The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Assessment of hydrogen direct reduction for fossil-free steelmaking
Open accessAbstract
Climate policy objectives require zero emissions across all sectors including steelmaking. The fundamental process changes needed for reaching this target are yet relatively unexplored. In this paper, we propose and assess a potential design for a fossil-free steelmaking process based on direct reduction of iron ore with hydrogen. We show that hydrogen direct reduction steelmaking needs 3.48 MWh of electricity per tonne of liquid steel, mainly for the electrolyser hydrogen production . If renewable electricity is used the process will have essentially zero emissions. Total production costs are in the range of 361–640 EUR per tonne of steel, and are highly sensitive to the electricity price and the amount of scrap used. Hydrogen direct reduction becomes cost competitive with an integrated steel plant at a carbon price of 34–68 EUR per tonne CO2 and electricity costs of 40 EUR/MWh. A key feature of the process is flexibility in production and electricity demand, which allows for grid balancing through storage of hydrogen and hot-briquetted iron, or variations in the share of scrap used.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Schiebahn, S., Grube, T., Robinius, M., Tietze, V., Kumar, B., & Stolten, D. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.01.123 · Cited by 823
The investment costs of electrolysis – A comparison of cost studies from the past 30 years
Saba, S. M., Müller, M., Robinius, M., & Stolten, D. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.11.115 · Cited by 480
Sustainable materials with both eyes open
(2013) · Choice Reviews Online · doi:10.5860/choice.50-3871 · Cited by 434
Flachsland, C. (2015) · OPUS 4 (Zuse Institute Berlin) · Cited by 409
Hasanbeigi, A., Arens, M., & Price, L. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.02.031 · Cited by 342
Pauliuk, S., Milford, R. L., Müller, D. B., & Allwood, J. M. (2013) · Environmental Science & Technology · doi:10.1021/es303149z · Cited by 334
Techno-economic evaluation of innovative steel production technologies
Fischedick, M., Marzinkowski, J., Winzer, P., & Weigel, M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.05.063 · Cited by 304
Otto, A., Robinius, M., Grube, T., Schiebahn, S., Praktiknjo, A., & Stolten, D. (2017) · Energies · doi:10.3390/en10040451 · Cited by 266
Prospective scenarios on energy efficiency and CO2 emissions in the European Iron & Steel industry
Pardo, N., & Moya, J. A. (2013) · Energy · doi:10.1016/j.energy.2013.03.015 · Cited by 262
The Roles of Energy and Material Efficiency in Meeting Steel Industry CO 2 Targets
Milford, R. L., Pauliuk, S., Allwood, J. M., & Müller, D. B. (2013) · Environmental Science & Technology · doi:10.1021/es3031424 · Cited by 254
Global climate policy and deep decarbonization of energy-intensive industries
Åhman, M., Nilsson, L. J., & Johansson, B. (2017) · Climate Policy · doi:10.1080/14693062.2016.1167009 · Cited by 242
Self-citationWorld Best Practice Energy Intensity Values for SelectedIndustrial Sectors
Worrell, E., Price, L., Neelis, M., Galitsky, C., & Zhou, N. (2007) · doi:10.2172/927032 · Cited by 234
Transition to Renewable Energy Systems
(2013) · Wiley eBooks · doi:10.1002/9783527673872 · Cited by 161
Status on Technologies for Hydrogen Production by Water Electrolysis
Mergel, J., Carmo, M., & Fritz, D. (2013) · Wiley eBooks · doi:10.1002/9783527673872.ch22 · Cited by 76
Multicriteria analysis of primary steelmaking technologies
Weigel, M., Fischedick, M., Marzinkowski, J. M., & Winzer, P. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.07.132 · Cited by 73
Technology data for high temperature solid oxide electrolyser cells, alkali and PEM electrolysers
Mathiesen, B. V., Ridjan, I., Connolly, D. E., Nielsen, M. P., Hendriksen, P. V., Mogensen, M. B., Jensen, S. H., & Ebbesen, S. D. (2013) · VBN Forskningsportal (Aalborg Universitet) · Cited by 50
Cited by
Rissman, J., Bataille, C., Masanet, E., Aden, N., Morrow, W. R., Zhou, N., Elliott, N., Dell, R., Heeren, N., Huckestein, B., et al. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114848 · Cited by 1,040
Strategies for improving the sustainability of structural metals
Raabe, D., Tasan, C. C., & Olivetti, E. A. (2019) · Nature · doi:10.1038/s41586-019-1702-5 · Cited by 724
Low-carbon production of iron and steel: Technology options, economic assessment, and policy
Fan, Z., & Friedmann, S. J. (2021) · Joule · doi:10.1016/j.joule.2021.02.018 · Cited by 671
Griffiths, S., Sovacool, B. K., Kim, J., Bazilian, M., & Uratani, J. M. (2021) · Energy Research & Social Science · doi:10.1016/j.erss.2021.102208 · Cited by 583
Ren, L., Zhou, S., Peng, T., & Ou, X. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110846 · Cited by 532
Metadata
- Authors
- Vogl, V., Åhman, M., & Nilsson, L. J.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 203
- Pages
- 736-745
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2889165195
- Cited by
- 779
- References
- 16
- FWCI
- 29.58
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.