The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Fresh and hardened properties of one-part fly ash-based geopolymer binders cured at room temperature: Effect of slag and alkali activators
Abstract
Abstract Geopolymers are considered to be a sustainable and environmentally friendly replacement for ordinary Portland cement as they lead to a reduction in carbon footprint. The dosage and type of precursors and alkali activators have been known to be important parameters affecting the fresh and hardened properties of geopolymers. This study investigates the effect of slag content as well as type and dosage of alkali activators on one-part fly ash-based geopolymers cured at room temperature. Different ratios of fly ash were replaced with slag as a CaO-rich precursor. Setting time and flowability tests were carried out to evaluate the fresh properties, compressive and flexural strength experiments were conducted to determine the mechanical properties of the geopolymers. The mineralogy and microstructure of the samples were evaluated by Optical microscope, X-ray Diffraction (XRD) and Scanning Electron Microscope (SEM-EDS) analysis. The experimental results revealed that the increase of slag content improved the strength and reduced workability. Moreover, some microcracks were observed when over 15% of fly ash was replaced with slag. In terms of activators, the sodium metasilicate anhydrous provided optimum strength and higher flowability compared to the others. Microstructural analysis results showed the presence of more unreacted particles when less than 8% Na2SiO3 content as alkaline activator and also less than 15% slag as replacement was used in the system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Yip, C. K., Lukey, G. C., & van Deventer, J. S. J. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.10.042 · Cited by 1,274
Fly ash-based geopolymer: clean production, properties and applications
Zhuang, X. Y., Chen, L., Komarneni, S., Zhou, C. H., Tong, D. S., Yang, H. M., Yu, W. H., & Wang, H. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.019 · Cited by 1,020
NaOH-activated ground fly ash geopolymer cured at ambient temperature
Somna, K., Jaturapitakkul, C., Kajitvichyanukul, P., & Chindaprasirt, P. (2011) · Fuel · doi:10.1016/j.fuel.2011.01.018 · Cited by 995
A review on emission analysis in cement industries
Ali, M. B., Saidur, R., & Hossain, M. S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.02.014 · Cited by 941
Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes
Temuujin, J., van Riessen, A., & Williams, R. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.12.121 · Cited by 834
Production of bricks from waste materials – A review
Zhang, L. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.043 · Cited by 778
Lee, N. K., & Lee, H. K. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.107 · Cited by 754
Designing Precursors for Geopolymer Cements
Duxson, P., & Provis, J. L. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02787.x · Cited by 662
Role of slag in microstructural development and hardening of fly ash-slag geopolymer
Puligilla, S., & Mondal, P. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.10.004 · Cited by 593
Cited by
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Geopolymer concrete as sustainable material: A state of the art review
Farooq, F., Jin, X., Faisal Javed, M., Akbar, A., Izhar Shah, M., Aslam, F., & Alyousef, R. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124762 · Cited by 344
Factors Affecting the Compressive Strength of Geopolymers: A Review
Castillo, H., Collado, H., Droguett, T., Sánchez, S., Vesely, M., Garrido, P., & Palma, S. (2021) · Minerals · doi:10.3390/min11121317 · Cited by 231
Li, Q., Zhang, L., Gao, X., & Zhang, J. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.116990 · Cited by 135
Ambient-cured geopolymer concrete with single alkali activator
Zannerni, G. M., Fattah, K. P., & Al-Tamimi, A. K. (2020) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2019.e00131 · Cited by 108
Metadata
- Authors
- Yousefi Oderji, S., Chen, B., Ahmad, M. R., & Shah, S. F. A.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 225
- Pages
- 1-10
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2932346248
- Cited by
- 360
- References
- 40
- FWCI
- 27.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fresh and hardened properties of one-part fly ash-based geopolymer binders cured at room temperature: Effect of slag and alkali activators. https://app.cochat.ai/papers/10.1016/j.jclepro.2019.03.290
- The paper
- Yousefi Oderji, S., Chen, B., Ahmad, M. R., & Shah, S. F. A. (2019). Fresh and hardened properties of one-part fly ash-based geopolymer binders cured at room temperature: Effect of slag and alkali activators. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2019.03.290
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.