The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Effects of nanoparticle-enhanced phase change material (NPCM) on solar still productivity
Open accessAbstract
This paper investigates the effects of nanoparticle-enhanced phase change material (NPCM) on solar still operation and performance. Technical and economic aspects were considered, to show an advance on earlier works using virgin phase-change materials (PCM). Three types of nanoparticle (TiO2, CuO and GO) were impregnated individually at 0.3 weight% in paraffin to form NPCM-1, NPCM-2 and NPCM-3 respectively. Experiments were conducted with four solar stills (SS) each of 0.5 m2 area using respectively paraffin (SSPCM), paraffin-TiO2 (SSNPCM-1), paraffin-CuO (SSNPCM-2) and paraffin-GO (SSNPCM-3). There was observed an increase in thermal conductivity and a reduction in melting and solidification temperatures, with NPCM compared to PCM. The effects of NPCM on water temperature, storage temperature, hourly and annual productivity were determined. SSPCM, SSNPCM-1, SSNPCM-2 and SSNPCM-3 yielded 3.92, 4.94, 5.28 and 3.66 l/m2/day respectively, corresponding to 26 and 35% increases in productivity of SSNPCM-1 and 2 respectively over SSPCM. Economic analysis showed cost per liter (CPL) of water of $0.035, $0.028, $0.026 and $0.13 for SSPCM, SSNPCM-1, 2 and 3 respectively. Considering the advantages in productivity and CPL, SSNPCM-2 can be recommended as the best solar still compared to SSPCM, SSNPCM-1 and 3, providing clean water at less than half the cost of bottled water in India.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The reduction of graphene oxide
Pei, S., & Cheng, H.-M. (2012) · Carbon · doi:10.1016/j.carbon.2011.11.010 · Cited by 5,164
Sheng, Z.-H., Shao, L., Chen, J.-J., Bao, W.-J., Wang, F.-B., & Xia, X.-H. (2011) · ACS Nano · doi:10.1021/nn103584t · Cited by 2,573
Zhang, H., & Banfield, J. F. (2000) · The Journal of Physical Chemistry B · doi:10.1021/jp000499j · Cited by 1,551
Atomic and Electronic Structure of Graphene-Oxide
Mkhoyan, K. A., Contryman, A. W., Silcox, J., Stewart, D. A., Eda, G., Mattevi, C., Miller, S., & Chhowalla, M. (2009) · Nano Letters · doi:10.1021/nl8034256 · Cited by 1,187
Sarı, A., & Karaipekli, A. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.11.004 · Cited by 978
Reinforcement with graphene nanosheets in aluminum matrix composites
Wang, J., Li, Z., Fan, G., Pan, H., Chen, Z., & Zhang, D. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.01.012 · Cited by 882
Khodadadi, J. M., & Hosseinizadeh, S. F. (2007) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2007.02.005 · Cited by 715
Performance enhancement in latent heat thermal storage system: A review
Jegadheeswaran, S., & Pohekar, S. D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.06.024 · Cited by 702
Renteria, J. D., Ramirez, S., Malekpour, H., Alonso, B., Centeno, A., Zurutuza, A., Cocemasov, A. I., Nika, D. L., & Balandin, A. A. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501429 · Cited by 579
Single basin solar still with fin for enhancing productivity
Velmurugan, V., Gopalakrishnan, M., Raghu, R., & Srithar, K. (2008) · Energy Conversion and Management · doi:10.1016/j.enconman.2008.05.010 · Cited by 497
Review of researches and developments on solar stills
Kabeel, A. E., & El‐Agouz, S. A. (2011) · Desalination · doi:10.1016/j.desal.2011.03.042 · Cited by 469
Thermal performance of a single basin solar still with PCM as a storage medium
El-Sebaii, A. A., Al-Ghamdi, A. A., Al-Hazmi, F. S., & Faidah, A. S. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.10.014 · Cited by 446
Supercapacitor performances of thermally reduced graphene oxide
Zhao, B., Liu, P., Jiang, Y., Pan, D., Tao, H., Song, J., Fang, T., & Xu, W. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.09.074 · Cited by 441
Nanofluids effects on the evaporation rate in a solar still equipped with a heat exchanger
Mahian, O., Kianifar, A., Heris, S. Z., Wen, D., Sahin, A. Z., & Wongwises, S. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.04.025 · Cited by 404
Mehrali, M., Latibari, S. T., Mehrali, M., Metselaar, H. S. C., & Silakhori, M. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.11.023 · Cited by 375
Measurement of Specific Heat Functions by Differential Scanning Calorimetry.
O'Neill, M. J. (1966) · Analytical Chemistry · doi:10.1021/ac60242a011 · Cited by 375
Solar desalination using solar still enhanced by external solar collector and PCM
Al-Harahsheh, M., Abu-Arabi, M., Mousa, H. A., & Alzghoul, Z. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.09.073 · Cited by 369
Sustainable thermal energy storage technologies for buildings: A review
Parameshwaran, R., Kalaiselvam, S., Harikrishnan, S., & Elayaperumal, A. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.058 · Cited by 367
Fang, G., Li, H., Yang, F., Liu, X., & Wu, S. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.06.019 · Cited by 363
Kabeel, A. E., & Abdelgaied, M. (2016) · Desalination · doi:10.1016/j.desal.2016.01.006 · Cited by 336
Shi, J.-N., Ger, M.-D., Liu, Y.-M., Fan, Y.-C., Wen, N.-T., Lin, C.-K., & Pu, N.-W. (2013) · Carbon · doi:10.1016/j.carbon.2012.08.068 · Cited by 328
An experimental investigation of a v-corrugated absorber single-basin solar still using PCM
Shalaby, S. M., El-Bialy, E., & El-Sebaii, A. A. (2016) · Desalination · doi:10.1016/j.desal.2016.07.042 · Cited by 312
Lee, D., Kim, J.-W., & Kim, B. G. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp057225m · Cited by 310
Factors affecting basin type solar still productivity: A detailed review
Muftah, A. F., Alghoul, M. A., Fudholi, A., Abdul-Majeed, M. M., & Sopian, K. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.052 · Cited by 308
Thermal analysis of a weir-type cascade solar still integrated with PCM storage
Dashtban, M., & Tabrizi, F. F. (2011) · Desalination · doi:10.1016/j.desal.2011.06.044 · Cited by 290
Solar stills: A comprehensive review of designs, performance and material advances
Rufuss, D. D. W., Iniyan, S., Suganthi, L., & Davies, P. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.068 · Cited by 281
Self-citationSharma, R. K., Ganesan, P., Tyagi, V. V., Metselaar, H. S. C., & Sandaran, S. C. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.01.130 · Cited by 265
Combined experimental and numerical evaluation of a prototype nano-PCM enhanced wallboard
Biswas, K., Lu, J., Soroushian, P., & Shrestha, S. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.02.047 · Cited by 257
Arunkumar, T., Denkenberger, D., Ahsan, A., et al. (2013) · Desalination · doi:10.1016/j.desal.2013.01.018 · Cited by 253
He, Q., Wang, S., Tong, M., & Liu, Y. (2012) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.04.010 · Cited by 250
Nano-enhanced Phase Change Material for thermal management of BICPV
Sharma, S., Micheli, L., Chang, W., Tahir, A. A., Reddy, K. S., & Mallick, T. K. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.09.076 · Cited by 237
Sharma, A., Sharma, S. D., & Buddhi, D. (2002) · Energy Conversion and Management · doi:10.1016/s0196-8904(01)00131-5 · Cited by 231
Enhanced thermal conductivities of nanofluids containing graphene oxide nanosheets
Yu, W., Xie, H., & Bao, D. (2010) · Nanotechnology · doi:10.1088/0957-4484/21/5/055705 · Cited by 223
Kabeel, A. E., Abdelgaied, M., & Eisa, A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.144 · Cited by 223
Sustainable fresh water and power production by integrating PV panel in inclined solar still
Manokar, A. M., Winston, D. P., Kabeel, A. E., & Sathyamurthy, R. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.140 · Cited by 215
Preparation and thermal characteristics of CuO–oleic acid nanofluids as a phase change material
Harikrishnan, S., & Kalaiselvam, S. (2012) · Thermochimica Acta · doi:10.1016/j.tca.2012.01.018 · Cited by 209
The performance of a modified solar still using hot air injection and PCM
Kabeel, A. E., Abdelgaied, M., & Mahgoub, M. (2016) · Desalination · doi:10.1016/j.desal.2015.11.007 · Cited by 209
Comparative study on the solar still performance utilizing different PCM
Kabeel, A. E., El-Samadony, Y. A. F., & El-Maghlany, W. M. (2018) · Desalination · doi:10.1016/j.desal.2018.01.016 · Cited by 193
Productivity enhancements of compound parabolic concentrator tubular solar stills
Arunkumar, T., Velraj, R., Denkenberger, D. C., Sathyamurthy, R., Kumar, K. V., & Ahsan, A. (2016) · Renewable Energy · doi:10.1016/j.renene.2015.11.051 · Cited by 192
Al-Kayiem, H. H., & Lin, S. C. (2014) · Solar Energy · doi:10.1016/j.solener.2014.08.021 · Cited by 190
Sciacovelli, A., Colella, F., & Verda, V. (2013) · International Journal of Energy Research · doi:10.1002/er.2974 · Cited by 186
Desalination of the brackish water using a passive solar still with a heat energy storage system
Ansari, O., Asbik, M., Bah, A., Arbaoui, A., & Khmou, A. (2013) · Desalination · doi:10.1016/j.desal.2013.05.017 · Cited by 169
Harikrishnan, S., Magesh, S., & Kalaiselvam, S. (2013) · Thermochimica Acta · doi:10.1016/j.tca.2013.05.001 · Cited by 166
Asbik, M., Ansari, O., Bah, A., Zari, N., Mimet, A., & El-Ghetany, H. (2016) · Desalination · doi:10.1016/j.desal.2015.11.031 · Cited by 166
Tang, Y., Su, D., Huang, X. Y., Alva, G., Liu, L., & Fang, G. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.106 · Cited by 146
Abujazar, M. S. S., Suja, F. B., Ibrahim, I. A., Kabeel, A. E., & Sharil, S. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.09.092 · Cited by 129
Motahar, S., Nikkam, N., Alemrajabi, A. A., Khodabandeh, R., Toprak, M. S., & Muhammed, M. A. (2014) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2014.10.016 · Cited by 109
Rufuss, D. D. W., Iniyan, S., Suganthi, L., et al. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.11.009 · Cited by 106
Self-citationBoppella, R., Basak, P., & Manorama, S. (2012) · ACS Applied Materials and Interfaces · doi:10.1021/am201354r · Cited by 103
Modeling and analysis the productivity of solar desalination units with phase change materials
Mousa, H. A., & Gujarathi, A. M. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.04.013 · Cited by 100
Sharma, M., Singh, A. K., Yadav, D. N., Arora, S., & Vishwakarma, R. K. (2016) · LWT · doi:10.1016/j.lwt.2016.05.034 · Cited by 91
The experimental exploration of nano-Si3N4/paraffin on thermal behavior of phase change materials
Yang, Y., Luo, J., Song, G., Liu, Y., & Tang, G. (2014) · Thermochimica Acta · doi:10.1016/j.tca.2014.10.014 · Cited by 82
High purity graphenes prepared by a chemical intercalation method
Malik, S., Vijayaraghavan, A., Erni, R., et al. (2010) · Nanoscale · doi:10.1039/c0nr00248h · Cited by 63
Kundu, S., Das, A., Basu, A., et al. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.04.056 · Cited by 48
Jebasingh, B. E. (2015) · Journal of Energy Storage · doi:10.1016/j.est.2015.11.004 · Cited by 38
Selvam, L., Murugan, P., Sathishkumar, A., Kumaresan, V., & Velraj, R. (2015) · Thermal Science · doi:10.2298/tsci150612170l · Cited by 32
Al‐Hamadani, A. A. F., & Shukla, S. K. (2014) · Distributed Generation & Alternative Energy Journal · doi:10.1080/21563306.2014.11442728 · Cited by 22
Cited by
Advances in thermal energy storage: Fundamentals and applications
Ali, H. M., Rehman, T.-U., Arıcı, M., Said, Z., Duraković, B., Mohammed, H. I., Kumar, R., Rathod, M. K., Buyukdagli, O., & Teggar, M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101109 · Cited by 457
Leong, K. Y., Abdul Rahman, M. R., & Gurunathan, B. A. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2018.11.008 · Cited by 405
Nano-enhanced phase change materials: Fundamentals and applications
Said, Z., Pandey, A. K., Tiwari, A. K., Kalidasan, B., Jamil, F., Thakur, A. K., Tyagi, V. V., Sarı, A., & Ali, H. M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2024.101162 · Cited by 386
Kabeel, A. E., Sathyamurthy, R., Manokar, A. M., Sharshir, S. W., Essa, F. A., & Elshiekh, A. H. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101204 · Cited by 355
Thermophysical properties and applications of nano-enhanced PCMs: An update review
Yang, L., Huang, J.-N., & Zhou, F. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112876 · Cited by 343
Metadata
- Authors
- Dsilva Winfred Rufuss, D., Suganthi, L., Iniyan, S., & Davies, P. A.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 192
- Pages
- 9-29
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2802581525
- Cited by
- 316
- References
- 57
- FWCI
- 5.71
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.