The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Life cycle greenhouse gas emissions and energy use of polylactic acid, bio-derived polyethylene, and fossil-derived polyethylene
Open accessAbstract
Abstract Bioplastics recently have become an attractive, viable, and popular alternative to conventional petroleum-based plastics, with the hope that replacing fossil-derived plastics with renewable alternatives will reduce greenhouse gas (GHG) emissions and fossil energy consumption (FEC). The bioplastic industry is encouraging creative designs and enhanced properties such as biodegradability, which is considered a sustainable solution for waste plastic management. However, biodegradability also means that carbon in the product is emitted to the atmosphere as GHG emissions. In this paper, a life cycle analysis (LCA) of biodegradable polylactic acid (PLA) and bio-polyethylene (bio-PE) plastics was conducted to understand the environmental effects of these bioplastics from feedstock production to product end-of-life (EOL). In particular, emissions from biodegradability (EOL emissions) are accounted for. The results were compared to those of conventional fossil-based plastics such as high-density polyethylene (HDPE) and low-density polyethylene (LDPE). Results showed that the lowest GHG emissions (−1.0 and 1.7 kg CO2e per kg for bio-PE and PLA with no biodegradation, respectively) and FEC (29 and 46 MJ per kg of bio-PE and PLA, respectively) were achieved with bio-derived plastics, particularly bio-PE plastic. However, despite the benefits of biogenic carbon uptake, when landfill and composting emissions were considered for the PLA pathway, the life cycle emissions of PLA increase significantly, from 16% to 163% depending on the biodegradation condition, compared to the case where there is no degradation in the landfill. This study also contributed to understand the effects on the GHG emissions of biodegradability in landfill and composting scenarios, regional electricity mix, and plastics manufacturing technologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Plastic waste inputs from land into the ocean
Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A., Narayan, R., & Law, K. L. (2015) · Science · doi:10.1126/science.1260352 · Cited by 13,163
Watson, R., Albritton, D. L., Barker, T., Baskmakov, I., Canziani, O. F., Christ, R., Ulrich Cubasch, B., Davidson, O., Gitay, H., Griggs, D., et al. (2001) · Cited by 3,473
An overview of the recent developments in polylactide (PLA) research
Madhavan Nampoothiri, K., Nair, N. R., & John, R. P. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.092 · Cited by 2,448
Biodegradable polymers for food packaging: a review
Siracusa, V., Rocculi, P., Romani, S., & Rosa, M. D. (2008) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2008.07.003 · Cited by 2,126
Evidence that the Great Pacific Garbage Patch is rapidly accumulating plastic
Lebreton, L., Slat, B., Ferrari, F., Sainte-Rose, B., Aitken, J., Marthouse, R., Hajbane, S., Cunsolo, S., Schwarz, A., Levivier, A., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-22939-w · Cited by 1,839
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production
Vink, E. T. H., Rábago, K. R., Glassner, D. A., & Gruber, P. R. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00372-5 · Cited by 1,092
Sustainability assessments of bio-based polymers
Hottle, T. A., Bilec, M. M., & Landis, A. E. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.06.016 · Cited by 525
Present and future development in plastics from biomass
Shen, L., Worrell, E., & Patel, M. (2010) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.189 · Cited by 409
Sensitization of renal carcinoma cells to TRAIL-induced apoptosis by rocaglamide and analogs
Nalli, A. D., Brown, L. E., Thomas, C. L., Sayers, T. J., Porco, J. A., & Henrich, C. J. (2018) · Scientific Reports · doi:10.1038/s41598-018-35908-0 · Cited by 295
Lee, U., Han, J., & Wang, M. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.08.016 · Cited by 286
Self-citationBiodegradation of polylactide in aerobic and anaerobic thermophilic conditions
Itävaara, M., Karjomaa, S., & Selin, J.-F. (2002) · Chemosphere · doi:10.1016/s0045-6535(01)00163-1 · Cited by 269
Life Cycle Inventory and Impact Assessment Data for 2014 Ingeo ™ Polylactide Production
Vink, E. T. H., & Davies, S. (2015) · Industrial Biotechnology · doi:10.1089/ind.2015.0003 · Cited by 256
Biopolymer production and end of life comparisons using life cycle assessment
Hottle, T. A., Bilec, M. M., & Landis, A. E. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.03.002 · Cited by 255
Henton, D., Gruber, P., Lunt, J., & Randall, J. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch16 · Cited by 253
Life cycle assessment of the manufacture of lactide and PLA biopolymers from sugarcane in Thailand
Groot, W. J., & Borén, T. (2010) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-010-0225-y · Cited by 249
Kinetics and Time−Temperature Equivalence of Polymer Degradation
Lyu, Schley, J., Loy, B., Lind, D., Hobot, C., Sparer, R., & Untereker, D. (2007) · Biomacromolecules · doi:10.1021/bm070313n · Cited by 237
Vink, E. T. H., Glassner, D. A., Kolstad, J. J., Wooley, R. J., & O’Connor, R. P. (2007) · Industrial Biotechnology · doi:10.1089/ind.2007.3.058 · Cited by 215
Life cycle impact assessment of bio-based plastics from sugarcane ethanol
Tsiropoulos, I., Faaij, A. P. C., Lundquist, L., Schenker, U., Briois, J. F., & Patel, M. K. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.11.071 · Cited by 213
Assessment of anaerobic degradation of Ingeo™ polylactides under accelerated landfill conditions
Kolstad, J. J., Vink, E. T. H., De Wilde, B., & Debeer, L. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.04.003 · Cited by 197
Life cycle assessment of polylactic acid and polyethylene terephthalate bottles for drinking water
Gironi, F., & Piemonte, V. (2011) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.10490 · Cited by 184
Benavides, P. T., Dunn, J. B., Han, J., Biddy, M., & Markham, J. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00750 · Cited by 161
Self-citationBioplastic Wastes: The Best Final Disposition for Energy Saving
Piemonte, V. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0343-z · Cited by 150
Greenhouse gas mitigation for U.S. plastics production: energy first, feedstocks later
Posen, I. D., Jaramillo, P., Landis, A. E., & Griffin, W. M. (2017) · Environmental Research Letters · doi:10.1088/1748-9326/aa60a7 · Cited by 145
Adom, F., Dunn, J. B., Han, J., & Sather, N. (2014) · Environmental Science & Technology · doi:10.1021/es503766e · Cited by 135
Why a 100-Year Time Horizon should be used for GlobalWarming Mitigation Calculations
Fearnside, P. M. (2002) · Mitigation and Adaptation Strategies for Global Change · doi:10.1023/a:1015885027530 · Cited by 91
The eco-profiles for current and near-future NatureWorks ® polylactide (PLA) production
Vink, E. T. H., Glassner, D. A., & Kolstad, J. J. (2007) · Cited by 80
Life-Cycle Assumptions of Landfilled Polylactic Acid Underpredict Methane Generation
Krause, M. J., & Townsend, T. G. (2016) · Environmental Science & Technology Letters · doi:10.1021/acs.estlett.6b00068 · Cited by 59
Canter, C. E., Dunn, J. B., Han, J., Wang, Z., & Wang, M. (2015) · BioEnergy Research · doi:10.1007/s12155-015-9664-4 · Cited by 57
Biobased Economy and Climate Change—Important Links, Pitfalls, and Opportunities
Carus, M. (2017) · Industrial Biotechnology · doi:10.1089/ind.2017.29073.mca · Cited by 55
Guo, Q., & Crittenden, J. C. (2011) · IEEE International Symposium on Sustainable Systems and Technology · doi:10.1109/issst.2011.5936897 · Cited by 17
Drumright, R. E., Gruber, P. R., & Henton, D. E. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23<1841::aid-adma1841>3.0.co;2-e
Cited by
Bishop, G., Styles, D., & Lens, P. N. L. (2021) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2021.105451 · Cited by 401
Dokl, M., Copot, A., Krajnc, D., Fan, Y. V., Vujanović, A., Aviso, K. B., Tan, R. R., Kravanja, Z., & Čuček, L. (2024) · Sustainable Production and Consumption · doi:10.1016/j.spc.2024.09.025 · Cited by 407
(Micro)plastics and the UN Sustainable Development Goals
Walker, T. R. (2021) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2021.100497 · Cited by 322
Sustainable bioplastics derived from renewable natural resources for food packaging
Zhao, X., Wang, Y., Chen, X., Yu, X., Li, W., Zhang, S., Meng, X., Zhao, Z.-M., Dong, T., Anderson, A., et al. (2023) · Matter · doi:10.1016/j.matt.2022.11.006 · Cited by 303
The Life Cycle Assessment for Polylactic Acid (PLA) to Make It a Low-Carbon Material
Rezvani Ghomi, E. R., Khosravi, F., Saedi Ardahaei, A. S., Dai, Y., Neisiany, R. E., Foroughi, F., Wu, M., Das, O., & Ramakrishna, S. (2021) · Polymers · doi:10.3390/polym13111854 · Cited by 295
Metadata
- Authors
- Benavides, P. T., Lee, U., & Zarè-Mehrjerdi, O.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 277
- Pages
- 124010
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3082563038
- Cited by
- 274
- References
- 33
- FWCI
- 8.05
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.