The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Effects of Si/Al ratio on the efflorescence and properties of fly ash based geopolymer
Abstract
Abstract Efflorescence seriously affects the practical application of geopolymer. In this study, fly ash based geopolymer was prepared by raw materials containing different Si/Al ratios. A test method of the efflorescence degree of geopolymer was proposed and applied. The effects of the Si/Al ratio on products, microstructure, pore structures, compressive strength, water loss rate and efflorescence of geopolymer were systematically investigated. The reaction products and structures of geopolymer were tested by XRD, FTIR, TG-DTA, SEM-EDS and BET. The results showed that the efflorescence degree of different samples can be compared by the test method simply, effectively and quantitatively. The products of geopolymer were mainly amorphous gels N(C)-A-S-H containing large amounts of Si and Al components. The structures, properties and efflorescence degree of the geopolymer were different due to the different Si/Al ratio. When the Si/Al ratio of geopolymer was 1.5, the content of [AlO4]- structures was highest, while the volume and size of pore were relatively small. The dense matrix and [AlO4]- structures of geopolymer can reduce the efflorescence degree significantly. This study can provide a reference for future investigation about efflorescence inhibition and efflorescence test methods of geopolymer.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Geopolymers: Inorganic polymeric new materials
Davidovits, J. (1991) · Journal of Thermal Analysis · doi:10.1007/bf01912193 · Cited by 4,251
The distribution of aluminum in the tetrahedra of silicates and aluminates
Loewenstein, W. B. (1954) · American Mineralogist · Cited by 1,794
Geopolymer Chemistry and Applications
Davidovits, J. (2008) · CERN Document Server (European Organization for Nuclear Research) · Cited by 1,692
Mechanism of geopolymerization and factors influencing its development: a review
Khale, D., & Chaudhary, R. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0401-4 · Cited by 1,463
A review: The comparison between alkali-activated slag (Si + Ca) and metakaolin (Si + Al) cements
Li, C., Sun, H., & Li, L. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.03.020 · Cited by 1,108
Duxson, P., Mallicoat, S. W., Lukey, G. C., Kriven, W. M., & van Deventer, J. S. J. (2007) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2006.05.044 · Cited by 907
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.03.013 · Cited by 651
Role of water in the synthesis of calcined kaolin-based geopolymer
ZUHUA, Z., XIAO, Y., HUAJUN, Z., & YUE, C. (2009) · Applied Clay Science · doi:10.1016/j.clay.2008.09.003 · Cited by 621
(Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement
Lecomte, I., Henrist, C., Liégeois, M., Maseri, F., Rulmont, A., & Cloots, R. (2006) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2005.12.021 · Cited by 597
Panda, B., & Tan, M. J. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.03.031 · Cited by 520
Efflorescence control in geopolymer binders based on natural pozzolan
Najafi Kani, E., Allahverdi, A., & Provis, J. L. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.07.007 · Cited by 476
Thermal evolution of metakaolin geopolymers: Part 1 – Physical evolution
Duxson, P., Lukey, G. C., & van Deventer, J. S. J. (2006) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2006.09.019 · Cited by 358
Phummiphan, I., Horpibulsuk, S., Rachan, R., Arulrajah, A., Shen, S.-L., & Chindaprasirt, P. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.07.067 · Cited by 332
Formation of Ceramics from Metakaolin‐Based Geopolymers. Part II: K‐Based Geopolymer
Bell, J. L., Driemeyer, P. E., & Kriven, W. M. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02922.x · Cited by 299
Mechanical and microstructural characterization of geopolymers derived from red mud and fly ashes
Hu, W., Nie, Q., Huang, B., Shu, X., & He, Q. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.086 · Cited by 274
Comparison of long term performance between alkali activated slag and fly ash geopolymer concretes
Wardhono, A., Gunasekara, C., Law, D. W., & Setunge, S. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.03.153 · Cited by 270
Geopolymer from kaolin in China: An overview
Zhang, Z. H., Zhu, H. J., Zhou, C. H., & Wang, H. (2016) · Applied Clay Science · doi:10.1016/j.clay.2015.04.023 · Cited by 259
Chemical deformation of metakaolin based geopolymer
Li, Z., Zhang, S., Zuo, Y., Chen, W., & Ye, G. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.03.017 · Cited by 254
Self-citationZhang, Z., Provis, J. L., Ma, X., Reid, A., & Wang, H. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.06.010 · Cited by 242
Solid state 27Al NMR and FTIR study of lanthanum aluminosilicate glasses
Clayden, N. J., Esposito, S., Aronne, A., & Pernice, P. (1999) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(99)00555-4 · Cited by 221
Suksiripattanapong, C., Horpibulsuk, S., Chanprasert, P., Sukmak, P., & Arulrajah, A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.02.040 · Cited by 194
Effects of red mud and Alkali-Activated Slag Cement on efflorescence in cement mortar
Kang, S.-P., & Kwon, S.-J. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.12.123 · Cited by 161
Nie, Q., Hu, W., Ai, T., Huang, B., Shu, X., & He, Q. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.144 · Cited by 152
Yao, X., Yang, T., & Zhang, Z. (2015) · Materials and Structures · doi:10.1617/s11527-015-0694-3 · Cited by 147
Avirneni, D., Peddinti, P. R. T., & Saride, S. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.162 · Cited by 146
Mechanical Properties and Microstructure of Class C Fly Ash-Based Geopolymer Paste and Mortar
Li, X., Ma, X., Zhang, S., & Zheng, E. (2013) · Materials · doi:10.3390/ma6041485 · Cited by 127
Huang, Y., & Han, M. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.07.029 · Cited by 115
Fly ash-based geopolymers: Effect of slag addition on efflorescence
Yao, X., Yang, T., & Zhang, Z. (2016) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-016-1430-8 · Cited by 41
Cited by
Amran, M., Debbarma, S., & Ozbakkaloglu, T. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121857 · Cited by 532
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Regulation of the Si/Al ratios and Al distributions of zeolites and their impact on properties
Li, J., Gao, M., Yan, W., & Yu, J. (2023) · Chemical Science · doi:10.1039/d2sc06010h · Cited by 404
Materials characterization of various lunar regolith simulants for use in geopolymer lunar concrete
Collins, P. J., Edmunson, J., Fiske, M., & Radlińska, A. (2022) · Advances in Space Research · doi:10.1016/j.asr.2022.03.012 · Cited by 70
Metadata
- Authors
- Wang, Y., Liu, X., Zhang, W., Li, Z., Zhang, Y., Li, Y., & Ren, Y.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 244
- Pages
- 118852
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2979705616
- Cited by
- 395
- References
- 29
- FWCI
- 20.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.