The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
A review on coal fly ash-based adsorbents for mercury and arsenic removal
Abstract
Abstract Emissions of mercury and arsenic from flue gas and water have become a great public concern due to their hazards to human health and the ecosystem. Many removal methods have been developed to capture mercury and arsenic from flue gas and water. Adsorption is the most potential one based on simple equipment, low energy consumption, and low corrosiveness. However, due to huge demand, inactivation or consumption, the cost of adsorbents is quite high, limiting the large-scale applications of adsorption technologies. Coal fly ash (CFA) is a kind of solid waste generated from coal combustion. Its emissions and accumulation have resulted in severe environmental consequences and disposal challenges. Recently, CFA has been identified as a suitable adsorbent to capture mercury and arsenic from water and flue gas due to its abundant supply, good pore structure, and low cost. Hence, the use of CFA as adsorbents/precursors to prepare mercury and arsenic adsorbents has great practical significance as it cannot only reduce their capture cost but also ameliorate problems associated with solid waste disposal. This comprehensive review provides the state-of-the-art of mercury and arsenic capture using adsorbents prepared from CFA. It is intended to advance our fundamental understanding of this emerging research field and outline directions to spur future research and development of sustainable and cost-effective mercury/arsenic adsorption technologies based on CFA re-utilization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Arsenic removal from water/wastewater using adsorbents—A critical review
Mohan, D., & Pittman, C. U. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.01.006 · Cited by 3,536
Low-cost adsorbents for heavy metals uptake from contaminated water: a review
Babel, S. (2003) · Journal of Hazardous Materials · doi:10.1016/s0304-3894(02)00263-7 · Cited by 3,444
Adsorption of CO2 from flue gas by novel seaweed-based KOH-activated porous biochars
Ding, S., & Liu, Y. (2020) · Fuel · doi:10.1016/j.fuel.2019.116382 · Cited by 311
Self-citationRemoval of Elemental Mercury by Bio-Chars Derived from Seaweed Impregnated with Potassium Iodine
Liu, Z., Yang, W., Xu, W., & Liu, Y. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.01.148 · Cited by 151
Self-citationSharma, G., Sinha, B., Pallavi, Hakkim, H., Chandra, B. P., Kumar, A., & Sinha, V. (2019) · Environmental Science & Technology · doi:10.1021/acs.est.8b07076 · Cited by 133
Removal of Gaseous Hg0 Using Novel Seaweed Biomass-Based Activated Carbon
Liu, Z., Adewuyi, Y. G., Shi, S., Chen, H., Li, Y., Liu, D., & Liu, Y. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.025 · Cited by 132
Self-citation
Cited by
Carbon dioxide capture using liquid absorption methods: a review
Ochedi, F. O., Yu, J., Yu, H., Liu, Y., & Hussain, A. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01093-8 · Cited by 481
Self-citationGaseous Hydrogen Sulfide Removal Using Macroalgae Biochars Modified Synergistically by H2SO4/H2O2
Chen, H., Han, X., & Liu, Y. (2021) · Chemical Engineering & Technology · doi:10.1002/ceat.202000461 · Cited by 22
Self-citation
Metadata
- Authors
- Ochedi, F. O., Liu, Y., & Hussain, A.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 267
- Pages
- 122143
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3025940076
- Cited by
- 166
- References
- 6
- FWCI
- 16.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A review on coal fly ash-based adsorbents for mercury and arsenic removal. https://app.cochat.ai/papers/10.1016/j.jclepro.2020.122143
- The paper
- Ochedi, F. O., Liu, Y., & Hussain, A. (2020). A review on coal fly ash-based adsorbents for mercury and arsenic removal. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2020.122143
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.