The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Hybrid life cycle assessment of greenhouse gas emissions from cement, concrete and geopolymer concrete in Australia
Open accessAbstract
Concrete is the second most used material after water and the production of cement is responsible for 5–8% of global carbon dioxide emissions. The development of low-carbon concretes is pursued worldwide to help the construction industry make its contribution to decarbonising the built environment and achieving carbon reduction targets agreed under the Paris Climate Agreement. However, there is uncertainty around the actual amount of greenhouse gas emissions that can be avoided by employing alternative types of concrete. This study quantifies the carbon footprint intensities of Australian cement and concrete production, including ordinary Portland cement, standard ordinary Portland cement concrete, blended cement-based concrete and geopolymer concrete production. For the first time, an input-output based hybrid life-cycle assessment method is used for these products. The main goal of this paper is therefore to make a methodological comparison between process-based and hybrid life cycle assessment using the Australian cement and concrete production as a case study. A comparison with published results from process-based life-cycle inventories as well as a decomposition of results into product categories is provided. The hybrid life cycle assessment resulted in higher greenhouse gas emissions for ordinary Portland cement and all types of concrete due to the methodology incorporating an economy-wide system boundary, which includes the emissions from upstream processes. For geopolymer concrete in particular, the results were also dependent on the method applied for allocating greenhouse gas emissions from fly ash and slag. The findings from this study are likely to inform the development of strategies and policies aimed at greenhouse gas reduction in the cement and concrete industries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Input-output analysis foundations and extensions
Miller, R. E., & Blair, P. D. (2009) · Cited by 5,083
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Turner, L. K., & Collins, F. G. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.023 · Cited by 2,411
Environmental Repercussions and the Economic Structure: An Input-Output Approach
Leontief, W. (1970) · The Review of Economics and Statistics · doi:10.2307/1926294 · Cited by 1,959
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Environmental Repercussions And The Economic Structure: An Input-Output Approach
Leontief, W. (2018) · Green Accounting · doi:10.4324/9781315197715-18 · Cited by 1,506
Habert, G., d’Espinose de Lacaillerie, J. B., & Roussel, N. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.03.012 · Cited by 1,407
The ecoinvent Database: Overview and Methodological Framework (7 pp)
Frischknecht, R., Jungbluth, N., Althaus, H.-J., Doka, G., Dones, R., Heck, T., Hellweg, S., Hischier, R., Nemecek, T., Rebitzer, G., et al. (2005) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2004.10.181.1 · Cited by 1,114
System Boundary Selection in Life-Cycle Inventories Using Hybrid Approaches
Suh, S., Lenzen, M., Treloar, G. J., Hondo, H., Horvath, A., Huppes, G., Jolliet, O., Klann, U., Krewitt, W., Moriguchi, Y., et al. (2004) · Environmental Science & Technology · doi:10.1021/es0263745 · Cited by 1,025
Green house gas emissions due to concrete manufacture
Flower, D. J. M., & Sanjayan, J. G. (2007) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2007.05.327 · Cited by 912
Van den Heede, P., & De Belie, N. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.01.004 · Cited by 824
Errors in Conventional and Input‐Output—based Life—Cycle Inventories
Lenzen, M. (2000) · Journal of Industrial Ecology · doi:10.1162/10881980052541981 · Cited by 757
Methods for Life Cycle Inventory of a product
Suh, S., & Huppes, G. (2005) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2003.04.001 · Cited by 710
Handbook of Alkali-Activated Cements, Mortars and Concretes
(2015) · Elsevier eBooks · doi:10.1016/c2013-0-16511-7 · Cited by 688
Durability evaluation of geopolymer and conventional concretes
Albitar, M., Mohamed Ali, M. S., Visintin, P., & Drechsler, M. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.01.056 · Cited by 629
Chen, C., Habert, G., Bouzidi, Y., Jullien, A., & Ventura, A. (2010) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2010.04.001 · Cited by 566
Need for an embodied energy measurement protocol for buildings: A review paper
Dixit, M. K., Fernández-Solís, J. L., Lavy, S., & Culp, C. H. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.03.021 · Cited by 469
Life-cycle inventory analysis of concrete production: A critical review
Petek Gursel, A., Masanet, E., Horvath, A., & Stadel, A. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.03.005 · Cited by 451
An Introduction to Environmentally-Extended Input-Output Analysis
Kitzes, J. (2013) · Resources · doi:10.3390/resources2040489 · Cited by 356
Validation of a hybrid life-cycle inventory analysis method
Crawford, R. H. (2008) · Journal of Environmental Management · doi:10.1016/j.jenvman.2007.03.024 · Cited by 340
Life cycle inventories for the production of sodium silicates
Fawer, M., Concannon, M., & Rieber, W. (1999) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02979498 · Cited by 334
EDITORIAL: CARBON FOOTPRINT AND INPUT–OUTPUT ANALYSIS – AN INTRODUCTION
Wiedmann, T. (2009) · Economic Systems Research · doi:10.1080/09535310903541256 · Cited by 298
Self-citationSalas, D. A., Ramirez, A. D., Rodríguez, C. R., Petroche, D. M., Boero, A. J., & Duque-Rivera, J. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.11.078 · Cited by 282
The greenhouse gas implications of using ground granulated blast furnace slag as a cement substitute
Crossin, E. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.082 · Cited by 275
Construction sector views on low carbon building materials
Giesekam, J., Barrett, J. R., & Taylor, P. (2016) · Building Research & Information · doi:10.1080/09613218.2016.1086872 · Cited by 275
Feiz, R., Ammenberg, J., Baas, L., Eklund, M., Helgstrand, A., & Marshall, R. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.01.083 · Cited by 245
Developing a systematic framework for consistent allocation in LCA
Schrijvers, D. L., Loubet, P., & Sonnemann, G. (2016) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1063-3 · Cited by 209
Life cycle assessment (LCA) of alkali-activated cements and concretes
Ouellet-Plamondon, C., & Habert, G. (2015) · Handbook of Alkali-Activated Cements, Mortars and Concretes · doi:10.1533/9781782422884.5.663 · Cited by 207
Compiling and using input–output frameworks through collaborative virtual laboratories
Lenzen, M., Geschke, A., Wiedmann, T., Lane, J., Anderson, N., Baynes, T., Boland, J., Daniels, P., Dey, C., Fry, J., et al. (2014) · Science of The Total Environment · doi:10.1016/j.scitotenv.2014.03.062 · Cited by 195
Self-citationLife-cycle analysis of geopolymers
Weil, M., Dombrowski, K., & Buchwald, A. (2009) · Geopolymers · doi:10.1533/9781845696382.2.194 · Cited by 185
THE ROLE OF INPUT–OUTPUT ANALYSIS FOR THE SCREENING OF CORPORATE CARBON FOOTPRINTS
Huang, Y. A., Lenzen, M., Weber, C. L., Murray, J., & Matthews, H. S. (2009) · Economic Systems Research · doi:10.1080/09535310903541348 · Cited by 185
Environmental impact analysis of blast furnace slag applied to ordinary Portland cement production
Li, Y., Liu, Y., Gong, X., Nie, Z., Cui, S., Wang, Z., & Chen, W. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.071 · Cited by 181
A comparative study of carbon footprint and assessment standards
Gao, T., Liu, Q., & Wang, J. (2014) · International Journal of Low-Carbon Technologies · doi:10.1093/ijlct/ctt041 · Cited by 177
A guide for compiling inventories in hybrid life-cycle assessments: some Australian results
Lenzen, M. (2002) · Journal of Cleaner Production · doi:10.1016/s0959-6526(02)00007-0 · Cited by 175
Review on life cycle inventory: methods, examples and applications
Islam, S., Ponnambalam, S. G., & Lam, H. L. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.05.144 · Cited by 161
Embodied energy in buildings: wood versus concrete—reply to Börjesson and Gustavsson
Lenzen, M., & Treloar, G. (2002) · Energy Policy · doi:10.1016/s0301-4215(01)00142-2 · Cited by 159
Global Patterns and Trends for Non‐Metallic Minerals used for Construction
Miatto, A., Schandl, H., Fishman, T., & Tanikawa, H. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12471 · Cited by 154
Zhang, X., & Wang, F. (2016) · Building and Environment · doi:10.1016/j.buildenv.2016.05.018 · Cited by 149
Omar, W. M. S. W., Doh, J.-H., Panuwatwanich, K., & Miller, D. (2014) · Sustainable Cities and Society · doi:10.1016/j.scs.2013.06.002 · Cited by 139
Schrijvers, D., Loubet, P., & Sonnemann, G. (2016) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1069-x · Cited by 128
The LCA of portland cement production in China
Li, C., Cui, S., Nie, Z., Gong, X., Wang, Z., & Itsubo, N. (2014) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-014-0804-4 · Cited by 121
Hybrid input–output life cycle assessment of warm mix asphalt mixtures
Rodríguez-Alloza, A. M., Malik, A., Lenzen, M., & Gallego, J. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.11.035 · Cited by 117
Life Cycle Assessment: Principles, Practice and Prospects
Horne, R. E., Grant, T., & Verghese, K. (2009) · RMIT Research Repository (RMIT University Library) · Cited by 113
Chang, Y., Huang, Z., Ries, R. J., & Masanet, E. R. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.11.014 · Cited by 110
Life Cycle Assessment of applying CO 2 post-combustion capture to the Spanish cement production
García-Gusano, D., Garraín, D., Herrera, I., Cabal, H., & Lechón, Y. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.11.056 · Cited by 109
Carbon footprint scenarios for renewable electricity in Australia
Wolfram, P., Wiedmann, T., & Diesendorf, M. O. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.02.080 · Cited by 98
Self-citationLife Cycle Assessment – Principles, Practice and Prospects
XIMENES, F. D. A. (2010) · Austral Ecology · doi:10.1111/j.1442-9993.2009.02049.x · Cited by 96
Special Types of Life Cycle Assessment
Finkbeiner, M. (2016) · LCA compendium · doi:10.1007/978-94-017-7610-3 · Cited by 95
Quantification of building embodied energy in China using an input–output-based hybrid LCA model
Guan, J., Zhang, Z., & Chu, C. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.11.032 · Cited by 94
Variations in embodied energy and carbon emission intensities of construction materials
Omar, W. M. S. W., Doh, J., & Panuwatwanich, K. (2014) · Environmental Impact Assessment Review · doi:10.1016/j.eiar.2014.06.003 · Cited by 89
Miller, D., Doh, J., & Mulvey, M. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.01.071 · Cited by 88
Hybrid life-cycle assessment of algal biofuel production
Malik, A., Manfred Lenzen, A., Ralph, P. J., & Tamburic, B. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.10.132 · Cited by 78
Liu, C., Ahn, C. R., An, X., & Lee, S. H. (2013) · Journal of Construction Engineering and Management · doi:10.1061/(asce)co.1943-7862.0000752 · Cited by 62
The contribution of ISO 14067 to the evolution of global greenhouse gas standards—A review
Wu, P., Xia, B., & Wang, X. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.02.055 · Cited by 56
Impact of Singapore's importers on life-cycle assessment of concrete
Gursel, A. P., & Ostertag, C. P. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.01.051 · Cited by 52
Nakamura, S., & Nansai, K. (2016) · LCA compendium · doi:10.1007/978-94-017-7610-3_6 · Cited by 48
Life Cycle Assessment of Geopolymer Concrete – What is the Environmental Benefit
Stengel, T., Heinz, D., & Reger, J. (2009) · Cited by 48
Wiedmann, T. (2017) · Economic Systems Research · doi:10.1080/09535314.2017.1283295 · Cited by 41
Self-citationMaking Sense of the Minefield of Footprint Indicators
Ridoutt, B. G., Fantke, P., Pfister, S., et al. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b00163 · Cited by 39
Vendries, J., Hawkins, T. R., Marriott, J., & Khanna, V. (2016) · Journal of Industrial Ecology · doi:10.1111/jiec.12502 · Cited by 9
Cited by
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Shah, I. H., Miller, S. A., Jiang, D., & Myers, R. J. (2022) · Nature Communications · doi:10.1038/s41467-022-33289-7 · Cited by 417
Shehata, N., Mohamed, O. A., Sayed, E. T., Abdelkareem, M. A., & Olabi, A. G. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.155577 · Cited by 371
Green construction for low-carbon cities: a review
Chen, L., Huang, L., Hua, J., Chen, Z., Wei, L., Osman, A. I., Fawzy, S., Rooney, D. W., Dong, L., & Yap, P.-S. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01544-4 · Cited by 358
Life cycle assessment of geopolymer concrete
Salas, D. A., Ramirez, A. D., Ulloa, N., Baykara, H., & Boero, A. J. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.123 · Cited by 347
Metadata
- Authors
- Teh, S. H., Wiedmann, T., Castel, A., & de Burgh, J.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2017-05
- Volume
- 152
- Pages
- 312-320
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2601274759
- Cited by
- 360
- References
- 59
- FWCI
- 23.69
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.