Operational control on environmental safety of potentially toxic elements during thermal conversion of metal-accumulator invasive ragweed to biochar
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Abstract Ragweed (Ambrosia artemisiifolia L.), a metal-accumulator invasive species, was pyrolyzed under a range of pyrolytic conditions to investigate their influence on immobilization and environmental safety of potentially toxic elements (PTEs) in the produced biochar. Conditions tested included temperature, retention time, heating rate, gas flow rate and particle size. Temperature and particle size had pronounced effects on product yields and physico-chemical characteristics of the produced biochar. All PTEs were enriched in the biochar, and the effect was more pronounced with higher temperature over 500 °C. However, fractionation of PTEs in biochar by following the sequential extraction process indicates that the mobile (bioavailable) fraction of most of the PTEs was transformed into more stabilized (residual) form (P
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dynamic Molecular Structure of Plant Biomass-Derived Black Carbon (Biochar)
Keiluweit, M., Nico, P. S., Johnson, M. G., & Kleber, M. (2010) · Environmental Science & Technology · doi:10.1021/es9031419 · Cited by 3,230
Lehmann, J. (2007) · Nature · doi:10.1038/447143a · Cited by 2,477
Surface chemistry variations among a series of laboratory-produced biochars
Mukherjee, A., Zimmerman, A. R., & Harris, W. (2011) · Geoderma · doi:10.1016/j.geoderma.2011.04.021 · Cited by 1,171
Heavy Metal Polluted Soils: Effect on Plants and Bioremediation Methods
Chibuike, G. U., & Obiora, S. C. (2014) · Applied and Environmental Soil Science · doi:10.1155/2014/752708 · Cited by 1,164
Yao, Y., Gao, B., Zhang, M., Inyang, M., & Zimmerman, A. R. (2012) · Chemosphere · doi:10.1016/j.chemosphere.2012.06.002 · Cited by 1,030
Ronsse, F., van Hecke, S., Dickinson, D., & Prins, W. (2013) · GCB Bioenergy · doi:10.1111/gcbb.12018 · Cited by 1,000
Cited by
An overview on engineering the surface area and porosity of biochar
Leng, L., Xiong, Q., Yang, L., Li, H., Zhou, Y., Zhang, W., Jiang, S., Li, H., & Huang, H. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.144204 · Cited by 1,314
Ahmed, R., Liu, G., Yousaf, B., Abbas, Q., Ullah, H., & Ali, M. U. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118409 · Cited by 349
Self-citationBandara, T., Franks, A., Xu, J., Bolan, N., Wang, H., & Tang, C. (2020) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2019.1642832 · Cited by 289
Biochar in Water and Wastewater Treatment—A Sustainability Assessment
Kamali, M., Appels, L., Kwon, E. E., Aminabhavi, T. M., & Dewil, R. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129946 · Cited by 226
Characterization of char generated from solar pyrolysis of heavy metal contaminated biomass
Zeng, K., Li, R., Minh, D. P., Weiss-Hortala, E., Nzihou, A., Zhong, D., & Flamant, G. (2020) · Energy · doi:10.1016/j.energy.2020.118128 · Cited by 55
Metadata
- Authors
- Yousaf, B., Liu, G., Abbas, Q., Ali, M. U., Wang, R., Ahmed, R., Wang, C., Al-Wabel, M. I., & Usman, A. R. A.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 195
- Pages
- 458-469
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2806957130
- Cited by
- 68
- References
- 6
- FWCI
- 3.78
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.