Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 180

The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.

Photo-Fenton disinfection at near neutral pH: Process, parameter optimization and recent advances

Open access
O’Dowd, Kris, Pillai, Suresh C. · 2020 · Journal of Environmental Chemical Engineering

Abstract

The photo-Fenton process is an advanced oxidation process that uses the hydroxyl radical to disinfect and decontaminate water. Its non-selectivity makes it ideal for the removal of a range of microorganisms including those with antimicrobial resistance. Optimum parameters such as pH, temperature, hydrogen peroxide and iron concentrations and the intensity and wavelength of light irradiation are important to carry out an efficient photo-Fenton process. Traditionally photo-Fenton has been carried out at low acidic pH to obtain greater efficiency, but recent studies have been performed at near neutral. The current review examines the effectiveness of the photo-Fenton process at a near neutral pH for the disinfection of water. The optimal pH was seen to be at 2.8, with the efficiency of the photo-Fenton process decreasing as the pH rises. The optimal reagent concentrations showed considerable variation depending on the iron catalyst used and the iron to hydrogen peroxide concentration used. The effect of irradiance and temperature showed improved efficiency with higher levels. Different types of microorganisms such as E. coli, Pseudomonas sp., Enterococcus faecalis, Klebsiella pneumonia, Salmonella spp., total Coliforms, MRSA, MSSA, B. subtilis, Clostridium sp., Faecal Coliform, MS2 coliphage and Curvularia sp. are also examined and the effect the process will have on them. The design of reactors, such as compound parabolic reactors are also examined. The impact of light sources, including the recent reports on LEDs, on the production of hydrogen peroxide and thereby the improvement in the overall photo-Fenton disinfection is also discussed in detail. Finally, a techno-economic analysis to explain various costs associated with photo-Fenton process has also been carried out. It is concluded that the development of new heterogeneous supported immobilised catalysts that could work at the near neutral pH is an area, which requires considerable future research.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.jece.2020.104063

Cites

5 of 5 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 180

Metadata

Authors
O’Dowd, K., & Pillai, S. C.
Venue
Journal of Environmental Chemical Engineering
Publisher
Elsevier BV
Published
2020-10
Volume
8
Issue
5
Pages
104063
ISSN
  • 2213-2929 (ISSN-L)
  • 2213-3437
OpenAlex
W3029739086
Cited by
180
References
5
FWCI
7.10
Type
journal article
Language
en
Open access
hybrid

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.