The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
One-part geopolymer cement from slag and pretreated paper sludge
Open accessAbstract
The aim of this study was the valorization of paper sludge waste from paper industry in designing one-part geopolymer cement using ground granulated blast furnace slag as main precursor. The effects of increasing the amount of paper sludge pretreated with a constant amount of sodium hydroxide (2% of slag) on mechanical strength, heat evolution, setting time and durability were analyzed. The reaction products were characterized using X-ray diffraction and thermogravimetric analysis. The findings showed that paper sludge can successfully be used as a secondary source of calcium carbonate in the one-part (“just add water”) geopolymer. The compressive strength of the cured geopolymer increased with increasing the amount of paper sludge, and the non-reacted sludge acted as a filler. The maximum strength (42 MPa, 28 d) was reached at 18 wt-% paper sludge addition. The main reaction products were calcium aluminate silicate hydrate and hydrotalcite-like cementitious gels. From the perspective of its blast-furnace slag content, strength properties, water absorption and setting time, the one-part geopolymer cement could be classified as a CEM IIIC and Type 32.5N class cement under the European standard EN-197.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Ben Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
Hydration products of alkali activated slag cement
Wang, S.-D., & Scrivener, K. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00045-e · Cited by 997
Role of carbonates in the chemical evolution of sodium carbonate-activated slag binders
Bernal, S. A., Provis, J. L., Myers, R. J., San Nicolas, R., & van Deventer, J. S. J. (2015) · Materials and Structures · doi:10.1617/s11527-014-0412-6 · Cited by 334
Ke, X., Bernal, S. A., & Provis, J. L. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.11.012 · Cited by 328
Cited by
Yousefi Oderji, S., Chen, B., Ahmad, M. R., & Shah, S. F. A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.290 · Cited by 360
Rubberized geopolymer composites: A comprehensive review
Qaidi, S. M. A., Mohammed, A. S., Ahmed, H. U., Faraj, R. H., Emad, W., Tayeh, B. A., Althoey, F., Zaid, O., & Sor, N. H. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.06.123 · Cited by 256
Ma, C., Long, G., Shi, Y., & Xie, Y. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.060 · Cited by 253
Metadata
- Authors
- Adesanya, E., Ohenoja, K., Luukkonen, T., Kinnunen, P., & Illikainen, M.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 185
- Pages
- 168-175
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2793708044
- Cited by
- 202
- References
- 5
- FWCI
- 13.02
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: One-part geopolymer cement from slag and pretreated paper sludge. https://app.cochat.ai/papers/10.1016/j.jclepro.2018.03.007
- The paper
- Adesanya, E., Ohenoja, K., Luukkonen, T., Kinnunen, P., & Illikainen, M. (2018). One-part geopolymer cement from slag and pretreated paper sludge. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2018.03.007
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.