Development of Cleaner One-part geopolymer from lithium slag
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
In this study, lithium slag waste was utilized for the development of eco-friendly ambient cured one-part geopolymer. Lithium slag and blast furnace slag were employed as alumino-silicate precursors and anhydrous sodium silicate as alkaline activator. Fresh properties were assessed using setting time and flowability tests, while compressive strength, flexure strength, water absorption and drying shrinkage tests were performed to evaluate hardened properties of newly developed geopolymer mix. X-ray Diffraction analysis (XRD), Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy examination (SEM) were performed to evaluate the chemical functional groups and microstructure of the mix. The environmental impact analysis was determined through measurement of carbon dioxide equivalent (CO2-e) of constituents. The experimental investigation revealed that blast furnace slag addition in lithium slag based geopolymers improved its reactivity and hardening was achieved at room temperature. The 57 MPa compressive strength was achieved, which is comparable with other one-part geopolymers prepared using similar precursors. The improvement in mechanical strength can be attributed to enhanced geopolymerization reaction and improvement in gel structure as observed through microstructural testing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Meshram, P., Pandey, B. D., & Mankhand, T. R. (2014) · Hydrometallurgy · doi:10.1016/j.hydromet.2014.10.012 · Cited by 982
Metadata
- Authors
- Ali Shah, S. F., Chen, B., Ahmad, M. R., & Haque, M. A.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 291
- Pages
- 125241
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3109217803
- Cited by
- 168
- References
- 2
- FWCI
- 8.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Development of Cleaner One-part geopolymer from lithium slag. https://app.cochat.ai/papers/10.1016/j.jclepro.2020.125241
- The paper
- Ali Shah, S. F., Chen, B., Ahmad, M. R., & Haque, M. A. (2021). Development of Cleaner One-part geopolymer from lithium slag. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2020.125241
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.