The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
The greenhouse gas implications of using ground granulated blast furnace slag as a cement substitute
Open accessAbstract
The use of supplementary cementitious materials (SCMs) in concrete blends is often promoted as a way to reduce the environmental impacts of concrete. SCMs can include fly ash, silica fume or steel slag. Another SCM, and the focus of this paper, is ground-granulated blast furnace slag (GGBFS), which can be co-produced with pig iron. Previous studies that cite environmental benefits of GGBFS in concrete do not account for supply conditions of GGBFS. In this paper, this supply assumption is challenged through a market analysis. The environmental consequences of GGBFS supply conditions are assessed using a system expansion approach to life cycle assessment. When the supply of GGBFS is not constrained, greenhouse reductions of a given GGBFS-concrete blend are in the order of 47.5%. However, market analysis indicates that the supply of GGBFS can be constrained. Under a supply constraint, the 47.5% additional greenhouse reductions from the use of GGBFS are no longer applicable. Environmental certification schemes could ensure ongoing benefits of GGBFS by promoting the use of steel sourced from a supply chain which co-produces granulated blast furnace slag at the blast furnace.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Climate change 2007: the physical science basis
Solomon, S., Qin, D., Manning, M., Marquis, M. C., Averyt, K. B., Tignor, M., Miller, H. L., & Chen, Z. (2007) · Cited by 23,383
Recent developments in life cycle assessment
Finnveden, G., Hauschild, M. Z., Ekvall, T., Guinée, J., Heijungs, R., Hellweg, S., Koehler, A., Pennington, D., & Suh, S. (2009) · Journal of Environmental Management · doi:10.1016/j.jenvman.2009.06.018 · Cited by 3,444
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
The greening of the concrete industry
Meyer, C. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2008.12.010 · Cited by 1,548
C ARBON D IOXIDE E MISSIONS FROM THE G LOBAL C EMENT I NDUSTRY
Worrell, E., Price, L., Martin, N., Hendriks, C., & Meida, L. O. (2001) · Annual Review of Energy and the Environment · doi:10.1146/annurev.energy.26.1.303 · Cited by 1,488
Huntzinger, D. N., & Eatmon, T. D. (2009) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2008.04.007 · Cited by 1,392
GLOBAL, REGIONAL, AND NATIONAL FOSSIL-FUEL CO2 EMISSIONS
BODEN, MARLAND, & ANDRES (2010) · Carbon Dioxide Information Analysis Center (CDIAC) Datasets · doi:10.3334/cdiac/00001_v2010 · Cited by 1,001
Green house gas emissions due to concrete manufacture
Flower, D. J. M., & Sanjayan, J. G. (2007) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2007.05.327 · Cited by 912
Fire-resistant geopolymer produced by granulated blast furnace slag
Cheng, T. W., & Chiu, J. P. (2003) · Minerals Engineering · doi:10.1016/s0892-6875(03)00008-6 · Cited by 833
Van den Heede, P., & De Belie, N. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.01.004 · Cited by 824
Steel Slag—Its Production, Processing, Characteristics, and Cementitious Properties
Shi, C. (2004) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2004)16:3(230 · Cited by 734
Utilization of silica fume in concrete: Review of hardened properties
Siddique, R. (2011) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2011.06.012 · Cited by 662
High performance cementing materials from industrial slags — a review
Shi, C., & Qian, J. (2000) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(99)00060-9 · Cited by 648
Utilization of steel slag for Portland cement clinker production
Tsakiridis, P. E., Papadimitriou, G. D., Tsivilis, S., & Koroneos, C. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.07.093 · Cited by 610
Sustainability of Concrete Construction
Naik, T. R. (2008) · Practice Periodical on Structural Design and Construction · doi:10.1061/(asce)1084-0680(2008)13:2(98 · Cited by 488
Plevin, R. J., Delucchi, M. A., & Creutzig, F. (2014) · Journal of Industrial Ecology · doi:10.1111/jiec.12074 · Cited by 425
Avoiding Co‐Product Allocation in Life‐Cycle Assessment
Weidema, B. (2000) · Journal of Industrial Ecology · doi:10.1162/108819800300106366 · Cited by 398
Carbon dioxide emissions and climate change: policy implications for the cement industry
Rehan, R., & Nehdi, M. L. (2005) · Environmental Science & Policy · doi:10.1016/j.envsci.2004.12.006 · Cited by 337
Market information in life cycle assessment
Weidema, B. P. (2003) · Cited by 315
GLOBAL, REGIONAL, AND NATIONAL FOSSIL-FUEL CO2 EMISSIONS
Boden, T. A., Marland, G., & Andres, R. J. (2010) · Carbon Dioxide Information Analysis Center (CDIAC) Datasets · doi:10.3334/cdiac/00001_2010 · Cited by 310
Efficiency of GGBS in concrete
Ganesh Babu, K., & Sree Rama Kumar, V (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00271-4 · Cited by 277
Reducing the environmental impact of concrete and asphalt: a scenario approach
Blankendaal, T., Schuur, P., & Voordijk, H. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.10.012 · Cited by 243
Cement Manufacture and the Environment: Part I: Chemistry and Technology
van Oss, H. G., & Padovani, A. C. (2002) · Journal of Industrial Ecology · doi:10.1162/108819802320971650 · Cited by 237
O’Brien, K. R., Ménaché, J., & O’Moore, L. M. (2009) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-009-0105-5 · Cited by 160
Metallurgical slag as a component in blended cement
Rai, A., Prabakar, J., Raju, C. B., & Morchalle, R. K. (2002) · Construction and Building Materials · doi:10.1016/s0950-0618(02)00046-6 · Cited by 123
A functional model of supply chains and waste
Hicks, C., Heidrich, O., McGovern, T., & Donnelly, T. (2003) · International Journal of Production Economics · doi:10.1016/s0925-5273(03)00045-8 · Cited by 83
Some Engineering Properties of Slag Concrete as Influenced by Mix Proportioning and Curing
Swamy, R. N., & Bouikni, A. (1990) · ACI Materials Journal · doi:10.14359/2148 · Cited by 75
Lee, K.-M., & Park, P.-J. (2005) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2004.11.004 · Cited by 67
STRENGTH DEVELOPMENT OF CEMENT MORTAR AND CONCRETE INCORPORATING GGBFS
Shariq, M., Prasad, J., & Ahuja, A. K. (2008) · Cited by 31
Collins, C. T. (1981) · Minerals yearbook · Cited by 24
Cited by
Low-CO2 emission strategies to achieve net zero target in cement sector
Supriya, Chaudhury, R., Sharma, U., Thapliyal, P. C., & Singh, L. P. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.137466 · Cited by 576
Naqi, A., & Jang, J. G. (2019) · Sustainability · doi:10.3390/su11020537 · Cited by 406
Teh, S. H., Wiedmann, T., Castel, A., & de Burgh, J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.03.122 · Cited by 360
Gursel, A. P., Maryman, H., & Ostertag, C. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.06.029 · Cited by 320
Miller, S. A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.01.008 · Cited by 259
Metadata
- Authors
- Crossin, E.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2015-05
- Volume
- 95
- Pages
- 101-108
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W1994306681
- Cited by
- 275
- References
- 30
- FWCI
- 25.31
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.