The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
A Techno-economic analysis and systematic review of carbon capture and storage (CCS) applied to the iron and steel, cement, oil refining and pulp and paper industries, as well as other high purity sources
Open accessAbstract
In order to meet the IPCC recommendation for an 80% cut in CO 2 emissions by 2050, industries will be required to drastically reduce their emissions. To meet these targets, technologies such as carbon capture and storage (CCS) must be part of the economic set of decarbonisation options for industry. A systematic review of the literature has been carried out on four of the largest industrial sectors (the iron and steel industry, the cement industry, the petroleum refining industry and the pulp and paper industry) as well as selected high-purity sources of CO 2 from other industries to assess the applicability of different CCS technologies. Costing data have been gathered, and for the cement, iron and steel and refining industries, these data are used in a model to project costs per tonne of CO 2 avoided over the time period extending from first deployment until 2050. A sensitivity analysis was carried out on the model to assess which variables had the greatest impact on the overall cost of wide-scale CCS deployment for future better targeting of cost reduction measures. The factors found to have the greatest overall impact were the initial cost of CCS at the start of deployment and the start date at which large scale deployment is started, whilst a slower initial deployment rate after the start date also leads to significantly increased costs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
THE INTERGOVERNMENTAL PANEL ON CLIMATE CHANGE
Shine, K. (1990) · Weather · doi:10.1002/j.1477-8696.1990.tb05660.x · Cited by 5,462
IPCC special report on carbon dioxide capture and storage
Metz, B., Davidson, O. R., de Coninck, H., Loos, M., & Meyer, L. (2021) · Cited by 4,875
Carbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
Self-citationComparative assessment of CO2 capture technologies for carbon-intensive industrial processes
Kuramochi, T., Ramírez, A., Turkenburg, W., & Faaij, A. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.05.001 · Cited by 474
Dean, C. C., Blamey, J., Florin, N. H., Al-Jeboori, M. J., & Fennell, P. S. (2011) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2010.10.013 · Cited by 375
Self-citationCO2 Capture in the Cement Industry
Barker, D. J., Turner, S. A., Napier-Moore, P. A., Clark, M., & Davison, J. E. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.014 · Cited by 313
Use of experience curves to estimate the future cost of power plants with CO2 capture
Rubin, E. S., Yeh, S., Antes, M., Berkenpas, M., & Davison, J. (2007) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00016-3 · Cited by 288
A brief overview of low CO2 emission technologies for iron and steel making
Xu, C. C., & Cang, D.-Q. (2010) · Journal of Iron and Steel Research International · doi:10.1016/s1006-706x(10)60064-7 · Cited by 255
Cost evaluation of CO2 sequestration by aqueous mineral carbonation
Huijgen, W. J. J., Comans, R. N. J., & Witkamp, G.-J. (2007) · Energy Conversion and Management · doi:10.1016/j.enconman.2007.01.035 · Cited by 249
Using CaO- and MgO-rich industrial waste streams for carbon sequestration
Stolaroff, J. K., Lowry, G. V., & Keith, D. W. (2005) · Energy Conversion and Management · doi:10.1016/j.enconman.2004.05.009 · Cited by 224
Cited by
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
Self-citationRissman, J., Bataille, C., Masanet, E., Aden, N., Morrow, W. R., Zhou, N., Elliott, N., Dell, R., Heeren, N., Huckestein, B., et al. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114848 · Cited by 1,040
Self-citationGür, T. M. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100965 · Cited by 821
Porous materials for carbon dioxide separations
Siegelman, R. L., Kim, E. J., & Long, J. R. (2021) · Nature Materials · doi:10.1038/s41563-021-01054-8 · Cited by 722
Bataille, C., Åhman, M., Neuhoff, K., Nilsson, L. J., Fischedick, M., Lechtenböhmer, S., Solano-Rodriquez, B., Denis-Ryan, A., Stiebert, S., Waisman, H., et al. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.107 · Cited by 680
Metadata
- Authors
- Leeson, D., Mac Dowell, N., Shah, N., Petit, C., & Fennell, P. S.
- Venue
- International Journal of Greenhouse Gas Control
- Publisher
- Elsevier BV
- Published
- 2017-06
- Volume
- 61
- Pages
- 71-84
- ISSN
- 1750-5836 (ISSN-L)
- OpenAlex
- W2605965223
- Cited by
- 558
- References
- 35
- FWCI
- 5.10
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Techno-economic analysis and systematic review of carbon capture and storage (CCS) applied to the iron and steel, cement, oil refining and pulp and paper industries, as well as other high purity sources. https://app.cochat.ai/papers/10.1016/j.ijggc.2017.03.020
- The paper
- Leeson, D., Mac Dowell, N., Shah, N., Petit, C., & Fennell, P. S. (2017). A Techno-economic analysis and systematic review of carbon capture and storage (CCS) applied to the iron and steel, cement, oil refining and pulp and paper industries, as well as other high purity sources. International Journal of Greenhouse Gas Control. https://doi.org/10.1016/j.ijggc.2017.03.020
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.