The DOI matches its Crossref record; 61 of the 61 references it cites were found in a registry or an index.
Artificial neural network model to predict the compressive strength of eco-friendly geopolymer concrete incorporating silica fume and natural zeolite
Abstract
The growing concern about global climate change and its adverse impacts on societies is putting severe pressure on the construction industry as one of the largest producers of greenhouse gases. Given the environmental issues associated with cement production, Geopolymer Concrete (GPC) has emerged as a sustainable construction material. This research experimentally studied the effect of partially substituting ground granulated blast-furnace slag (GGBS) with silica fume (SF) and natural zeolite (NZ) (by 0–30% with 5% increments) in the GPC activated by sodium hydroxide (NaOH) solution with different concentrations (4, 6 and 8 M) and sodium silicate (water glass) solution on the compressive strength. Obtained results revealed that increasing the NaOH concentration reduced the concrete strength, while adding SF and NZ to the concrete yielded an improvement in the compressive strength. Moreover, this study proposed an Artificial Neural Network (ANN) to predict the compressive strength of pozzolanic GPC based on GGBS (i.e., at the ages of 7, 28, and 90 days). The compressive strength of GGBS-based GPC (i.e., 117 concrete specimens manufactured out of 39 various mixtures) obtained by experimental tests was used to develop the model. The specimen age, NaOH concentration, contents of NZ, SF, and GGBS were considered as inputs variables for developing the ANN model. The predicted results establish the accuracy and high prediction ability of the proposed model. The findings of this study can bring significant benefits for the range of organizations involved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A logical calculus of the ideas immanent in nervous activity
McCulloch, W. S., & Pitts, W. (1943) · The Bulletin of Mathematical Biophysics · doi:10.1007/bf02478259 · Cited by 18,566
Kohonen, T. (1990) · Proceedings of the IEEE · doi:10.1109/5.58325 · Cited by 8,414
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Advances in alternative cementitious binders
Juenger, M. C. G., Winnefeld, F., Provis, J. L., & Ideker, J. H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.012 · Cited by 1,851
Introduction to Machine Learning
Yu, F. R., & He, Y. (2019) · SpringerBriefs in Electrical and Computer Engineering · doi:10.1007/978-3-030-10546-4_1 · Cited by 1,594
Mechanism of geopolymerization and factors influencing its development: a review
Khale, D., & Chaudhary, R. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0401-4 · Cited by 1,463
Geopolymers and geopolymeric materials
Davidovits, J. (1989) · Journal of Thermal Analysis · doi:10.1007/bf01904446 · Cited by 1,148
A review: The comparison between alkali-activated slag (Si + Ca) and metakaolin (Si + Al) cements
Li, C., Sun, H., & Li, L. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.03.020 · Cited by 1,108
GHOSH-DASTIDAR, S., & ADELI, H. (2009) · International Journal of Neural Systems · doi:10.1142/s0129065709002002 · Cited by 1,057
Assessment of CO2 reduction of alkali-activated concrete
Yang, K.-H., Song, J.-K., & Song, K.-I. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.08.001 · Cited by 832
Approximation and Radial-Basis-Function Networks
Park, J., & Sandberg, I. W. (1993) · Neural Computation · doi:10.1162/neco.1993.5.2.305 · Cited by 816
Life-Cycle Assessment and the Environmental Impact of Buildings: A Review
Khasreen, M. M., Banfill, P. F. G., & Menzies, G. F. (2009) · Sustainability · doi:10.3390/su1030674 · Cited by 787
Bebis, G., & Georgiopoulos, M. (1994) · IEEE Potentials · doi:10.1109/45.329294 · Cited by 746
Kabirifar, K., Mojtahedi, M., Wang, C., & Tam, V. W. Y. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121265 · Cited by 695
Lion Optimization Algorithm (LOA): A nature-inspired metaheuristic algorithm
Yazdani, M., & Jolai, F. (2016) · Journal of Computational Design and Engineering · doi:10.1016/j.jcde.2015.06.003 · Cited by 626
Self-citationNaderpour, H., Rafiean, A. H., & Fakharian, P. (2018) · Journal of Building Engineering · doi:10.1016/j.jobe.2018.01.007 · Cited by 603
Durability of alkali-activated binders: A clear advantage over Portland cement or an unproven issue?
Pacheco-Torgal, F., Abdollahnejad, Z., Camões, A. F., Jamshidi, M., & Ding, Y. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.12.017 · Cited by 480
Golafshani, E. M., Behnood, A., & Arashpour, M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117266 · Cited by 478
Alkali activation of Australian slag cements
Bakharev, T., Sanjayan, J. G., & Cheng, Y.-B. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00170-7 · Cited by 474
The basic ideas in neural networks
Rumelhart, D. E., Widrow, B., & Lehr, M. A. (1994) · Communications of the ACM · doi:10.1145/175247.175256 · Cited by 458
Red deer algorithm (RDA): a new nature-inspired meta-heuristic
Fathollahi-Fard, A. M., Hajiaghaei-Keshteli, M., & Tavakkoli-Moghaddam, R. (2020) · Soft Computing · doi:10.1007/s00500-020-04812-z · Cited by 443
Use of natural zeolite as a supplementary cementitious material
Ahmadi, B., & Shekarchi, M. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.10.006 · Cited by 442
Rashad, A. M. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.07.074 · Cited by 387
Najimi, M., Sobhani, J., Ahmadi, B., & Shekarchi, M. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.04.038 · Cited by 361
Behnood, A., & Golafshani, E. M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.065 · Cited by 351
Let a biogeography-based optimizer train your Multi-Layer Perceptron
Mirjalili, S., Mirjalili, S. M., & Lewis, A. (2014) · Information Sciences · doi:10.1016/j.ins.2014.01.038 · Cited by 329
Natural zeolite utilisation in pollution control: A review of applications to metals' effluents
Kesraoui‐Ouki, S., Cheeseman, C. R., & Perry, R. (1994) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.280590202 · Cited by 291
Toghroli, A., Mehrabi, P., Shariati, M., Trung, N. T., Jahandari, S., & Rasekh, H. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118997 · Cited by 287
The Social Engineering Optimizer (SEO)
Fathollahi-Fard, A. M., Hajiaghaei-Keshteli, M., & Tavakkoli-Moghaddam, R. (2018) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2018.04.009 · Cited by 279
Azimi-Pour, M., Eskandari-Naddaf, H., & Pakzad, A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117021 · Cited by 235
Machine learning study of the mechanical properties of concretes containing waste foundry sand
Behnood, A., & Golafshani, E. M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118152 · Cited by 202
1. Introduction of machine learning
(2020) · Machine Learning and Visual Perception · doi:10.1515/9783110595567-002 · Cited by 202
A green home health care supply chain: New modified simulated annealing algorithms
Fathollahi‐Fard, A. M., Govindan, K., Hajiaghaei–Keshteli, M., & Ahmadi, A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118200 · Cited by 197
Nematzadeh, M., Shahmansouri, A. A., & Fakoor, M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119057 · Cited by 179
Self-citationFathollahi-Fard, A. M., Ahmadi, A., Goodarzian, F., & Cheikhrouhou, N. (2020) · Applied Soft Computing · doi:10.1016/j.asoc.2020.106385 · Cited by 175
Collins, F., & Sanjayan, J. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00237-3 · Cited by 165
Shahmansouri, A. A., Bengar, H. A., & Jahani, E. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.116883 · Cited by 157
Self-citationA bi-objective green home health care routing problem
Fathollahi‐Fard, A. M., Hajiaghaei–Keshteli, M., & Tavakkoli-Moghaddam, R. R. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.258 · Cited by 152
Naderpour, H., Nagai, K., Fakharian, P., & Haji, M. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.02.048 · Cited by 135
Durability of alkali activated cement produced from kaolinitic clay
Al-Slaty, F., Khoury, H. N., Rahier, H., & Wastiels, J. (2014) · Applied Clay Science · doi:10.1016/j.clay.2014.11.037 · Cited by 132
Ashrafian, A., Amiri, M. J. T., Rezaie-Balf, M., Ozbakkaloglu, T., & Lotfi-Omran, O. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.047 · Cited by 127
Yousef, R. I., El-Eswed, B. I., Alshaaer, M., Khalili, F. I., & Khoury, H. N. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.10.004 · Cited by 116
Pezeshki, Z., & Mazinani, S. M. (2018) · Artificial Intelligence Review · doi:10.1007/s10462-018-9630-6 · Cited by 114
Automatic regression methods for formulation of elastic modulus of recycled aggregate concrete
Golafshani, E. M., & Behnood, A. (2017) · Applied Soft Computing · doi:10.1016/j.asoc.2017.12.030 · Cited by 109
AzariJafari, H., Amiri, M. J. T., Ashrafian, A., Rasekh, H., Barforooshi, M. J., & Berenjian, J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.054 · Cited by 109
Sadowski, Ł., Piechówka-Mielnik, M., Widziszowski, T., Gardynik, A., & Mackiewicz, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.12.059 · Cited by 106
Kow, P.-Y., Wang, Y.-S., Zhou, Y., Kao, I.-F., Issermann, M., Chang, L., & Chang, F. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121285 · Cited by 104
Capacity planning and reconfiguration for disaster-resilient health infrastructure
Aghapour, A. H., Yazdani, M., Jolai, F., & Mojtahedi, M. (2019) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.100853 · Cited by 101
Self-citationA Novel Machine Learning Approach Combined with Optimization Models for Eco-efficiency Evaluation
Mirmozaffari, M., Yazdani, M., Boskabadi, A., Dolatsara, H. A., Kabirifar, K., & Golilarz, N. A. (2020) · Applied Sciences · doi:10.3390/app10155210 · Cited by 100
Self-citationMahdinia, S., Eskandari‐Naddaf, H., & Shadnia, R. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.11.265 · Cited by 91
Recycling zeolitic tuff and marble waste in the production of eco-friendly geopolymer concretes
Tekin, İ., Gençel, O., Gholampour, A., Ören, O. H., Köksal, F., & Ozbakkaloglu, T. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.122298 · Cited by 86
Kooshkaki, A., & Eskandari‐Naddaf, H. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.03.243 · Cited by 83
Emamian, S. A., & Eskandari‐Naddaf, H. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.05.092 · Cited by 74
Is the Australian construction industry prepared for climate change?
Hürlimann, A., Warren‐Myers, G., & Browne, G. R. (2019) · Building and Environment · doi:10.1016/j.buildenv.2019.02.008 · Cited by 73
Yazdani, M., Mojtahedi, M., & Loosemore, M. (2020) · Journal of Computational Design and Engineering · doi:10.1093/jcde/qwaa017 · Cited by 63
Self-citationA neural network approach to predicting the net costs associated with BIM adoption
Hong, Y., Hammad, A. W. A., Akbarnezhad, A., & Arashpour, M. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103306 · Cited by 62
Ghasemi, M., Rasekh, H., Berenjian, J., & AzariJafari, H. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.06.174 · Cited by 48
Emamian, S. A., & Eskandari‐Naddaf, H. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118027 · Cited by 45
Natural Zeolites in Energy Applications
Özaydın, S., Koçar, G., & Hepbaşlı, A. (2006) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567240500400804 · Cited by 43
A proposed novel approach for torsional strength prediction of RC beams
Ilkhani, M. H., Naderpour, H., & Kheyroddin, A. (2019) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.100810 · Cited by 22
MODELLING OF CONCRETE COMPRESSIVE STRENGTH ADMIXED WITH GGBFS USING GENE EXPRESSION PROGRAMMING
Akin, O. O., & Abejide, O. S. (2019) · DOAJ (DOAJ: Directory of Open Access Journals) · doi:10.22115/scce.2019.178214.1103 · Cited by 9
Cited by
Machine Learning for Structural Engineering: A State-of-the-Art Review
Thai, H.-T. (2022) · Structures · doi:10.1016/j.istruc.2022.02.003 · Cited by 748
Potential applications of geopolymer concrete in construction: A review
Almutairi, A. L., Tayeh, B. A., Adesina, A., Isleem, H. F., & Zeyad, A. M. (2021) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2021.e00733 · Cited by 481
Mohtasham Moein, M., Saradar, A., Rahmati, K., Ghasemzadeh Mousavinejad, S. H., Bristow, J., Aramali, V., & Karakouzian, M. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.105444 · Cited by 391
Yazdani, M., Kabirifar, K., Frimpong, B. E., Shariati, M., Mirmozaffari, M., & Boskabadi, A. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124138 · Cited by 300
Self-citationFarooq, F., Nasir Amin, M., Khan, K., Rehan Sadiq, M., Faisal Javed, M. F., Aslam, F., & Alyousef, R. (2020) · Applied Sciences · doi:10.3390/app10207330 · Cited by 279
Metadata
- Authors
- Shahmansouri, A. A., Yazdani, M., Ghanbari, S., Akbarzadeh Bengar, H., Jafari, A., & Farrokh Ghatte, H.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 279
- Pages
- 123697
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3080952128
- Cited by
- 353
- References
- 61
- FWCI
- 27.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.