Highly selective transport of lithium across a supported liquid membrane
Open accessThe DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
Abstract Lithium extraction is a major concern in view of the increase in battery manufacturing. Separation of lithium from associated sodium is still a challenging task due to the similar chemical behavior of these alkali metals. Lithium sources such as salt brines or seawater usually contain large amounts of sodium which requires a high selectivity for the lithium extraction process. In this study, we demonstrate the application of a supported liquid membrane (SLM) with very high selectivity for the separation of lithium from sodium. A synergistic extraction system made of heptafluoro-dimethyloctanedione (HFDOD) and tri-n-octylphosphine oxide (TOPO) ligands diluted in dodecane was selected based on its extraction efficiency (>99 % of lithium extracted) and selectivity for lithium over sodium (separation factor ca.400). Several experimental parameters were studied using a SLM made of HFDOD and TOPO (initial lithium concentration and sodium to lithium concentration ratio in the feed aqueous phase, HFDOD: TOPO ratio in the organic phase). It was found that high lithium permeation rates can be obtained even for low lithium concentrations and high sodium concentration. Membrane stability was evaluated and found to be poor, i.e. significant loss of performances was observed after one cycle of use, due to the leakage of the organic phase and change in HFDOD: TOPO ratio into it. The SLM system designed is suitable for the extraction of lithium from lowly concentrated solutions such as brines and seawater.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recovery and recycling of lithium: a review
Swain, B. (2017) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.08.031 · Cited by 1,713
Lithium availability and future production outlooks
Vikström, H., Davidsson, S., & Höök, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.005 · Cited by 926 · cited 1×
“Thanks to their high charge to weight ratio, lithium batteries are the current solution to empower electric cars and to store energy, impacting the consumption of lithium [6].”
BackgroundMembrane-based technologies for lithium recovery from water lithium resources: A review
Li, X., Mo, Y., Qing, W., Shao, S., Tang, C. Y., & Li, J. (2019) · Journal of Membrane Science · doi:10.1016/j.memsci.2019.117317 · Cited by 756 · cited 1×
“Among the already available separation methods, membrane techniques allow to obtain a continuous and selective extraction of lithium with a low environmental impact [15].”
MethodNovel approaches for lithium extraction from salt-lake brines: A review
Liu, G., Zhao, Z., & Ghahreman, A. (2019) · Hydrometallurgy · doi:10.1016/j.hydromet.2019.05.005 · Cited by 465 · cited 1×
“Nowadays, lithium‐rich brine water remains the most important source of lithium [10].”
BackgroundThe beneficiation of lithium minerals from hard rock ores: a review
Tadesse, B., Makuei, F., Albijanic, B., & Dyer, L. (2019) · Minerals Engineering · doi:10.1016/j.mineng.2018.11.023 · Cited by 452
Somrani, A., Hamzaoui, A. H., & Pontie, M. (2013) · Desalination · doi:10.1016/j.desal.2013.03.009 · Cited by 388 · cited 1×
“3 separation of lithium from magnesium and sodium was demonstrated using nanofiltration and reverse osmosis [16].”
MethodWei, S., Wei, Y., Chen, T., Liu, C., & Tang, Y. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122407 · Cited by 230
Lithium extraction from complex aqueous solutions using supported ionic liquid membranes
Zante, G., Boltoeva, M., Masmoudi, A., Barillon, R., & Trébouet, D. (2019) · Journal of Membrane Science · doi:10.1016/j.memsci.2019.03.013 · Cited by 142 · cited 2×
“The membrane transport experiments were carried out at ambient temperature, using the experimental device described in a previous study [32].”
BackgroundMethodSelf-citationRecovery of lithium from geothermal water by solvent extraction technique
HANO, T., MATSUMOTO, M., OHTAKE, T., EGASHIR, N., & HORI, F. (1992) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299208918100 · Cited by 94
Cited by
Technology for the Recovery of Lithium from Geothermal Brines
Stringfellow, W. T., & Dobson, P. F. (2021) · Energies · doi:10.3390/en14206805 · Cited by 293
“[199] demonstrated the application of a SLM with high selectivity for separating lithium from sodium.”
BackgroundMethodInfluentialA review on lithium recovery using electrochemical capturing systems
Zavahir, S., Elmakki, T., Gulied, M., Ahmad, Z., Al-Sulaiti, L., Shon, H. K., Chen, Y., Park, H., Batchelor, B., & Han, D. S. (2021) · Desalination · doi:10.1016/j.desal.2020.114883 · Cited by 220
Marconi, P., Arengo, F., & Clark, A. (2022) · Wetlands Ecology and Management · doi:10.1007/s11273-022-09872-6 · Cited by 60
Metadata
- Authors
- Zante, G., Boltoeva, M., Masmoudi, A., Barillon, R., & Trébouet, D.
- Venue
- Journal of Fluorine Chemistry
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 236
- Pages
- 109593
- ISSN
- 0022-1139 (ISSN-L)
- OpenAlex
- W3035247221
- Cited by
- 51
- References
- 9
- FWCI
- 3.43
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.