CoChat

Investigations of the possibility of lithium acquisition from geothermal water using natural and synthetic zeolites applying poly(acrylic acid)

Wiśniewska, Małgorzata, Fijałkowska, Gracja, Ostolska, Iwona, Franus, Wojciech, Nosal-Wiercińska, Agnieszka, Tomaszewska, Barbara, Goscianska, Joanna, Wójcik, Grzegorz · 2018 · Journal of Cleaner Production
Cited by 73

The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.

Abstract

The purpose of the paper was to investigate the possibility of obtaining lithium from geothermal water using natural and synthetic zeolites applying poly(acrylic acid). The efficiency of lithium ion sorption was determined depending on the type of tested zeolite, pH of the solution and the presence of anionic poly(acrylic acid). It was shown that the adsorption amount on the surface of aluminosilicates depends on their structure (size of specific surface area and porosity). Moreover, it was proved that the amount of adsorbed lithium ions increases with the increasing pH value of the solution. This is due to an increase in the concentration of negatively charged groups on the zeolite surface that capture the lithium cations from the solution effectively. In general, the addition of anionic polymer increases lithium ions sorption from the LiCl solution at pH 9, at which about 100% recovery of Li cations by Na-X zeolite was obtained. Under these conditions the poly(acrylic acid) carboxyl groups are completely dissociated which guarantees effective formation of polymer-metal complexes and results in the increase of amount of adsorbed lithium ions. The important parameter affecting lithium ions sorption amount is the order of adsorbates addition to the system since the polymer adsorption modifies surface properties of the solid thus influencing the ion exchange process of metal cations. The maximum recovery of lithium cations from geothermal water (at the natural pH 5.5) was obtained in the system containing natural clinoptilolite and anionic polymer. It amounted to almost 5 mg/L (with the initial content of Li+ ions in water about 10 mg/L).

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.jclepro.2018.05.287

Cites

4 of 4 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 4 references

Cited by

Metadata

Authors
Wiśniewska, M., Fijałkowska, G., Ostolska, I., Franus, W., Nosal-Wiercińska, A., Tomaszewska, B., Goscianska, J., & Wójcik, G.
Venue
Journal of Cleaner Production
Publisher
Elsevier BV
Published
2018-09
Volume
195
Pages
821-830
ISSN
0959-6526 (ISSN-L)
OpenAlex
W2805395767
Cited by
73
References
4
FWCI
2.88
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.