The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Recycling glass fiber thermoplastic composites from wind turbine blades
Open accessAbstract
Abstract Thermoplastic resin systems have long been discussed for use in large-scale composite parts but have yet to be exploited by the energy industry. The use of these resins versus their thermosetting counterparts can potentially introduce cost savings due to non-heated tooling, shorter manufacturing cycle times, and recovery of raw materials from the retired part. Because composite parts have high embedded energy, recovery of their constituent materials can provide substantial economic benefit. This study determines the feasibility of recycling composite wind turbine blade components that are fabricated with glass fiber reinforced Elium® thermoplastic resin. Several experiments are conducted to tabulate important material properties that are relevant to recycling, including thermal degradation, grinding, and dissolution of the polymer matrix to recover the constituent materials. Dissolution, which is a process unique to thermoplastic matrices, allows recovery of both the polymer matrix and full-length glass fibers, which maintain their stiffness (190 N/(mm g)) and strength (160 N/g) through the recovery process. Injection molded regrind material is stiffer (12 GPa compared to 10 GPa) and stronger (150 MPa compared to 84 MPa) than virgin material that had shorter fibers. An economic analysis of the technical data shows that recycling thermoplastic–glass fiber composites via dissolution into their constituent parts is commercially feasible under certain conditions. This analysis concludes that 50% of the glass fiber must be recovered and resold for a price of $0.28/kg. Additionally, 90% of the resin must be recovered and resold at a price of $2.50/kg.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Oliveux, G., Dandy, L. O., & Leeke, G. A. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.01.004 · Cited by 1,287
Recycling technologies for thermoset composite materials—current status
Pickering, S. J. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.05.030 · Cited by 1,278
Updating and further expanding GSK's solvent sustainability guide
Alder, C. M., Hayler, J. D., Henderson, R. K., Redman, A. M., Shukla, L., Shuster, L. E., & Sneddon, H. F. (2016) · Green Chemistry · doi:10.1039/c6gc00611f · Cited by 1,041
Recent advances in carbon-fiber-reinforced thermoplastic composites: A review
Yao, S.-S., Jin, F., Rhee, K. Y., Hui, D., & Park, S. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.12.007 · Cited by 976
Pimenta, S., & Pinho, S. T. (2011) · Waste Management · doi:10.1016/j.wasman.2010.09.019 · Cited by 967
Recycling of composite materials
Yang, Y., Boom, R., Irion, B., van Heerden, D.-J., Kuiper, P., & de Wit, H. (2012) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/j.cep.2011.09.007 · Cited by 853
Fu, S. (1996) · Composites Science and Technology · doi:10.1016/s0266-3538(96)00072-3 · Cited by 847
Fuel Oil Quality of Biomass Pyrolysis OilsState of the Art for the End Users
Oasmaa, A., & Czernik, S. (1999) · Energy & Fuels · doi:10.1021/ef980272b · Cited by 805
Methods for polyurethane and polyurethane composites, recycling and recovery: A review
Zia, K. M., Bhatti, H. N., & Ahmad Bhatti, I. (2007) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2007.05.004 · Cited by 786
Recent advances in low‐cost carbon fiber manufacture from lignin
Baker, D. A., & Rials, T. G. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39273 · Cited by 664
Life cycle energy analysis of fiber-reinforced composites
Song, Y. S., Youn, J. R., & Gutowski, T. G. (2009) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.05.020 · Cited by 548
Witik, R. A., Teuscher, R., Michaud, V., Ludwig, C., & Månson, J.-A. E. (2013) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.02.009 · Cited by 408
Chemical recycling of carbon fibre reinforced composites in nearcritical and supercritical water
Piñero-Hernanz, R., Dodds, C., Hyde, J., García-Serna, J., Poliakoff, M., Lester, E., Cocero, M. J., Kingman, S., Pickering, S., & Wong, K. H. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.01.001 · Cited by 366
Technology readiness level assessment of composites recycling technologies
Rybicka, J., Tiwari, A., & Leeke, G. A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.08.104 · Cited by 308
Recycling of FRP composites: reusing fine GFRP waste in concrete mixtures
Correia, J. R., Almeida, N. M., & Figueira, J. R. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.05.018 · Cited by 261
Enthalpy for Pyrolysis for Several Types of Biomass
Daugaard, D. E., & Brown, R. C. (2003) · Energy & Fuels · doi:10.1021/ef020260x · Cited by 258
Life‐Cycle Energy, Costs, and Strategies for Improving a Single‐Family House
Keoleian, G. A., Blanchard, S., & Reppe, P. (2000) · Journal of Industrial Ecology · doi:10.1162/108819800569726 · Cited by 244
Energy demand in mechanical recycling of glass fibre reinforced thermoset plastic composites
Shuaib, N. A., & Mativenga, P. T. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.01.070 · Cited by 218
Bai, Y., Wang, Z., & Feng, L. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.07.057 · Cited by 209
Separation process engineering
Wankat, P. C. (2007) · Cited by 195
La Rosa, A. D., Banatao, D. R., Pastine, S. J., Latteri, A., & Cicala, G. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.08.015 · Cited by 188
Liu, Y., Liu, J., Jiang, Z., & Tang, T. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.12.028 · Cited by 183
Heats of combustion of high temperature polymers
Walters, R. N., Hackett, S. M., & Lyon, R. E. (2000) · Fire and Materials · doi:10.1002/1099-1018(200009/10)24:5<245::aid-fam744>3.0.co;2-7 · Cited by 181
Recycling of the fibrous fraction of reinforced thermoset composites
Kouparitsas, C. E., Kartalis, C. N., Varelidis, P. C., Tsenoglou, C. J., & Papaspyrides, C. D. (2002) · Polymer Composites · doi:10.1002/pc.10468 · Cited by 167
Recovery of carbon fibres by the thermolysis and gasification of waste prepreg
López, F. A., Rodríguez, O., Alguacil, F. J., García-Díaz, I., Centeno, T. A., Fierro, J. L. G., & González, C. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.04.012 · Cited by 166
Ribeiro, M. C. S., Castro, A. C. M., Silva, F. J. G., Santos, J. D., Meixedo, J. P., Fiúza, A., Dinis, M. D. L., & Alvim, M. R. (2013) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2013.10.001 · Cited by 155
Monomer recovery by pyrolysis of poly(methyl methacrylate) (PMMA)
Kaminsky, W., & Franck, J. (1991) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(91)80052-a · Cited by 149
Management, recycling and reuse of waste composites
Goodship, V. (2010) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845697662 · Cited by 139
Liu, Y., Farnsworth, M., & Tiwari, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.08.038 · Cited by 133
Capturing composites manufacturing waste flows through process mapping
Rybicka, J., Tiwari, A., Campo, P. A. D., & Howarth, J. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.12.033 · Cited by 100
Innovative thermal and acoustic insulation foam from recycled waste glass powder
D’Amore, G. K. O., Caniato, M., Travan, A., Turco, G., Marsich, L., Ferluga, A., & Schmid, C. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.07.214 · Cited by 96
Techno-economic analysis of a megawatt-scale thermoplastic resin wind turbine blade
Murray, R. E., Jenne, S., Snowberg, D., Berry, D., & Cousins, D. S. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.07.032 · Cited by 83
Self-citationAbeykoon, C., Kelly, A. L., Brown, E. C., Vera‐Sorroche, J., Coates, P. D., Harkin‐Jones, E., Howell, K. B., Deng, J., Li, K., & Price, M. A. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.09.024 · Cited by 75
Complete Recycling of Composite Material Comprising Polybutylene Terephthalate and Copper
Knappich, F., Hartl, F., Schlummer, M., et al. (2017) · Recycling · doi:10.3390/recycling2020009 · Cited by 30
Recycling wind turbine blade composite material as aggregate in concrete
Fox, T. R. (2016) · doi:10.31274/etd-180810-4761 · Cited by 23
Cousins, D. S., Lowe, C., Swan, D., Barsotti, R., Zhang, M., Gleich, K., Berry, D., Snowberg, D., & Dorgan, J. R. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.44868 · Cited by 23
Self-citation
Cited by
Grand challenges in the science of wind energy
Veers, P., Dykes, K., Lantz, E., Barth, S., Bottasso, C. L., Carlson, O., Clifton, A., Green, J., Green, P., Holttinen, H., et al. (2019) · Science · doi:10.1126/science.aau2027 · Cited by 1,242
Rani, M., Choudhary, P., Krishnan, V., & Zafar, S. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108768 · Cited by 521
Karuppannan Gopalraj, S., & Kärki, T. (2020) · SN Applied Sciences · doi:10.1007/s42452-020-2195-4 · Cited by 452
Recent progress in recycling carbon fibre reinforced composites and dry carbon fibre wastes
Pakdel, E., Kashi, S., Varley, R., & Wang, X. (2021) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2020.105340 · Cited by 375
Khalid, M. Y., Arif, Z. U., Ahmed, W., & Arshad, H. (2022) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2021.e00382 · Cited by 314
Metadata
- Authors
- Cousins, D. S., Suzuki, Y., Murray, R. E., Samaniuk, J. R., & Stebner, A. P.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 209
- Pages
- 1252-1263
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2898428109
- Cited by
- 383
- References
- 37
- FWCI
- 16.95
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.