The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Trends in the global cement industry and opportunities for long-term sustainable CCU potential for Power-to-X
Open accessAbstract
In order to achieve targets set by the Paris Agreement and limit global average temperature increase to well below 2 °C above pre-industrial levels, an assessment and a low carbon transformation is needed for all types of human activities. Cement production is associated with high levels of CO2 emissions, with an average of 866 kg of CO2 emitted per ton of cement produced. This positions the cement industry as one of the main sources of anthropogenic greenhouse gas emissions accounting for about 5% of the total, right after the chemical industry and more relevant than the iron and steel industry. About 50% of the emissions are caused by burnt fuel, related transport and other inputs, which can be currently substituted by other measures. However, the CO2 emissions which originate from input limestone cannot be avoided. These process CO2 emissions present a potential for carbon capture and utilisation. This research proposes a global potential analysis of CCU as a possible solution for the CO2 emissions of cement production. Cement CCU may establish a substantial route to use CO2 for synthetic hydrocarbons production and thus contribute towards mitigating the non-substitutable CO2 content of the limestone-based raw material. The production of renewable electricity based synthetic hydrocarbon fuels by CO2 captured from cement plants, counts for a potential to produce between 3639 TWhth and 7355 TWhth of liquid hydrocarbons, or 6298 TWhth and 12723 TWhth of synthetic natural gas, or a mix of both at the expected global cement peak production in 2040.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Industrially interesting approaches to “low-CO2” cements
Gartner, E. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.01.021 · Cited by 2,016
Techno-economic assessment of CO2 direct air capture plants
Fasihi, M., Efimova, O., & Breyer, C. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.086 · Cited by 1,171
Self-citationGibbins, J., & Chalmers, H. (2008) · Energy Policy · doi:10.1016/j.enpol.2008.09.058 · Cited by 1,088
Carbon dioxide reduction potential in the global cement industry by 2050
Miller, S. A., John, V. M., Pacca, S. A., & Horvath, A. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.08.026 · Cited by 757
Air as the renewable carbon source of the future: an overview of CO2 capture from the atmosphere
Goeppert, A., Czaun, M., Surya Prakash, G. K., & Olah, G. A. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21586a · Cited by 724 · cited 1×
“Efficiencies up to 94% have been estimated [55], but in research with such high reported efficiencies the assumptions are often questionable or important factors, such as fuel derived additional materials derived emissions, etc. are left out.”
Substantial global carbon uptake by cement carbonation
Xi, F., Davis, S. J., Ciais, P., Crawford-Brown, D., Guan, D., Pade, C., Shi, T., Syddall, M., Lv, J., Ji, L., et al. (2016) · Nature Geoscience · doi:10.1038/ngeo2840 · Cited by 689 · cited 1×
“However, up to 43% of the raw material derived emissions (or around 21% of the current total emissions over an 83 years period [16, 56]) is eventually absorbed by the concrete over its operational lifetime.”
CO2 utilization: Developments in conversion processes
Alper, E., & Yuksel Orhan, O. (2017) · Petroleum · doi:10.1016/j.petlm.2016.11.003 · Cited by 679
Cement industry greenhouse gas emissions – management options and abatement cost
Kajaste, R., & Hurme, M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.07.055 · Cited by 584
Leeson, D., Mac Dowell, N., Shah, N., Petit, C., & Fennell, P. S. (2017) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2017.03.020 · Cited by 558
Maddalena, R., Roberts, J. J., & Hamilton, A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.138 · Cited by 532
Cited by
Techno-economic assessment of CO2 direct air capture plants
Fasihi, M., Efimova, O., & Breyer, C. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.086 · Cited by 1,171
Self-citationGriffiths, S., Sovacool, B. K., Kim, J., Bazilian, M., & Uratani, J. M. (2021) · Energy Research & Social Science · doi:10.1016/j.erss.2021.102208 · Cited by 583
Amran, M., Huang, S.-S., Onaizi, A. M., Makul, N., Abdelgader, H. S., & Ozbakkaloglu, T. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129029 · Cited by 548
Projecting future carbon emissions from cement production in developing countries
Cheng, D., Reiner, D. M., Yang, F., Cui, C., Meng, J., Shan, Y., Liu, Y., Tao, S., & Guan, D. (2023) · Nature Communications · doi:10.1038/s41467-023-43660-x · Cited by 425
Bogdanov, D., Gulagi, A., Fasihi, M., & Breyer, C. (2021) · Applied Energy · doi:10.1016/j.apenergy.2020.116273 · Cited by 421
Self-citationNagireddi, S., Agarwal, J. R., & Vedapuri, D. (2024) · ACS Engineering Au · doi:10.1021/acsengineeringau.3c00049 · Cited by 295
Lopez, G., Keiner, D., Fasihi, M., Koiranen, T., & Breyer, C. (2023) · Energy & Environmental Science · doi:10.1039/d3ee00478c · Cited by 284
Self-citationGorre, J., Ortloff, F., & van Leeuwen, C. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113594 · Cited by 267
Metadata
- Authors
- Farfan, J., Fasihi, M., & Breyer, C.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 217
- Pages
- 821-835
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2911839158
- Cited by
- 256
- References
- 50
- FWCI
- 10.19
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.