidis, G., Apostolos, A., Papanikolaou, A., Κωνσταντίνου, Κ., Tsigkas, G., Koliopoulou, A., & Chamogeorgakis, T. P. (2024) · Journal of Personalized Medicine · doi:10.3390/jpm14040375 · Cited by 5
Wang, S., Deng, S., Zhu, L., Lu, J., Wang, Y., & Lang, J. (2017) · PubMed Central · doi:10.4103/0366-6999.215337 · Cited by 5
Chen, P., Yang, Y., Lin, J., & Liu, W.-H. (2022) · Polymers · doi:10.3390/polym14061072 · Cited by 5
3D bioprinting for scaffold fabrication
Singh, D. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-101103-4.00007-7 · Cited by 5
Chandrasekhar, J., & Saw, J. (2025) · Structural Heart · doi:10.1016/j.shj.2025.100427 · Cited by 4
Zhang, H., Shen, Y., Zhang, L., Song, C., Jing, Z., & Lu, Q. (2019) · Journal of interventional medicine · doi:10.1016/j.jimed.2019.10.006 · Cited by 4
Application of 3D Printing Technology in Heart Failure
Farooqi, K. M., Smerling, J. L., & Jorde, U. P. (2022) · Heart Failure Clinics · doi:10.1016/j.hfc.2021.11.002 · Cited by 4
The Use of Three-Dimensional Printing in Cardiac Structural Disease: A Review
Hornstein, G., Diep, C., Masson, J., Potvin, J., Gobeil, J., Noiseux, N., & Forcillo, J. (2023) · Innovations Technology and Techniques in Cardiothoracic and Vascular Surgery · doi:10.1177/15569845231161287 · Cited by 4
Gatti, M., Cosentino, A., Stura, E. C., Bergamasco, L., Garabello, D., Pennisi, G., Puppo, M., Salizzoni, S., Veglia, S., Davini, O., et al. (2020) · International journal of cardiac imaging · doi:10.1007/s10554-020-01902-9 · Cited by 4
3D printing applications for percutaneous structural interventions in congenital heart disease
Tredway, H. L., Pasumarti, N., Crystal, M. A., & Farooqi, K. M. (2020) · Mini-invasive Surgery · doi:10.20517/2574-1225.2020.77 · Cited by 4
Next-gen heart solutions: 3D bioprinting and AI in valve replacement therapy
Haddad, S., Karzoun, A. A., Raffoul, L., Mohamed, Y., Sultan, S., Abbas, A., & Zaino, B. (2025) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2025.100219 · Cited by 3
3D Printing from Cardiac Computed Tomography for Procedural Planning
Kuk, M., Mitsouras, D., Dill, K. E., Rybicki, F. J., & Dwivedi, G. (2017) · Current Cardiovascular Imaging Reports · doi:10.1007/s12410-017-9420-6 · Cited by 3
Self-citationDevelopment and validation of 3-dimensional simulators for penile prosthesis surgery
Reisman, Y., van Renterghem, K., Meijer, B., Ricapito, A., Fode, M. M., & Bettocchi, C. (2024) · The Journal of Sexual Medicine · doi:10.1093/jsxmed/qdae020 · Cited by 3
Computed tomography and magnetic resonance imaging assessment of aortic valve stenosis: an update
Choe, Y. H., Kim, S. M., & Park, S. (2020) · Precision and Future Medicine · doi:10.23838/pfm.2020.00093 · Cited by 3
Valvular Disease and Three-Dimensional Printing
Tang, J., Liu, Y., Zhu, D., Ma, Y., Lu, F., Fang, F., Shang, X., Yang, J. Z., Wu, Y., Pan, X., et al. (2020) · Springer eBooks · doi:10.1007/978-981-15-6957-9_6 · Cited by 3
Using 3D-Printed Models to Advance Clinical Care
Pantelic, M., Pantelic, M., Pietila, T., Rollet, M., Myers, E., Song, T. K., O’Neill, W. W., & Wang, D. D. (2019) · Cardiovascular Innovations and Applications · doi:10.15212/cvia.2019.0012 · Cited by 3
Chan, M., Huang, L. G., Wu, P.-J., & Yeh, C.-H. (2021) · Journal of Industrial and Production Engineering · doi:10.1080/21681015.2021.1943719 · Cited by 3
Saleh, Q. A., Moscona, J. C., & Jemtel, T. H. L. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-803917-5.00006-7 · Cited by 3
Restrepo, A., Chahal, D. S., & Gupta, A. K. (2020) · JACC Case Reports · doi:10.1016/j.jaccas.2020.02.003 · Cited by 3
Mao, Y., Liu, Y., Ma, Y., Zhai, M., Li, L., Jin, P., & Yang, J. Z. (2024) · Open Medicine · doi:10.1515/med-2024-0909 · Cited by 2
Application of cardiovascular 3-dimensional printing in Transcatheter aortic valve replacement
Ma, Y., Mao, Y., Zhu, G., & Yang, J. Z. (2022) · Cell Regeneration · doi:10.1186/s13619-022-00129-4 · Cited by 2
Three-dimensional Printing and Modeling in Interventional Cardiology: A Comprehensive Review
Huang, H. Y. R., Tayyab, H., Khan, A. A., Shah, U., Anantharaj, R. M., Rajak, K., Jiffry, R., Kantawala, B., Nasser, J. S., Shariff, S., et al. (2023) · Annals of Clinical Cardiology · doi:10.4103/accj.accj_20_23 · Cited by 2
Santo, C. A. D. E., Coelho, R. C., & Kunkel, M. E. (2025) · Research on Biomedical Engineering · doi:10.1007/s42600-025-00400-y · Cited by 2
Montealegre-Gallegos, M., Jeganathan, J., & Mahmood, F. U. (2017) · Springer eBooks · doi:10.1007/978-3-319-53523-4_13 · Cited by 2
Computed Tomography Assessment for Transcatheter Aortic Valve Replacement
Alkhouli, M. A., Winkler, L., & Tallaksen, R. J. (2018) · Interventional Cardiology Clinics · doi:10.1016/j.iccl.2018.03.004 · Cited by 2
Chandrasekhar, J., & Saw, J. (2025) · Structural Heart · doi:10.1016/j.shj.2025.100671 · Cited by 1
The Technical Basics of Cardiac 3D Printing
Mitsouras, D., & Giannopoulos, A. A. (2019) · Elsevier eBooks · doi:10.1016/b978-0-323-65391-6.00002-8 · Cited by 1
Self-citation3D Modeling as a Tool for Structural Heart Interventions
Vukicevic, M., Filippini, S., & Little, S. H. (2019) · Elsevier eBooks · doi:10.1016/b978-0-323-65391-6.00007-7 · Cited by 1
Quality assurance and printing accuracy analysis of 3D printing in medical applications
Chen, J. R., Morris, J. M., Wentworth, A. J., Sears, V. A., Duit, A. M., Erie, E., McGee, K. P., & Leng, S. (2022) · SPIE Medical Imaging: Imaging Informatics for Healthcare, Research, and Applications · doi:10.1117/12.2611263 · Cited by 1
Park, Y., & Yu, S.-M. (2022) · Applied Sciences · doi:10.3390/app12073339 · Cited by 1
Short Overview on Trans-Septal Puncture Phantoms Materials and Manufacturing Technologies
Stomaci, T., & Buonamici, F. (2024) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-52075-4_23 · Cited by 1
Advances and new developments in cardiovascular research with additive manufacturing
Rozina, R., Khan, A. A., Emmanuel, O., & Khan, T. A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95383-2.00024-x · Cited by 1
Surgical Predictive Planning Using 3D Printing
Bishawi, M. M., & Vemulapalli, S. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-803917-5.00012-2 · Cited by 1
Clinical Applications of Three-Dimensional Printing in Cardiovascular Disease
Kurata, A., Koyama, Y., Shirakawa, T., & Miyoshi, T. (2018) · Cardiovascular Imaging Asia · doi:10.22468/cvia.2018.00094 · Cited by 1
Patient-specific three-dimensional printing in cardiovascular disease
Sun, Z. (2020) · Australasian Medical Journal · doi:10.35841/1836-1935.13.4.136-141 · Cited by 1
Trends in the Use of 3D Printing with Medical Imaging
Jesus, T., & Alves, V. (2021) · Advances in intelligent systems and computing · doi:10.1007/978-3-030-72654-6_33 · Cited by 1
da-Silva, A. F., Donato, M. C., da-Silva, M. O., de Souza, S. D. G., Simão, T. R. P., Kietzer, K. S., Liberti, É. A., & Frank, P. W. (2023) · International Journal of Morphology · doi:10.4067/s0717-95022023000100073 · Cited by 1
Image quality is key in CT for transcatheter aortic valve replacement
Leipsic, J. A., & Blanke, P. (2016) · Journal of cardiovascular computed tomography · doi:10.1016/j.jcct.2016.07.012 · Cited by 1
Sex differences in the aortic root size: Implications for TAVR
Leipsic, J. A., Sellers, S., & Blanke, P. (2017) · Journal of cardiovascular computed tomography · doi:10.1016/j.jcct.2017.01.009 · Cited by 1
Re: “Bicuspid Aortic Valve Associated Aortopathy: A Primer for Cardiac Anaesthesiologists”
Lenihan, M., Vegas, A., Buys, M., Mashari, A., Feindel, C. M., & Djaiani, G. N. (2019) · Journal of Cardiothoracic and Vascular Anesthesia · doi:10.1053/j.jvca.2019.07.151 · Cited by 1
Berezin, A. Е. (2016) · Journal of Clinical Trials in Cardiology · doi:10.15226/2374-6882/3/1/00134
Werner, N., Kilkowski, C., Fraiture, B., Zeymer, U., Zahn, R., Gafoor, S. A., & Butera, G. (2017) · EuroIntervention · doi:10.4244/eij-d-15-00001
Giannopoulos, A. A., Mitsouras, D., Schwarz, B. A., Dill, K. E., & Rybicki, F. J. (2017) · Springer eBooks · doi:10.1007/978-3-319-61924-8_7
Self-citationSun, Z. (2017) · Heart Research - Open Journal · doi:10.17140/hroj-4-143
3D Printing As a New Technique in Management of Right Heart Pathology
Sun, Z. (2018) · Springer eBooks · doi:10.1007/978-3-319-73764-5_38
Simulation of Percutaneous Structural Interventions
Harb, S. C., Griffin, B. P., & Rodriguez, L. L. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-803917-5.00007-9
The Principle and Process of Digital Fabrication of Biomedical Objects
Choi, S., Cheung, H. H., & Zhu, W. K. (2017) · IGI Global eBooks · doi:10.4018/978-1-5225-2255-3.ch044
Bauch, T. D., Connuck, D., Mascarenhas, V., Patel, A. A., Stefanowicz, E., Vijayaraman, P., & Harjai, K. J. (2019) · Structural Heart · doi:10.1080/24748706.2019.1628379
Is There Role for 3D Modeling in Planning Acquired Heart Disease Surgery?
Giannopoulos, A. A., Buechel, R. R., Ouda, A., & Mitsouras, D. (2019) · Elsevier eBooks · doi:10.1016/b978-0-323-65391-6.00006-5
Self-citationFluid Dynamics Characterization of Transcatheter Aortic Valves
Barakat, M. (2020) · Digital Commons - DU (University of Denver)
Prediction of paravalvular leak post transcatheter aortic valve replacement
Qian, Z. Y., & Wang, Z. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-817428-9.00009-7
3D Printing in Interventional Radiology
Wattamwar, K., & Wake, N. (2021) · Elsevier eBooks · doi:10.1016/b978-0-323-77573-1.00001-4
Artificial Intelligence-Based Evaluation of Cardiac Valves
Feuchtner, G. M., Zujs, V., Bonaros, N. E., & Plank, F. (2022) · Contemporary medical imaging · doi:10.1007/978-3-030-92087-6_28
The Principle and Process of Digital Fabrication of Biomedical Objects
Choi, S., Cheung, H. H., & Zhu, W. K. (2018) · Advances in environmental engineering and green technologies book series · doi:10.4018/978-1-5225-7359-3.ch002
Shah, S. S., Behrle, N., Salek, M. S., Farahmand, M., Goyal, A., Divekar, A. A., & Kung, E. O. (2022) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2022-0004
Inovação do tratamento da estenose aórtica utilizando a impressão 3D
Borges, G. H. I., Zendron, I. M., Vaz, M. H. V., Macedo, R. M., Garcia, T. ́., Teixeira, L. S., Nascimento, D. G. D., Alvares, L. E. M. D. B., Resplande, C. A., Oliveira, A. L. S., et al. (2022) · Research Society and Development · doi:10.33448/rsd-v11i14.35450
Three-dimensional printing in cardiopulmonary disease
Sun, Z. (2023) · Elsevier eBooks · doi:10.1016/b978-0-443-18918-0.00006-1
Advanced Research in Pediatric Radiology and Nuclear Medicine
Ng, C. K. C. (2023) · MDPI eBooks · doi:10.3390/books978-3-0365-7958-0
Flandes‐Iparraguirre, M. (2023) · Deposito Adademico Digital Universidad De Navarra (University of Navarra) · doi:10.15581/10171/69152
Ryan, J. R., Sriwastwa, A., Ravi, P., Schwarz, B. A., & Giannopoulos, A. A. (2024) · Springer eBooks · doi:10.1007/978-3-031-42851-7_6
Safety, Efficacy, and Point‐of‐Care for 3D Printing in Healthcare
Malviya, R., & Sharma, R. (2024) · doi:10.1002/9781394234233.ch12
Three-dimensional modeling in modern cardiac surgery
Matrosov, V. V., Владимирович, К. В., Nemkov, A. S., & Хубулава, Г. Г. (2025) · Russian Journal of Cardiology and Cardiovascular Surgery · doi:10.17116/kardio202518041440
García, A. M., Gisbert, J. G., & Pérez, I. S. (2025) · Springer eBooks · doi:10.1007/978-3-031-94547-2_21
Errors and accuracy of 3D printed biomedical prototypes
Acharya, P., Sen, A., Ghosh, T. K., Pramanik, D., Kumar, R. A., & Hoque, M. E. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-16100-1.00016-3
Ali, A., Ballard, D. H., Althobaity, W., Christensen, A. M., Geritano, M., Ho, M., Liacouras, P. C., Matsumoto, J., Morris, J., Ryan, J. R., et al. (2020) · Figshare · doi:10.6084/m9.figshare.12997478
Self-citation
Metadata
- Authors
- Ripley, B., Kelil, T., Cheezum, M. K., Goncalves, A., Di Carli, M. F., Rybicki, F. J., Steigner, M., Mitsouras, D., & Blankstein, R.
- Affiliations
- Brigham and Women's Hospital (US)
- University of Ottawa (CA)
- Corresponding author
- Blankstein, Ron
- Venue
- Journal of Cardiovascular Computed Tomography
- Publisher
- Elsevier BV
- Published
- 2016-01
- Volume
- 10
- Issue
- 1
- Pages
- 28-36
- ISSN
- 1876-861X (ISSN-L)
- 1934-5925
- PMC
- PMC5573584
- OpenAlex
- W2213274111
- Cited by
- 205
- References
- 28
- Citations by year
- 2026: 3 · 2025: 10 · 2024: 12 · 2023: 15 · 2022: 17 · 2021: 18 · 2020: 31 · 2019: 23 · 2018: 29 · 2017: 36 · 2016: 11
- FWCI
- 18.44
- Type
- journal article
- Language
- en
- Open access
- green
- www.ncbi.nlm.nih.gov
- Locations
- Journal of cardiovascular computed tomography (publishedVersion)
- PubMed (publishedVersion)
- Europe PMC (PubMed Central) (acceptedVersion)
- PubMed Central (acceptedVersion)
- eScholarship (California Digital Library) (submittedVersion)
- Funders
- National Institute of Biomedical Imaging and Bioengineering (K01EB015868)
- Topics
- Health Sciences › Medicine › Cardiology and Cardiovascular Medicine › Cardiac Valve Diseases and Treatments
- Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
- Health Sciences › Medicine › Cardiology and Cardiovascular Medicine › Aortic Disease and Treatment Approaches
- Keywords
- 3D printing, transcatheter aortic valve implantation, paravalvular aortic regurgitation, aortic root, patient-specific 3D models, cardiac CT, surgical planning, valve sizing, aortic annulus measurement
- MeSH terms
- Aged, Aged, 80 and over, Aortic Valve, Aortic Valve Insufficiency, Aortography, Computer Simulation, Female, Heart Valve Prosthesis, Humans, Male, Models, Anatomic, Models, Cardiovascular, Prosthesis Design, Tomography, X-Ray Computed, User-Computer Interface, Treatment Outcome, Prosthesis Fitting, Equipment Failure Analysis, Imaging, Three-Dimensional, Transcatheter Aortic Valve Replacement, Patient-Specific Modeling, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
