The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Acoustic emission method for defect detection and identification in carbon steel welded joints
Open accessAbstract
Detecting welding defects in industrial equipment (welded joints and built-up structures) is a key aspect in evaluating the probability of failure in different situations. Acoustic emission (AE) is an effective non-destructive detecting technique, and can be a promising application for welding defect detection. This work presents a systematic experimental investigation on using AE technique for detecting and classifying different weld defects in carbon steel joint material. Four certified carbon steel samples were used in this study. A defect free control sample was used as the reference and three samples with induced defects, namely slag, porosity and crack. A pencil lead break (PLB) test was used to generate simulated AE sources on one side of the joint whereas the AE sensor was mounted on the other side to capture AE signals. A total of four experimental arrangements were used to investigate the effect of propagating distance (sensor to source distance) on the ability of AE to detect and identify defects in welds. For each of these arrangements, AE features such as peak amplitude, rise time, decay time, duration, and count numbers along with statistical features such as AE energy, root mean square (RMS) were extracted and analysed. Also, frequency analysis using FFT and wavelet transform were investigated for each weld test specimen for all arrangements. The results show that AE energy, peak amplitude and RMS value can be used to automatically detect and identify the presence of a defect in carbon steel welds. It is concluded that AE has a considerable potential in use in welding inspection to assess the overall structural health and identify defects that can significantly reduce the strength and reliability of welded material and consequently reduce the risk of component's failure.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“However, the above traditional machine learning-based defect detection methods have low detection accuracy and cannot meet the needs of industry.”
From A deep learning model for steel surface defect detection (2024) · cites this paper as [6]
Citations
Cites
Defect identification in friction stir welding using discrete wavelet analysis
Kumar, U., Yadav, I., Kumari, S., Kumari, K., Ranjan, N. S., Kesharwani, R. K., Jain, R., Kumar, S., Pal, S., Chakravarty, D., et al. (2015) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2015.02.001 · Cited by 76
Indentation testing and its acoustic emission response: applications and emerging trends
Faisal, N. H., Ahmed, R., & Reuben, R. L. (2011) · International Materials Reviews · doi:10.1179/1743280410y.0000000004 · Cited by 70
Self-citationAcoustic emission detection of fatigue damage in cruciform welded joints
Yu, J., Ziehl, P. H., Matta, F., & Pollock, A. A. (2013) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2013.03.017 · Cited by 55
Screening for Welding Defects Using Acoustic Emission Technique
Aboali, A., El-Shaib, M. N., Sharara, A., & Shehadeh, M. (2014) · Advanced materials research · doi:10.4028/www.scientific.net/amr.1025-1026.7 · Cited by 13
Self-citationEvaluation on defect in the weld of stainless steel materials using nondestructive technique
Lee, J. K., Bae, D. S., Lee, S. P., & Lee, J. H. (2014) · Fusion Engineering and Design · doi:10.1016/j.fusengdes.2013.12.026 · Cited by 9
Acoustic Emission Studies on Weld Bead Defects in Nuclear Grade SS 316L Materials
Ranganayakulu, S. V., Shiva Raju, J., Kuchedludu, A., & Ramesh Kumar, B. (2014) · Open Journal of Acoustics · doi:10.4236/oja.2014.43012 · Cited by 6
Halim, Z. A., Jamaludin, N., Syarif, J., & Yahya, S. Y. S. (2015) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-015-0328-2 · Cited by 4
Cited by
Yang, J., Li, S., Wang, Z., Dong, H., Wang, J., & Tang, S. (2020) · Materials · doi:10.3390/ma13245755 · Cited by 488
“Positive detection results can be obtained at frequencies of 100 to 200 kHz and 300 to 400 kHz [106].”
BackgroundMethodInfluentialA review on wire arc additive manufacturing: Monitoring, control and a framework of automated system
Xia, C., Pan, Z., Polden, J., Li, H., Xu, Y., Chen, S., & Zhang, Y. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.08.008 · Cited by 460
Shaloo, M., Schnall, M., Klein, T., Huber, N. W., & Reitinger, B. (2022) · Materials · doi:10.3390/ma15103697 · Cited by 147
A deep learning model for steel surface defect detection
Li, Z., Wei, X., Hassaballah, M., Li, Y., & Jiang, X. (2024) · Complex & Intelligent Systems · doi:10.1007/s40747-023-01180-7 · Cited by 122
Machine learning for ultrasonic nondestructive examination of welding defects: A systematic review
Sun, H., Ramuhalli, P., & Jacob, R. E. (2022) · Ultrasonics · doi:10.1016/j.ultras.2022.106854 · Cited by 143
Kong, X., Wang, E., Li, S., Lin, H., Xiao, P., & Zhang, K. (2019) · Fractals · doi:10.1142/s0218348x19500725 · Cited by 98
Application of Artificial Intelligence in Marine Corrosion Prediction and Detection
Imran, M. M. H., Jamaludin, S., Ayob, A. F. M., Ali, A. A. I. M., Ahmad, S. Z. A. S., Akhbar, M. F. A., Suhrab, M. I. R., Zainal, N., Norzeli, S. M., & Mohamed, S. B. (2023) · Journal of Marine Science and Engineering · doi:10.3390/jmse11020256 · Cited by 94
Sheikh, M. F., Kamal, K., Rafique, F., Sabir, S., Zaheer, H., & Khan, K. A. (2021) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2021.03.024 · Cited by 78
Lin, Z., Sun, C., Liu, W., Fan, E., Zhang, G., Tan, X., Shen, Z., Qiu, J. L., & Yang, J. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106366 · Cited by 74
Ma, G., & Du, Q. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118860 · Cited by 66
Guo, Y., Zhang, Y., Pan, Z. S., & Zhou, W. (2024) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2024.07.060 · Cited by 60
Say, D., Zidi, S., Qaisar, S. M., & Krichen, M. (2023) · Sensors · doi:10.3390/s23146422 · Cited by 58
“The AE [6] control technique is employed to identify and categorize the diverse weld flaws inside carbon steel.”
MethodZhou, Y., Qian, X., Birnie, A., & Zhao, X. (2018) · International Journal of Pressure Vessels and Piping · doi:10.1016/j.ijpvp.2018.09.006 · Cited by 41
Liu, S., Jia, K., Wan, H., Ding, L., Xu, X., Cheng, L., Zhang, S.-Y., Yan, X., Lu, M., Ma, G., et al. (2021) · Optics & Laser Technology · doi:10.1016/j.optlastec.2021.107543 · Cited by 39
Failure Detection Methods for Pipeline Networks: From Acoustic Sensing to Cyber-Physical Systems
Wong, B., & McCann, J. A. (2021) · Sensors · doi:10.3390/s21154959 · Cited by 38
“Page 28–37, Year 2017 with permission from Elsevier [1].”
BackgroundMethodInfluentialWelding quality detection of metro train body based on ABC mask R-CNN
He, D., Ma, R., Jin, Z., Ren, R., He, S., Xiang, Z., Chen, Y., & Xiang, W. (2023) · Measurement · doi:10.1016/j.measurement.2023.112969 · Cited by 43
Interface monitoring of steel-concrete-steel sandwich structures using piezoelectric transducers
Yan, J., Zhou, W., Zhang, X., & Lin, Y. (2019) · Nuclear Engineering and Technology · doi:10.1016/j.net.2019.01.013 · Cited by 32
Welding defect detection based on phased array images and two-stage segmentation strategy
Chen, Y., He, D., He, S., Jin, Z., Miao, J., Shan, S., & Chen, Y. (2024) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.102879 · Cited by 34
Li, Y., & Xu, F. (2021) · Structural Health Monitoring · doi:10.1177/14759217211008969 · Cited by 27
He, D., Chen, J., Chen, Y., Miao, J., Deng, J., Chen, J., & Liu, J. (2020) · Measurement · doi:10.1016/j.measurement.2020.108269 · Cited by 26
Yusof, M. F. M., Ishak, M., & Ghazali, M. F. (2021) · JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES · doi:10.15282/jmes.15.4.2021.03.0669 · Cited by 26
“Droubi et al 2017 [82] Butt Weld Carbon Steel Not Described N/A 1.”
BackgroundInfluentialDetection of Friction Stir Welding Defects of AA1060 Aluminum Alloy Using Specific Damping Capacity
Abushanab, W. S., & Moustafa, E. B. (2018) · Materials · doi:10.3390/ma11122437 · Cited by 22
Zhou, W., Du, Y., Wang, S.-D., Liu, Y., Ma, L., & Liu, J. (2022) · Nondestructive Testing And Evaluation · doi:10.1080/10589759.2022.2094377 · Cited by 22
“The WT can be used to realise the time-domain analysis of typical AE signals [16,40].”
MethodHe, K., & Li, X. (2019) · IEEE Access · doi:10.1109/access.2019.2935117 · Cited by 22
“main processing methods for non-stationary signal [9]–[12].”
He, K., Xia, Z., Si, Y., Liang, J., Yong, J., & Shi, W. (2021) · Measurement · doi:10.1016/j.measurement.2021.110427 · Cited by 20
Sun, F., Xiao, B. L., & Zhang, Y. (2021) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2021.106860 · Cited by 15
Siddiqui, M. M. U. Z., & Tabassum, A. (2024) · Progress in Additive Manufacturing · doi:10.1007/s40964-024-00816-5 · Cited by 25
Novel Signal Denoising Approach for Acoustic Leak Detection
Wu, H., Chen, Y., Lin, W., & Wang, F. (2018) · Journal of Pipeline Systems Engineering and Practice · doi:10.1061/(asce)ps.1949-1204.0000331 · Cited by 13
Kannaiyan, S., Seeman, M., Thirumalaikkannan, D. K., Visvalingam, B., & Bellamkonda, P. N. (2024) · Welding International · doi:10.1080/09507116.2024.2376187 · Cited by 12
“Suresha et al. [27] explained the applicability of AE in the analysis of FSW joints, stating that the AE technique helps detect defect growth in the weld joint in real-time.”
Research Progress of Acoustic Monitoring Technology in Welding and Additive Manufacturing Processes
Zhu, Q., Huang, Z., & Li, H. (2026) · Micromachines · doi:10.3390/mi17020246 · Cited by 11
Monitoring of weld damage based on deep learning and acoustic emission methods
Ma, Y., Liu, M., Yang, L., Fan, J., & Tsangouri, E. (2025) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2025.109583 · Cited by 14
A Novel Ensemble Model on Defects Identification in Aero-Engine Blade
Jiao, Y., Li, Z., Zhu, J., Xue, B., & Zhang, B. (2021) · Processes · doi:10.3390/pr9060992 · Cited by 11
“Nevertheless, it is still tough for the inexperienced to differentiate defect from normal and for the skilled to distinguish different defect types [8,9].”
BackgroundChernov, A. V., Savvas, I. Κ., Alexandrov, A. A., Kartashov, O. O., Polyanichenko, D. S., Butakova, M. A., & Soldatov, A. V. (2022) · Sensors · doi:10.3390/s22218554 · Cited by 13
“Thus, the time-frequency domain analysis and the most practical wavelet techniques for the detection of nonstationary components that are present in the AE signal can be successfully applied [32].”
BackgroundHaneef, T. K., Chakraborty, G., Rejeesh, R., Mukhopadhyay, C. K., & Albert, S. K. (2021) · Nondestructive Testing And Evaluation · doi:10.1080/10589759.2021.1889547 · Cited by 10
Xu, Z., Sampath, S., Wang, X. J., Dong, H., Liu, Y., Wang, Y., Zhang, H., Zhang, L., Tham, J., Liu, Z., et al. (2025) · Measurement · doi:10.1016/j.measurement.2025.120075 · Cited by 11
Steel Defect Classification Using Machine Learning
Arshad, S. R., Obaid, I., Gull, R., & Shahzad, M. (2022) · International Conference on Ubiquitous Information Management and Communication (IMCOM) · doi:10.1109/imcom53663.2022.9721728 · Cited by 11
Banerjee, A., & Mukherjee, A. (2023) · International Journal of Steel Structures · doi:10.1007/s13296-023-00727-1 · Cited by 8
“In (Droubi et al., 2017), the authors performed a systematic experiment to detect and classify various weld defects in carbon steel joint material.”
BackgroundWelding Image Defect Detection Based on Yolov5
Guo, J. J., Dong, L., & Xu, H. (2024) · International Conference on Neural Networks, Information and Communication Engineering (NNICE) · doi:10.1109/nnice61279.2024.10498851 · Cited by 7
“Droubi et al. [10] used acoustic emission energy, peak amplitude and root mean square value to automatically detect and identify defects in carbon steel welded joints, reducing the risk of component failure.”
BackgroundKong, X., Li, X., Liu, T., He, D., Zhang, Z., & Muhammad, A. (2026) · Physics and Chemistry of the Earth Parts A/B/C · doi:10.1016/j.pce.2026.104436 · Cited by 6
Machine learning model of acoustic signatures: Towards digitalised thermal spray manufacturing
Viswanathan, V., McCloskey, A., Mathur, R., Nguyen, D. T., Faisal, N. H., Prathuru, A. K., Llavori, I., Murphy, A., Tiwari, A., Matthews, A., et al. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.111030 · Cited by 6
Self-citationDeep learning for automated defect recognition in tungsten inert gas welds of stainless steel 304
Nohwal, A., Patel, N. N., Aravindan, S., & Jha, S. (2025) · Measurement · doi:10.1016/j.measurement.2025.117850 · Cited by 6
Prathuru, A. K., Faisal, N. H., Steel, J. A., & Jihan, S. (2022) · Journal of Nondestructive Evaluation · doi:10.1007/s10921-022-00898-7 · Cited by 6
Self-citationChen, J., Xing, B., Zhang, H., Zhang, Z., & Zeng, K. (2024) · Nondestructive Testing And Evaluation · doi:10.1080/10589759.2024.2332448 · Cited by 6
Zhang, B., Liu, F., Liu, C. X., Li, J., Zhang, B., Zhou, Q., Han, X., & Zhao, Y. (2017) · AIP conference proceedings · doi:10.1063/1.5005284 · Cited by 6
Bakhri, S., Sumarno, E. E., Himawan, R., Akbar, T., Subekti, M., & Sunaryo, G. R. (2018) · Journal of Physics Conference Series · doi:10.1088/1742-6596/962/1/012064 · Cited by 5
Yang, Y., Wang, Y., & Li, K. (2020) · Advances in Structural Engineering · doi:10.1177/1369433220950615 · Cited by 5
“Based on PLB tests, Droubi et al. (2017) detected and classified different weld defects in carbon steel materials, and Qiu et al. (2020) discussed the propagation characteristics of AE signals in an AC-16 asphalt mixture.”
MethodYang, Y., Wang, Y., & Li, K. (2020) · International Journal of Steel Structures · doi:10.1007/s13296-020-00423-4 · Cited by 5
Weili, Weiping, M., Pan-Qi, Wen-jiao, D., Yuan, X., & Yin, X. (2018) · AIP conference proceedings · doi:10.1063/1.5031666 · Cited by 4
Weld acoustic emission inspection of structural elements embedded in concrete
Carrión-Viramontes, F. J., Hernandez-Figueroa, J. A., Machorro-López, J. M., Quintana-Rodriguez, J. A., Crespo-Sánchez, S. E., Martinez-Trujano, L. A., & Gasca-Zamora, H. M. (2022) · Science Progress · doi:10.1177/00368504221075482 · Cited by 4
“More recent studies focused on using AE for early defect detection of both, structures,(12) and welded joints.(13) Furthermore, AE along with ultrasonic techniques are used to monitor crack initiation and growth.”
MethodGrazion, S. V., Spiryagin, V., Ерофеев, М., Кравченко, И. Н., Kuznetsov, Y. А., Mukomela, M. V., Величко, С. А., Ašonja, A., & Калашнікова, Л. (2022) · Applied Engineering Letters Journal of Engineering and Applied Sciences · doi:10.18485/aeletters.2022.7.2.1 · Cited by 4
Multi-object droplet tracking for high-frame-rate video analysis in wire-arc welding processes
Shi, F., & Jin, H. (2026) · Expert Systems with Applications · doi:10.1016/j.eswa.2026.131604 · Cited by 3
Ramesh, A., Sivapragash, M., Kumar, K. K. A., & Leema, N. (2023) · Transactions of the Indian Institute of Metals · doi:10.1007/s12666-023-02905-5 · Cited by 3
Ozevin, D., Zhang, L., Basantes-Defaz, A.-D.-C., Yuhas, D. E., Abbasi, Z., & Indacochea, E. (2018) · Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, Civil Infrastructure, and Transportation · doi:10.1117/12.2297455 · Cited by 3
Identification and Technological Impact of Broadband Vibration on the Object
Kovalevskyy, S., & Kovalevska, O. (2021) · Lecture notes in mechanical engineering · doi:10.1007/978-3-030-91327-4_8 · Cited by 3
Non-destructive evaluation and pattern recognition for SCRC columns using the AE technique
Du, F., & Li, D. (2019) · Structural Monitoring and Maintenance · doi:10.12989/smm.2019.6.3.173 · Cited by 3
“At present, most studies on AE utilization are focused on concrete structures (Behnia et al. 2014, Carpinteri et al. 2011) and steel materials (Droubi et al. 2017).”
BackgroundChen, J., & Liu, J. (2023) · IEEE Joint International Information Technology and Artificial Intelligence Conference (ITAIC) · doi:10.1109/itaic58329.2023.10408771 · Cited by 2
“[4] presented a systematic experimental investigation using the AE technique for detecting and classifying different weld defects in carbon steel joint material.”
MethodAcoustic analysis in friction stir welding of 6082 - T6 aluminium alloy plates
Prasad, S. V., Kumar, B. V. R. R., & Rao, V. V. S. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.06.637 · Cited by 2
Effective Topology of Bolted Connections for Detecting Damage Using Guided Wave Ultrasonics
Zhang, L., Zhang, T., & Ozevin, D. (2020) · Practice Periodical on Structural Design and Construction · doi:10.1061/(asce)sc.1943-5576.0000557 · Cited by 2
Wang, S., Zhang, L., Yu, P., Xu, Q., Fan, J., & Yu, J. (2022) · Materials · doi:10.3390/ma15186429 · Cited by 2
“At present, the commonly used nondestructive testing methods for welding defects include acoustic emission testing [7], magnetic particle testing [8], penetrant testing [9], eddy current testing [10], radiographic testing [11], and pulsed thermography testing [12].”
MethodA novel identification and categorization of weld defects in digitized X-ray image
Narkedimilly, L., Nagu, C. S. R., Bangaru, S., Venkata, S. M., & Grandhimala, S. (2025) · AIP conference proceedings · doi:10.1063/5.0300969 · Cited by 1
Dudzik, K., Krawulski, P., Starosta, R., & Ziegler, B. (2025) · Materials · doi:10.3390/ma18214834 · Cited by 1
Fault Diagnosis in Roller Bearings by Using an Advanced Artificial Intelligence-Based Metrology
Yadav, E., Chawla, V. K., Navdeep, & Yadav, S. (2026) · MAPAN · doi:10.1007/s12647-026-00887-5 · Cited by 1
Dai, H., Zhang, J., Bao, F., Liu, X., & He, S. (2026) · Virtual and Physical Prototyping · doi:10.1080/17452759.2026.2705073 · Cited by 1
Nedosieka, S. A., Nedosieka, A. Y., Yaremenko, M. A., Boichuk, O. I., & Ovsienko, M. A. (2021) · Avtomatičeskaâ svarka (Kiev) · doi:10.37434/as2021.04.06 · Cited by 1
Wang, T.-Y., Li, D., Sun, H., & Zhou, W. (2025) · Nondestructive Testing And Evaluation · doi:10.1080/10589759.2025.2507351 · Cited by 1
“In another study, Mohamad G. et al. [13] demonstrated that AE technology effectively detected different types of defects in V-groove welded specimens, thus providing insight into the overall structural health of welded joints.”
The numerical simulation of Lamb wave propagation in laser welding of stainless steel
Zhang, B., Liu, F., Liu, C. X., Li, J., Zhang, B., Zhou, Q., Han, X., & Zhao, Y. (2017) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/274/1/012128 · Cited by 1
Research on Machine Vision Inspection Technology of Tire Nail Hole
Cao, M., & Huo, L. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/394/3/032114
Welding Quality Assessment Using Waveform Signal Analysis of Vibration
Najib, A. M., Fauzi, E. R. I., Bahrin, F. F. K., & Zainudin, N. D. (2019) · Lecture notes in mechanical engineering · doi:10.1007/978-981-13-9539-0_9
DIAGNOSTYKA ELEMENTÓW KONSTRUKCJI STALOWYCH
Kubicki, K. (2019) · Zeszyty Naukowe Politechniki Częstochowskiej Budownictwo · doi:10.17512/znb.2018.1.29
Effect of frictional source signal on acoustic emission features produced on mild steel panel
May, Z. B., Rahman, N. A. A., & Mahmood, A. K. (2020) · IEEE Student Conference on Research and Development (SCOReD) · doi:10.1109/scored50371.2020.9251030
Nedosieka, S. A., Nedosieka, A. Y., Yaremenko, M. A., Boichuk, O. I., & Ovsienko, M. A. (2021) · The Paton Welding Journal · doi:10.37434/tpwj2021.04.06
Acoustic emission inspection of welding defects in the weld seam cooling process
Stepanova, L. N., Kabanov, S. I., Lebedev, E. Y., Владимирович, К. К., & Чернова, В. В. (2022) · AIP conference proceedings · doi:10.1063/5.0124339
Droubi, M. G., Newlands, B., El-Shaib, M. N., & Faisal, N. H. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4507855
Self-citationUse of welded specimens testing for assessment of acoustic emission equipment predictive properties
Nedoseka, S. A., Nedoseka, A. Y., Yaremenko, M. A., Boychuk, O. I., Ovsienko, M. A., & Voloshkevich, I. G. (2024) · Tehničeskaâ diagnostika i nerazrušaûŝij kontrol · doi:10.37434/tdnk2024.03.07
Experimental Study of Mechanical Wave Propagation in Solidifying Cement-Based Composites
Jakubka, L., Topolář, L., Nekorancová, A., Dvořák, R., Hrabová, K., Černý, F., Skibicki, S., & Pazdera, L. (2024) · Materials · doi:10.3390/ma17235971
Zhang, Z., Li, Y., Huang, J., Yu, Y., Qin, R., Su, Y., Wen, G., Cheng, W., & Chen, X. (2025) · Measurement · doi:10.1016/j.measurement.2025.117558
Unique acoustic response of varying feed size in autogenous/semi-autogenous (AG/SAG) mills
Asamoah, R. K., Owusu, K. B., Tang, D., & Chen, L. (2025) · Minerals Engineering · doi:10.1016/j.mineng.2025.109648
Failure analysis and root cause investigations
Sotoodeh, K. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-48535-0.00004-3
Inspection of V-butt welded joints using acoustic emission: detection and identification
Sabzevari, S. A. H. (2026) · Engineering Structures · doi:10.1016/j.engstruct.2026.122418
Geometry-aware misalignment-robust defect analysis framework for PAUT
何滨华, Chen, G., Song, G., & Li, B. (2026) · Measurement · doi:10.1016/j.measurement.2026.121477
Tayfur, S., & Alver, N. (2026) · Construction Materials · doi:10.3390/constrmater6030035
“Different sources of damage in composite materials, such as matrix cracking, delamination, and fiber breakage, can be distinguished from one another through the characteristics of the recorded AE signals [12–17].”
Korzhyk, V., Kvasnytskyi, A., Zhao, Y., Voitenko, O. M., Liu, Z., Khaskin, V. Y., Konoreva, O. V., Bushma, O., & BOZHOK, O. (2026) · Welding in the World · doi:10.1007/s40194-026-02558-0
Applying Machine Learning for Defect Detection in WAAM: A Literature Review
Kumar, P., Kumar, J., & Kumar, S. (2026) · Lecture notes in mechanical engineering · doi:10.1007/978-981-95-9268-5_9
Acoustic emissions based structural diagnosis technique for steel details
Andreotti, R., Zanon, G., di Filippo, R., Bonelli, A., Tondini, N., & Bursi, O. S. (2026) · ce/papers · doi:10.1002/cepa.70495
Acoustic Emission Monitoring for Damage Diagnosis in Welded Steel Components
Andreotti, R., Zanon, G., di Filippo, R., Bonelli, A., & Bursi, O. S. (2026) · Lecture notes in civil engineering · doi:10.1007/978-3-032-39505-4_22
Metadata
- Authors
- Droubi, M. G., Faisal, N. H., Orr, F., Steel, J. A., & El-Shaib, M.
- Affiliations
- Robert Gordon University (GB)
- Arab Academy for Science, Technology, and Maritime Transport (EG)
- Corresponding author
- Droubi, Mohamad G.
- Venue
- Journal of Constructional Steel Research
- Publisher
- Elsevier BV
- Published
- 2017-07
- Volume
- 134
- Pages
- 28-37
- ISSN
- 0143-974X (ISSN-L)
- OpenAlex
- W2600553928
- Cited by
- 85
- References
- 7
- Citations by year
- 2026: 13 · 2025: 8 · 2024: 8 · 2023: 9 · 2022: 10 · 2021: 13 · 2020: 8 · 2019: 7 · 2018: 7 · 2017: 2
- FWCI
- 5.10
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Licence
- cc-by-nc-nd
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- Locations
- Journal of Constructional Steel Research (publishedVersion)
- Open Access Institutional Repository at Robert Gordon University (Robert Gordon University) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Non-Destructive Testing Techniques
- Physical Sciences › Engineering › Mechanics of Materials › Ultrasonics and Acoustic Wave Propagation
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Engineering and Materials Analysis
- Keywords
- acoustic emission, weld defect detection, defect classification, slag inclusions, porosity, weld cracks, pencil lead break test, acoustic emission energy, peak amplitude, wavelet transform, frequency analysis, structural health monitoring
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.