The DOI matches its Crossref record; 878 of the 878 references it cites were found in a registry or an index.
The past and future of sustainable concrete: A critical review and new strategies on cement-based materials
Abstract
The negative impacts of cement-based material (CBM) production are way bigger than ever expected. To illustrate the scale of this phenomenon, all the forests in the world, regardless of the fact that they are disappearing at an alarming rate, are not enough to offset even half the environmental impact (EI) of global aggregates and cement production. Thus, it is necessary to promote scientific research and guide more researchers and professionals in the construction industry to investigate the undiscovered sustainability paths, namely for concrete before and after end-of-life. For that purpose, a global and extensive review is made here to provide an overall view of concrete sustainability in all possible paths. Then, each path is organized as follows: (i) brief introduction, (ii) presentation of non-traditional materials and techniques that can be used for the selected strategy, (iii) their limitations and (iv) future trends. The study also identifies what is already known to avoid putting valuable research resources into redundant scientific studies. The following paths of concrete production sustainability were identified: mix composition (e.g. reduce the EI and resources use of binders, aggregates, water and reinforcement), materials manufacturing (e.g. new production techniques of cement, aggregates and steel bars), concrete mixing (e.g. mixer type and mixing method), on-site application (e.g. regular casting and digital concrete/3D printing), and in-service performance (e.g. increase the durability of reinforced concrete and carbon capture and thermal conductivity). On most of these paths, many studies have been made on the same non-traditional materials and techniques and similar outputs were obtained. Yet, many other non-traditional materials and techniques have not been explored before, or are incomplete in terms of the characteristics analysed. More than providing definite solutions, this contribution intends to open the minds of the readers to the vastly unexplored world of “green concrete”.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Jalal, M., Pouladkhan, A., Harandi, O. F., & Jafari, D. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.07.001 · Cited by 394
RetractedIOP Conference Series: Materials Science and Engineering
(2022) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/1231/1/011001 · Cited by 10,357
Concrete: Microstructure, Properties, and Materials
Mehta, P. K., & Monteiro, P. J. M. (2005) · Cited by 5,607
Scrivener, K. L., John, V. M., & Gartner, E. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.03.015 · Cited by 3,620
An overview of the chemical composition of biomass
Vassilev, S. V., Baxter, D., Andersen, L. K., & Vassileva, C. G. (2010) · Fuel · doi:10.1016/j.fuel.2009.10.022 · Cited by 2,519
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
Mechanical properties of nylon 6-clay hybrid
Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Fukushima, Y., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Materials Research · doi:10.1557/jmr.1993.1185 · Cited by 2,442
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,280
Candle Soot as a Template for a Transparent Robust Superamphiphobic Coating
Deng, X., Mammen, L., Butt, H.-J., & Vollmer, D. (2012) · Science · doi:10.1126/science.1207115 · Cited by 2,053
Lea's Chemistry of Cement and Concrete
(2019) · Elsevier eBooks · doi:10.1016/c2013-0-19325-7 · Cited by 1,901
Reference Module in Materials Science and Materials Engineering
Macovez, R., & Rudolf, P. (2016) · Elsevier eBooks · Cited by 1,887
Rao, A. B., & Rubin, E. S. (2002) · Environmental Science & Technology · doi:10.1021/es0158861 · Cited by 1,838
Developments and advanced applications of concrete-filled steel tubular (CFST) structures: Members
Han, L.-H., Li, W., & Bjorhovde, R. (2014) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2014.04.016 · Cited by 1,830
Robust self-cleaning surfaces that function when exposed to either air or oil
Lu, Y., Sathasivam, S., Song, J., Crick, C. R., Carmalt, C. J., & Parkin, I. P. (2015) · Science · doi:10.1126/science.aaa0946 · Cited by 1,808
Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review
Bakis, C. E., Bank, L. C., Brown, V. L., Cosenza, E., Davalos, J. F., Lesko, J. J., Machida, A., Rizkalla, S. H., & Triantafillou, T. C. (2002) · Journal of Composites for Construction · doi:10.1061/(asce)1090-0268(2002)6:2(73 · Cited by 1,807
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015) · International Journal of Polymer Science · doi:10.1155/2015/243947 · Cited by 1,657
3D printing using concrete extrusion: A roadmap for research
Buswell, R. A., Leal de Silva, W. R., Jones, S. Z., & Dirrenberger, J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.006 · Cited by 1,604
Application of bacteria as self-healing agent for the development of sustainable concrete
Jonkers, H. M., Thijssen, A., Muyzer, G., Copuroglu, O., & Schlangen, E. (2010) · Ecological Engineering · doi:10.1016/j.ecoleng.2008.12.036 · Cited by 1,568
Nath, P., & Sarker, P. K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.05.080 · Cited by 1,557
Utilization of sewage sludge in EU application of old and new methods—A review
Fytili, D., & Zabaniotou, A. (2008) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2006.05.014 · Cited by 1,457
Cement substitution by a combination of metakaolin and limestone
Antoni, M., Rossen, J., Martirena, F., & Scrivener, K. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.09.006 · Cited by 1,419
A review on ultra high performance concrete: Part I. Raw materials and mixture design
Shi, C., Wu, Z., Xiao, J., Wang, D., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.088 · Cited by 1,392
Garcia-Lodeiro, I., Palomo, A., Fernández-Jiménez, A., & Macphee, D. E. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.006 · Cited by 1,366
Hollaway, L. C. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.04.062 · Cited by 1,297
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
Akhtar, A., & Sarmah, A. K. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.085 · Cited by 1,250
Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume
Qing, Y., Zenan, Z., Deyu, K., & Rongshen, C. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2005.09.001 · Cited by 1,242
Silva, R. V., de Brito, J., & Dhir, R. K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.117 · Cited by 1,229
Self-citationMix design and fresh properties for high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G. F., & Thorpe, T. (2012) · Materials and Structures · doi:10.1617/s11527-012-9828-z · Cited by 1,218
Sisal fibre and its composites: a review of recent developments
Li, Y., Mai, Y.-W., & Ye, L. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00101-9 · Cited by 1,212
Waste heat recovery technologies and applications
Jouhara, H., Khordehgah, N., Almahmoud, S., Delpech, B., Chauhan, A., & Tassou, S. A. (2018) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2018.04.017 · Cited by 1,210
Water-entrained cement-based materials
Jensen, O. M., & Hansen, P. F. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00463-x · Cited by 1,199
Quantification of crack-healing in novel bacteria-based self-healing concrete
Wiktor, V., & Jonkers, H. M. (2011) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.03.012 · Cited by 1,183
Fernandez, R., Martirena, F., & Scrivener, K. L. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.09.013 · Cited by 1,180
Anticorrosive coatings: a review
Sørensen, P. A., Kiil, S., Dam‐Johansen, K., & Weinell, C. E. (2009) · Journal of Coatings Technology and Research · doi:10.1007/s11998-008-9144-2 · Cited by 1,178
Alkali-Activated Cements and Concretes
Shi, C., Krivenko, P. V., & Roy, D. (2006) · Taylor & Francis eBooks · doi:10.4324/9780203390672 · Cited by 1,164
Corrosion of steel in concrete
(2010) · Corrosion of Steel in Concrete · doi:10.4324/9780203414606_chapter_2 · Cited by 1,140
Study on the influence of attached mortar content on the properties of recycled concrete aggregate
de Juan, M. S., & Gutiérrez, P. A. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.04.012 · Cited by 1,109
Use of recycled plastic in concrete: A review
Siddique, R., Khatib, J., & Kaur, I. (2008) · Waste Management · doi:10.1016/j.wasman.2007.09.011 · Cited by 1,108
Richardson, I. G. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.05.034 · Cited by 1,082
A short review on basalt fiber reinforced polymer composites
Dhand, V., Mittal, G., Rhee, K. Y., Park, S.-J., & Hui, D. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2014.12.011 · Cited by 1,080
FERNANDEZBERTOS, M., SIMONS, S., HILLS, C., & CAREY, P. (2004) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2004.04.019 · Cited by 1,079
Mechanical behaviour of concrete made with fine recycled concrete aggregates
Evangelista, L., & de Brito, J. (2007) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2006.12.004 · Cited by 1,059
Self-citationSelf-healing concrete by use of microencapsulated bacterial spores
Wang, J. Y., Soens, H., Verstraete, W., & De Belie, N. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.11.009 · Cited by 1,052
Glass fiber-reinforced polymer composites – a review
Sathishkumar, T., Satheeshkumar, S., & Naveen, J. (2014) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684414530790 · Cited by 991
Structural built-up of cement-based materials used for 3D-printing extrusion techniques
Perrot, A., Rangeard, D., & Pierre, A. (2016) · Materials and Structures · doi:10.1617/s11527-015-0571-0 · Cited by 959
Deb, P. S., Nath, P., & Sarker, P. K. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.05.001 · Cited by 941
The mechanical properties of fly ash-based geopolymer concrete with alkaline activators
Ryu, G. S., Lee, Y. B., Koh, K. T., & Chung, Y. S. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.069 · Cited by 927
Duxson, P., Mallicoat, S. W., Lukey, G. C., Kriven, W. M., & van Deventer, J. S. J. (2007) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2006.05.044 · Cited by 907
Properties of concrete incorporating fine recycled aggregate
Khatib, J. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.017 · Cited by 886
3D printing trends in building and construction industry: a review
Tay, Y. W. D., Panda, B., Paul, S. C., Noor Mohamed, N. A., Tan, M. J., & Leong, K. F. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1326724 · Cited by 868
Properties of concrete made with recycled aggregate from partially hydrated old concrete
Katz, A. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)01033-5 · Cited by 865
Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.001 · Cited by 846
(1993) · Choice Reviews Online · doi:10.5860/choice.30-3839 · Cited by 836
Water Permeability and Autogenous Healing of Cracks in Concrete
(1999) · ACI Materials Journal · doi:10.14359/645 · Cited by 819
Comparative environmental assessment of natural and recycled aggregate concrete
Marinković, S., Radonjanin, V., Malešev, M., & Ignjatović, I. (2010) · Waste Management · doi:10.1016/j.wasman.2010.04.012 · Cited by 818
Characteristics of steel slags and their use in cement and concrete—A review
Jiang, Y., Ling, T.-C., Shi, C., & Pan, S.-Y. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.04.023 · Cited by 818
Geopolymers as an alternative to Portland cement: An overview
Singh, N. B., & Middendorf, B. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117455 · Cited by 817
Phase change materials (PCM) for cooling applications in buildings: A review
Souayfane, F., Fardoun, F., & Biwole, P.-H. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.04.006 · Cited by 813
Epoxy nanocomposites with high mechanical and tribological performance
Wetzel, B., Haupert, F., & Qiu Zhang, M. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00115-5 · Cited by 809
Bryers, R. W. (1996) · Progress in Energy and Combustion Science · doi:10.1016/0360-1285(95)00012-7 · Cited by 808
Thermal conductivity of concrete – A review
Asadi, I., Shafigh, P., Abu Hassan, Z. F. B., & Mahyuddin, N. B. (2018) · Journal of Building Engineering · doi:10.1016/j.jobe.2018.07.002 · Cited by 803
Utilization and efficiency of ground granulated blast furnace slag on concrete properties – A review
Özbay, E., Erdemir, M., & Durmuş, H. İ. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.12.153 · Cited by 800
Applications of shape memory alloys in civil structures
Song, G., Ma, N., & Li, H.-N. (2006) · Engineering Structures · doi:10.1016/j.engstruct.2005.12.010 · Cited by 791
Use of selected waste materials in concrete mixes
Batayneh, M., Marie, I., & Asi, I. (2007) · Waste Management · doi:10.1016/j.wasman.2006.07.026 · Cited by 786
Cho, S. H., White, S. R., & Braun, P. V. (2009) · Advanced Materials · doi:10.1002/adma.200802008 · Cited by 784
Measuring the eco-efficiency of cement use
Damineli, B. L., Kemeid, F. M., Aguiar, P. S., & John, V. M. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2010.07.009 · Cited by 776
Kazemian, A., Yuan, X., Cochran, E., & Khoshnevis, B. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.015 · Cited by 774
Performance of concrete made with commercially produced coarse recycled concrete aggregate
Sagoe-Crentsil, K. K., Brown, T., & Taylor, A. H. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00476-2 · Cited by 772
Synthesis and characterization of red mud and rice husk ash-based geopolymer composites
He, J., Jie, Y., Zhang, J., Yu, Y., & Zhang, G. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.11.010 · Cited by 770
An Overview of Utilization of Steel Slag
Yi, H., Xu, G., Cheng, H., Wang, J., Wan, Y., & Chen, H. (2012) · Procedia Environmental Sciences · doi:10.1016/j.proenv.2012.10.108 · Cited by 764
Use of silica gel or polyurethane immobilized bacteria for self-healing concrete
Wang, J., Van Tittelboom, K., De Belie, N., & Verstraete, W. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.06.054 · Cited by 761
Carbon dioxide reduction potential in the global cement industry by 2050
Miller, S. A., John, V. M., Pacca, S. A., & Horvath, A. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.08.026 · Cited by 757
Evaluation of bagasse ash as supplementary cementitious material
Ganesan, K., Rajagopal, K. R., & Thangavel, K. (2007) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2007.03.001 · Cited by 754
Natural Fibre Composites and Their Applications: A Review
Peças, P., Carvalho, H., Salman, H., & Leite, M. (2018) · Journal of Composites Science · doi:10.3390/jcs2040066 · Cited by 750
Nano reinforced cement and concrete composites and new perspective from graphene oxide
Chuah, S., Pan, Z., Sanjayan, J. G., Wang, C. M., & Duan, W. H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.09.040 · Cited by 742
Jiang, C., Fan, K., Wu, F., & Chen, D. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.01.056 · Cited by 731
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Properties of high-volume fly ash concrete incorporating nano-SiO2
Li, G. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2003.11.013 · Cited by 709
Physical and chemical characteristics of wood ash
Etiégni, L., & Campbell, A. G. (1991) · Bioresource Technology · doi:10.1016/0960-8524(91)90207-z · Cited by 704
Plant-based natural fibre reinforced cement composites: A review
Onuaguluchi, O., & Banthia, N. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.02.014 · Cited by 698
Green wall systems: A review of their characteristics
Manso, M., & Castro-Gomes, J. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.203 · Cited by 691
Hasanbeigi, A., Price, L., & Lin, E. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.07.019 · Cited by 686
Energy and greenhouse gas impacts of mining and mineral processing operations
Norgate, T., & Haque, N. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2009.09.020 · Cited by 686
Durability performance of concrete made with fine recycled concrete aggregates
Evangelista, L., & de Brito, J. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.09.005 · Cited by 685
Self-citationCrack healing in concrete using various bio influenced self-healing techniques
Khaliq, W., & Ehsan, M. B. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.11.006 · Cited by 684
Otsuki, N., Miyazato, S.-I., & Yodsudjai, W. (2003) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2003)15:5(443 · Cited by 675
Kou, S.-C., Poon, C.-S., & Agrela, F. (2011) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.05.009 · Cited by 667
Carbon capture and storage using alkaline industrial wastes
Bobicki, E. R., Liu, Q., Xu, Z., & Zeng, H. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.11.002 · Cited by 666
Modelling chloride diffusion in concrete
Thomas, M. D. A., & Bamforth, P. B. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00192-6 · Cited by 665
Properties of concrete containing waste glass
Topçu, İ. B., & Canbaz, M. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2003.07.003 · Cited by 660
Performance characteristics of high-volume Class F fly ash concrete
Siddique, R. (2003) · Cement and Concrete Research · doi:10.1016/j.cemconres.2003.09.002 · Cited by 647
An experimental study on thermal conductivity of concrete
Kim, K.-H., Jeon, S.-E., Kim, J.-K., & Yang, S. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00965-1 · Cited by 637
Bekas, D. G., Tsirka, K., Baltzis, D., & Paipetis, A. S. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.09.057 · Cited by 614
Bamboo as reinforcement in structural concrete elements
Ghavami, K. (2005) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2004.06.002 · Cited by 609
Gartner, E., & Hirao, H. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.012 · Cited by 607
The use of coarse and fine crushed bricks as aggregate in concrete
Debieb, F., & Kenai, S. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2006.12.013 · Cited by 607
Wang, J. Y., Snoeck, D., Van Vlierberghe, S., Verstraete, W., & De Belie, N. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.06.018 · Cited by 601
Recycling of Demolished Concrete and Masonry
Hansen, T. C. (1992) · CRC Press eBooks · doi:10.1201/9781482267075 · Cited by 598
Measurement of tensile bond strength of 3D printed geopolymer mortar
Panda, B., Paul, S. C., Mohamed, N. A. N., Tay, Y. W. D., & Tan, M. J. (2018) · Measurement · doi:10.1016/j.measurement.2017.08.051 · Cited by 592
BRAISSANT, O., DECHO, A. W., DUPRAZ, C., GLUNK, C., PRZEKOP, K. M., & VISSCHER, P. T. (2007) · Geobiology · doi:10.1111/j.1472-4669.2007.00117.x · Cited by 590
Effects of waste PET bottles aggregate on the properties of concrete
Choi, Y.-W., Moon, D.-J., Chung, J.-S., & Cho, S.-K. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.05.014 · Cited by 586
Xie, J., Wang, J., Rao, R., Wang, C., & Fang, C. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.11.067 · Cited by 581
Gartner, E., & Sui, T. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.002 · Cited by 580
Properties of sustainable concrete containing fly ash, slag and recycled concrete aggregate
Berndt, M. L. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.02.011 · Cited by 575
Supplementary Cementitious Materials
Snellings, R., Mertens, G., & Elsen, J. (2012) · Reviews in Mineralogy and Geochemistry · doi:10.2138/rmg.2012.74.6 · Cited by 574
Lawrence, P., Cyr, M., & Ringot, E. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00183-2 · Cited by 570
Applications of using nano material in concrete: A review
Sidek, M. N. M., Hamidah, M. S., & Fadzil, A. M. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.12.005 · Cited by 570
A review of mineral carbonation technology in sequestration of CO2
Olajire, A. A. (2013) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2013.03.013 · Cited by 567
Chen, C., Habert, G., Bouzidi, Y., Jullien, A., & Ventura, A. (2010) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2010.04.001 · Cited by 566
Joseph, P. (1999) · Composites Science and Technology · doi:10.1016/s0266-3538(99)00024-x · Cited by 565
Investigation of coal bottom ash and fly ash in concrete as replacement for sand and cement
Rafieizonooz, M., Mirza, J., Salim, M. R., Hussin, M. W., & Khankhaje, E. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.04.080 · Cited by 561
Rashad, A. M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.12.001 · Cited by 557
Sustainable development in the mining industry: clarifying the corporate perspective
Hilson, G. M., & Murck, B. W. (2000) · Resources Policy · doi:10.1016/s0301-4207(00)00041-6 · Cited by 548
Life cycle energy analysis of fiber-reinforced composites
Song, Y. S., Youn, J. R., & Gutowski, T. G. (2009) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.05.020 · Cited by 548
Ismail, I., Bernal, S. A., Provis, J. L., San Nicolas, R., Brice, D. G., Kilcullen, A. R., Hamdan, S., & van Deventer, J. S. J. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.07.106 · Cited by 544
Alonso, S., & Palomo, A. (2001) · Materials Letters · doi:10.1016/s0167-577x(00)00212-3 · Cited by 542
Kou, S.-C., & Poon, C.-S. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.12.011 · Cited by 537
Diatomaceous earth as a protective vehicle for bacteria applied for self-healing concrete
Wang, J. Y., Belie, N. D., & Verstraete, W. (2011) · Journal of Industrial Microbiology & Biotechnology · doi:10.1007/s10295-011-1037-1 · Cited by 534
Global energy consumption due to friction and wear in the mining industry
Holmberg, K., Kivikytö-Reponen, P., Härkisaari, P., Valtonen, K., & Erdemir, A. (2017) · Tribology International · doi:10.1016/j.triboint.2017.05.010 · Cited by 534
Intumescent Flame-Retardant and Self-Healing Superhydrophobic Coatings on Cotton Fabric
Chen, S., Li, X., Li, Y., & Sun, J. (2015) · ACS Nano · doi:10.1021/acsnano.5b00121 · Cited by 532
Influence of mineral additions on the performance of 100% recycled aggregate concrete
Corinaldesi, V., & Moriconi, G. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.02.004 · Cited by 529
Recycling of PET bottles as fine aggregate in concrete
Frigione, M. (2010) · Waste Management · doi:10.1016/j.wasman.2010.01.030 · Cited by 528
Fang, G., Ho, W. K., Tu, W., & Zhang, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.008 · Cited by 528
Experimental study of bond behaviour between concrete and FRP bars using a pull-out test
Baena, M., Torres, L., Turon, A., & Barris, C. (2009) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2009.07.003 · Cited by 527
Corrosion and electrochemistry of zinc
(1997) · Choice Reviews Online · doi:10.5860/choice.34-5118 · Cited by 525
Science and Technology of Concrete Admixtures
Aïtcin, P.-C., & Flatt, R. J. (2016) · Elsevier eBooks · doi:10.1016/c2015-0-00150-2 · Cited by 525
Use of recycled concrete aggregate in fly-ash concrete
Limbachiya, M., Meddah, M. S., & Ouchagour, Y. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.07.023 · Cited by 523
Recycled Concrete as Aggregate for Structural Concrete Production
Malešev, M., Radonjanin, V., & Marinković, S. (2010) · Sustainability · doi:10.3390/su2051204 · Cited by 523
Engineering properties of inorganic polymer concretes (IPCs)
Sofi, M., van Deventer, J. S. J., Mendis, P. A., & Lukey, G. C. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.10.008 · Cited by 522
Self‐Healing Materials: Fundamentals, Design Strategies, and Applications
Ghosh, S. K. (2008) · Self‐Healing Materials · doi:10.1002/9783527625376.ch1 · Cited by 520
Reusing ceramic wastes in concrete
Pacheco-Torgal, F., & Jalali, S. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.10.023 · Cited by 519
Joseph, P. V., Rabello, M. S., Mattoso, L. H. C., Joseph, K., & Thomas, S. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00080-5 · Cited by 515
Recycling of waste glass as a partial replacement for fine aggregate in concrete
Ismail, Z. Z., & AL-Hashmi, E. A. (2008) · Waste Management · doi:10.1016/j.wasman.2008.08.012 · Cited by 508
Albano, C., Camacho, N., Hernández, M., Matheus, A., & Gutiérrez, A. (2009) · Waste Management · doi:10.1016/j.wasman.2009.05.007 · Cited by 504
Aprianti S, E. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.115 · Cited by 500
Influence of Fly Ash as Cement Replacement on the Properties of Recycled Aggregate Concrete
Kou, S. C., Poon, C. S., & Chan, D. (2007) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2007)19:9(709 · Cited by 494
Characterisation and use of biomass fly ash in cement-based materials
Rajamma, R., Ball, R. J., Tarelho, L. A. C., Allen, G. C., Labrincha, J. A., & Ferreira, V. M. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.07.109 · Cited by 494
Fracture toughness of geopolymeric concretes reinforced with basalt fibers
Dias, D. P., & Thaumaturgo, C. (2005) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2004.02.044 · Cited by 492
Smol, M., Kulczycka, J., Henclik, A., Gorazda, K., & Wzorek, Z. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.051 · Cited by 487
Durability Gap Analysis for Fiber-Reinforced Polymer Composites in Civil Infrastructure
Karbhari, V. M., Chin, J. W., Hunston, D. L., et al. (2003) · Journal of Composites for Construction · doi:10.1061/(asce)1090-0268(2003)7:3(238 · Cited by 486
Practical recycling applications of crushed waste glass in construction materials: A review
Mohajerani, A., Vajna, J., Cheung, T. H. H., Kurmus, H., Arulrajah, A., & Horpibulsuk, S. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.09.005 · Cited by 484
Re-use of waste marble dust in the production of cement and concrete
Aliabdo, A. A., Elmoaty, A. E. M. A., & Auda, E. M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.09.005 · Cited by 483
Development of vegetable fibre–mortar composites of improved durability
Tolêdo Filho, R. D., Ghavami, K., England, G. L., & Scrivener, K. (2003) · Cement and Concrete Composites · doi:10.1016/s0958-9465(02)00018-5 · Cited by 482
Self-healing cementitious materials by the combination of microfibres and superabsorbent polymers
Snoeck, D., Van Tittelboom, K., Steuperaert, S., Dubruel, P., & De Belie, N. (2014) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x12438623 · Cited by 479
A review on concrete surface treatment Part I: Types and mechanisms
Pan, X., Shi, Z., Shi, C., Ling, T.-C., & Li, N. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.12.025 · Cited by 479
Efflorescence control in geopolymer binders based on natural pozzolan
Najafi Kani, E., Allahverdi, A., & Provis, J. L. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.07.007 · Cited by 476
Properties of 3D-printed fiber-reinforced Portland cement paste
Hambach, M., & Volkmer, D. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.02.001 · Cited by 470
Creep and shrinkage of recycled aggregate concrete
Domingo-Cabo, A., Lázaro, C., López-Gayarre, F., Serrano-López, M. A., Serna, P., & Castaño-Tabares, J. O. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.02.018 · Cited by 467
Durability of recycled aggregates concrete: a safe way to sustainable development
Levy, S. M., & Helene, P. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.02.009 · Cited by 466
Celik, K., Meral, C., Petek Gursel, A., Mehta, P. K., Horvath, A., & Monteiro, P. J. M. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.11.003 · Cited by 463
On the mechanical properties of concrete containing waste PET particles
Rahmani, E., Dehestani, M., Beygi, M. H. A., Allahyari, H., & Nikbin, I. M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.06.041 · Cited by 458
Greywater reuse: towards sustainable water management
Al-Jayyousi, O. R. (2003) · Desalination · doi:10.1016/s0011-9164(03)00340-0 · Cited by 457
Alkali-Activated Cements and Concretes
Shi, C., Roy, D. M., & Krivenko, P. V. (2003) · CRC Press eBooks · doi:10.1201/9781482266900 · Cited by 455
Sata, V., Jaturapitakkul, C., & Kiattikomol, K. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2005.09.011 · Cited by 445
Characterising ash of biomass and waste
Tortosa Masiá, A. A., Buhre, B. J. P., Gupta, R. P., & Wall, T. F. (2007) · Fuel Processing Technology · doi:10.1016/j.fuproc.2007.06.011 · Cited by 439
Alexander, M., & Beushausen, H. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.04.018 · Cited by 439
Properties and utilizations of waste tire rubber in concrete: A review
Siddika, A., Mamun, M. A. A., Alyousef, R., Amran, Y. H. M., Aslani, F., & Alabduljabbar, H. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.108 · Cited by 439
Zhao, H., Sun, W., Wu, X., & Gao, B. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.050 · Cited by 433
Durability of FRP rods for concrete structures
Micelli, F., & Nanni, A. (2004) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2004.04.012 · Cited by 432
Chindaprasirt, P., & Rukzon, S. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.06.010 · Cited by 430
Butler, L., West, J. S., & Tighe, S. L. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.06.004 · Cited by 429
Sayadi, A. A., Tapia, J. V., Neitzert, T. R., & Clifton, G. C. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.218 · Cited by 428
Concrete with recycled concrete aggregate and crushed clay bricks
Yang, J., Du, Q., & Bao, Y. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.11.063 · Cited by 427
Life cycle assessment of carbon fiber-reinforced polymer composites
Das, S. (2011) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-011-0264-z · Cited by 426
Development of paving blocks from synergistic use of red mud and fly ash using geopolymerization
Kumar, A., & Kumar, S. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.09.013 · Cited by 425
Silva, R. V., de Brito, J., & Dhir, R. K. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.10.064 · Cited by 424
Self-citationMicrostructural changes caused by carbonation of cement mortar
Johannesson, B., & Utgenannt, P. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00498-7 · Cited by 422
Puertas, F., & Torres-Carrasco, M. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.12.005 · Cited by 420
Use of different forms of waste plastic in concrete – a review
Sharma, R., & Bansal, P. P. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.08.042 · Cited by 419
Jang, J. G., Kim, G. M., Kim, H. J., & Lee, H. K. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.10.017 · Cited by 419
Properties of concrete prepared with waste tyre rubber particles of uniform and varying sizes
Su, H., Yang, J., Ling, T., Ghataora, G. S., & Dirar, S. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.12.022 · Cited by 418
Ergün, A. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.07.002 · Cited by 412
Shape Memory Assisted Self-Healing Coating
Luo, X., & Mather, P. T. (2013) · ACS Macro Letters · doi:10.1021/mz400017x · Cited by 412
Bacteria-based self-healing concrete to increase liquid tightness of cracks
Tziviloglou, E., Wiktor, V., Jonkers, H. M., & Schlangen, E. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.06.080 · Cited by 412
Sulfate reducing bacteria in microbial mats: Changing paradigms, new discoveries
Baumgartner, L. K., Reid, R. P., Dupraz, C., Decho, A. W., Buckley, D. H., Spear, J. R., Przekop, K. M., & Visscher, P. T. (2006) · Sedimentary Geology · doi:10.1016/j.sedgeo.2005.12.008 · Cited by 411
Assessment of recycling process induced damage sensitivity of recycled concrete aggregates
Nagataki, S., Gokce, A., Saeki, T., & Hisada, M. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2003.11.008 · Cited by 411
Liu, M. Y. J., Alengaram, U. J., Jumaat, M. Z., et al. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2013.12.029 · Cited by 411
Development of geopolymer mortar under ambient temperature for in situ applications
Al-Majidi, M. H., Lampropoulos, A., Cundy, A., & Meikle, S. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.085 · Cited by 410
Naqi, A., & Jang, J. G. (2019) · Sustainability · doi:10.3390/su11020537 · Cited by 406
Coatings super-repellent to ultralow surface tension liquids
Pan, S., Guo, R., Björnmalm, M., Richardson, J. J., Li, L., Peng, C., Bertleff-Zieschang, N., Xu, W., Jiang, J., & Caruso, F. (2018) · Nature Materials · doi:10.1038/s41563-018-0178-2 · Cited by 402
Li, W., Huang, Z., Cao, F., Sun, Z., & Shah, S. P. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.05.137 · Cited by 400
Dry, C. (1994) · Smart Materials and Structures · doi:10.1088/0964-1726/3/2/006 · Cited by 400
Applications of fly ash for CO2 capture, utilization, and storage
Dindi, A., Quang, D. V., Vega, L. F., Nashef, E., & Abu-Zahra, M. R. M. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.11.011 · Cited by 399
Treatment of dairy industry wastewater by reverse osmosis for water reuse
Vourch, M., Balannec, B., Chaufer, B., & Dorange, G. (2008) · Desalination · doi:10.1016/j.desal.2007.05.013 · Cited by 397
Benmansour, N., Agoudjil, B., Gherabli, A., Kareche, A., & Boudenne, A. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.05.032 · Cited by 394
Kou, S. C., Lee, G., Poon, C. S., & Lai, W. L. (2009) · Waste Management · doi:10.1016/j.wasman.2008.06.014 · Cited by 392
Shaikh, F. U. A., & Supit, S. W. M. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.07.099 · Cited by 390
Effect of nano-silica on strength and durability of fly ash based geopolymer mortar
Adak, D., Sarkar, M., & Mandal, S. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.07.093 · Cited by 387
Carbonation behaviour of recycled aggregate concrete
Silva, R. V., Neves, R., de Brito, J., & Dhir, R. K. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.04.017 · Cited by 385
Self-citationAn investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete
Akçaözoğlu, S., Atiş, C. D., & Akçaözoğlu, K. (2010) · Waste Management · doi:10.1016/j.wasman.2009.09.033 · Cited by 385
Concrete made with used tyre aggregate: durability-related performance
Bravo, M., & de Brito, J. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.11.066 · Cited by 385
Self-citationPhysical and mechanical properties of durable sisal fiber–cement composites
Silva, F. D. A., Filho, R. D. T., Filho, J. D. A. M., & Fairbairn, E. D. M. R. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.10.030 · Cited by 384
Use of waste glass as sand in mortar: Part I – Fresh, mechanical and durability properties
Tan, K. H., & Du, H. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.08.028 · Cited by 383
Intercalated clay nanocomposites: Morphology, mechanics, and fracture behavior
Zerda, A. S., & Lesser, A. J. (2001) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.1090 · Cited by 381
Effect of waste tyre rubber on mechanical and durability properties of concrete – A review
Sofi, A. (2017) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2017.08.007 · Cited by 381
Alkali-silica reaction in concrete
Hobbs, D. W. (1988) · doi:10.1680/aric.13179 · Cited by 380
Ghosh, A., Ganguly, R., Schutzius, T. M., & Megaridis, C. M. (2014) · Lab Chip · doi:10.1039/c3lc51406d · Cited by 379
Mechanical properties of hemp fibre reinforced cement: Influence of the fibre/matrix interaction
Sedan, D., Pagnoux, C., Smith, A., & Chotard, T. (2008) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2007.05.019 · Cited by 376
A study on carbonation depth prediction for fly ash concrete
Khunthongkeaw, J., Tangtermsirikul, S., & Leelawat, T. (2006) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2005.01.052 · Cited by 376
Cited by
Miller, S. A., Habert, G., Myers, R. J., & Harvey, J. T. (2021) · One Earth · doi:10.1016/j.oneear.2021.09.011 · Cited by 308
Pathways towards sustainable concrete
Coffetti, D., Crotti, E., Gazzaniga, G., Carrara, M., Pastore, T., & Coppola, L. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106718 · Cited by 274
Scope, C., Guenther, E., Schütz, J., Mielecke, T., Mündecke, E., Schultze, K., & Saling, P. (2020) · Civil Engineering Design · doi:10.1002/cend.202000024 · Cited by 22
Metadata
- Authors
- de Brito, J., & Kurda, R.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 281
- Pages
- 123558
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3086090482
- Cited by
- 436
- References
- 878
- FWCI
- 30.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.