The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
High-efficiency extraction of bromocresol purple dye and heavy metals as chromium from industrial effluent by adsorption onto a modified surface of zeolite: Kinetics and equilibrium study
Abstract
Tannery industrial effluent is rich in heavy metals and basic dyes as bromocresol purple (BCP), poses an economic problem and a serious danger to the environment. This research had evaluated the importance of the adsorption properties of a modified clinoptilolite (CL) (a type of zeolite) for the removal of BCP dye and some heavy metals as total chromium (tCr) in the ammoniac phase. The modified adsorbent was prepared by mixing solid waste (SW) and CL in a ratio 10:1. The CL, SW, and CL-SW materials were characterized and the adsorption behavior of the later to BCP and tCr was completely studied. The batch removal showed the optimal conditions for BCP adsorption: pH (6.5), time (t) (60 min), temperature (T) (303.15 K), sorbent dosage (m) (60.4 mg), and initial concentration (Co) (11.7 mg/L). Moreover, the optimum conditions for tCr removal were: pH (8.8), t (55 min), T (303.15 K), m (400 mg), and Co (16.0 mg/L). Cr desorption mechanism was an ion exchange reaction. The experimental data of tCr were best fitted by the Freundlich isotherm and the pseudo-second-order kinetic model. The maximum adsorption capacities of BCP and tCr onto the CL-SW were 175.5 mg/g and 37 mg/g, respectively. Thermodynamic studies revealed that the adsorptions were spontaneous and endothermic with an increase of entropy. The CL modified adsorbent seems to be a good and efficient for the removal of dyes as BCP and such heavy metals including Cr. Surprisingly, this treatment has largely improved the physicochemical properties of the industrial wastewater and proved a new concept "Polluter Cleans Polluters (PoClPos)".
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Removal of chromium from water and wastewater by ion exchange resins
Rengaraj, S., Yeon, K.-H., & Moon, S.-H. (2001) · Journal of Hazardous Materials · doi:10.1016/s0304-3894(01)00291-6 · Cited by 747
Removal of chromium from industrial waste by using eucalyptus bark
SARIN, V, & PANT, K. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2005.02.010 · Cited by 577
Chojnacka, K., Chojnacki, A., & Górecka, H. (2005) · Chemosphere · doi:10.1016/j.chemosphere.2004.10.005 · Cited by 573
Li, Q., Zhai, J., Zhang, W., Wang, M., & Zhou, J. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.06.109 · Cited by 437
Adsorption of chromium(III) on lignin
Wu, Y., Zhang, S., Guo, X., & Huang, H. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2008.01.069 · Cited by 326
Equilibrium and kinetic ion exchange studies of Pb2+, Cr3+, Fe3+ and Cu2+ on natural clinoptilolite
Inglezakis, V (2002) · Water Research · doi:10.1016/s0043-1354(01)00504-8 · Cited by 309
Mungasavalli, D. P., Viraraghavan, T., & Jin, Y.-C. (2007) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2006.12.060 · Cited by 235
Removal of chromium(III) from tannery wastewater using activated carbon from sugar industrial waste
FAHIM, N., BARSOUM, B., EID, A., & KHALIL, M. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2005.12.014 · Cited by 229
Akar, E., Altinişik, A., & Seki, Y. (2013) · Ecological Engineering · doi:10.1016/j.ecoleng.2012.12.032 · Cited by 194
Basic and Reactive Dye Removal Using Natural and Modified Zeolites
Karadag, D., Akgul, E., Tok, S., Erturk, F., Kaya, M. A., & Turan, M. (2007) · Journal of Chemical & Engineering Data · doi:10.1021/je7003726 · Cited by 194
Biosorption of Cr(III) ions by eggshells
CHOJNACKA, K. (2005) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2005.02.004 · Cited by 190
Physical and chemical regeneration of zeolitic adsorbents for dye removal in wastewater treatment
Wang, S., Li, H., Xie, S., Liu, S., & Xu, L. (2006) · Chemosphere · doi:10.1016/j.chemosphere.2006.02.043 · Cited by 185
Equilibrium studies on the adsorption of reactive azo dyes into zeolite
Armağan, B., Turan, M., & ęlik, M. S. (2004) · Desalination · doi:10.1016/j.desal.2004.02.091 · Cited by 183
Nsami, J. N., & Mbadcam, J. K. (2013) · Journal of Chemistry · doi:10.1155/2013/469170 · Cited by 142
Han, X., Wong, Y. S., & Tam, N. F. Y. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2006.08.028 · Cited by 142
Removal of heavy metals from wastewater using CFB-coal fly ash zeolitic materials
Koukouzas, N., Vasilatos, C., Itskos, G., Mitsis, I., & Moutsatsou, A. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.08.126 · Cited by 141
MALIK, U., HASANY, S. M., & Subhani, M. S. (2004) · Talanta · doi:10.1016/j.talanta.2004.11.013 · Cited by 124
Wang, C., Li, J., Wang, L., Sun, X., & Huang, J. (2009) · Chinese Journal of Chemical Engineering · doi:10.1016/s1004-9541(08)60239-6 · Cited by 110
Sadegh, H., Shahryari-ghoshekandi, R., Agarwal, S., Tyagi, I., Asif, M., & Gupta, V. K. (2015) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2015.02.007 · Cited by 107
Removal and recycling of ppm levels of methylene blue from an aqueous solution with graphene oxide
Song, S., Ma, Y., Shen, H., Zhang, M., & Zhang, Z. (2015) · RSC Advances · doi:10.1039/c4ra16982d · Cited by 97
Removal of chromium(III) by cation exchange resin, Indion 790 for tannery waste treatment
Sahu, S. K., Meshram, P., Pandey, B. D., Kumar, V., & Mankhand, T. R. (2009) · Hydrometallurgy · doi:10.1016/j.hydromet.2009.08.002 · Cited by 87
Ternary biosorption studies of Cd(II), Cr(III) and Ni(II) on shelled Moringa oleifera seeds
Sharma, P., Kumari, P., Srivastava, M. M., et al. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2005.12.016 · Cited by 86
Chromium removal from water using LTA zeolites: Effect of pH
Basaldella, E. I., Vázquez, P., Iucolano, F., & Caputo, D. (2007) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2007.04.066 · Cited by 85
Effect of Thermal-cured Hydraulic Cement Admixtures on the Mechanical Properties of Concrete
Aljerf, L. (2015) · Interceram - International Ceramic Review · doi:10.1007/bf03401142 · Cited by 79
Self-citationJoshi, U. D., Joshi, P. N., Tamhankar, S. S., Joshi, V. P., Idage, B. B., Joshi, V. V., & Shiralkar, V. P. (2002) · Thermochimica Acta · doi:10.1016/s0040-6031(01)00840-1 · Cited by 59
Design and Sensing Properties of an Integrated Optical Gas Sensor Based on a Multilayer Structure
Airoudj, A., Debarnot, D., Bêche, B., & Poncin‐Epaillard, F. (2008) · Analytical Chemistry · doi:10.1021/ac801320g · Cited by 57
Covarrubias, C., Arriagada, R., Yáñez, J., García, R. A., Angelica, M., de Barros, M. A. S. D., Arroyo, P. A., & Sousa‐Aguiar, E. F. (2005) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.1259 · Cited by 54
Removal of trivalent chromium contaminant from aqueous media using FAU-type zeolite membranes
Covarrubias, C., García, R., Arriagada, R., Yáñez, J., Ramanan, H., Lai, Z., & Michael Tsapatsis, B. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.12.052 · Cited by 50
Ueno, T., Hirayama, S., Ito, M., Nishioka, E., Fukushima, Y., Satoh, T., Idei, M., Horiuchi, Y., Shoji, H., Ohmura, H., et al. (2013) · Annals of Clinical Biochemistry International Journal of Laboratory Medicine · doi:10.1177/0004563213480137 · Cited by 47
Özdemir, M., Durmuş, Ö., Şahi̇n, Ö., & Saka, C. (2015) · Desalination and Water Treatment · doi:10.1080/19443994.2015.1085916 · Cited by 45
Removal of Heavy Metals and Dyes Using Low Cost Adsorbents from Aqueous Medium-, A Review
K.S, G. K. S. G. (2013) · IOSR Journal of Environmental Science Toxicology and Food Technology · doi:10.9790/2402-0435668 · Cited by 36
Bi-porous bioinspired chitosan foams with layered structure and their adsorption for xylenol orange
Wang, X., Kong, W., Xie, W., Li, L., Liu, Y., Wu, X., & Gao, J. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.03.059 · Cited by 34
Metwally, S. S., Hassan, M. A., & Aglan, R. F. (2013) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2013.05.002 · Cited by 27
Guan, Q., Wu, D., Lin, Y., Chen, X., Wang, X., Li, C., He, S., & Kong, H. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.12.106 · Cited by 27
Effect Of Metal Ions On Triphenylmethane Dye Decolorization By Laccase From Trametes Versicolor
Chmelová, D., & Ondrejovič, M. (2015) · Nova Biotechnologica et Chimica · doi:10.1515/nbec-2015-0026 · Cited by 18
Bousnoubra, I., Djebbar, K., Abdessemed, A., & Sehili, T. (2016) · Desalination and Water Treatment · doi:10.1080/19443994.2016.1174741 · Cited by 13
Cited by
Fly ash properties, characterization, and applications: A review
Alterary, S. S., & Marei, N. H. (2021) · Journal of King Saud University - Science · doi:10.1016/j.jksus.2021.101536 · Cited by 365
Possible applications of coal fly ash in wastewater treatment
Mushtaq, F., Zahid, M., Bhatti, I. A., Nasir, S., & Hussain, T. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.03.054 · Cited by 297
Cinperi, N. C., Ozturk, E., Yigit, N. O., & Kitis, M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.166 · Cited by 215
Bhardwaj, A., Kumar, S., & Singh, D. (2023) · Water Quality Research Journal · doi:10.2166/wqrj.2023.002 · Cited by 98
Batool, A., & Valiyaveettil, S. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104902 · Cited by 85
Metadata
- Authors
- Aljerf, L.
- Venue
- Journal of Environmental Management
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 225
- Pages
- 120-132
- ISSN
- 0301-4797 (ISSN-L)
- OpenAlex
- W2885182115
- Cited by
- 396
- References
- 36
- FWCI
- 19.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.