The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Preparation of nitrogen-doped porous carbon material by a hydrothermal-activation two-step method and its high-efficiency adsorption of Cr(VI)
Abstract
Nitrogen-doped carbon spheres (CSs-N) were synthesized by a hydrothermal method with glucose as the carbon source and urea as the nitrogen source. The synthesized nitrogen-doped carbon spheres were activated by KOH to prepare high performance nitrogen-doped porous carbon material (PCM-N) for adsorption of Cr(VI). SEM, TEM, BET, Raman spectroscopy, XRD, XPS, Zeta potential and elemental analysis techniques were used to characterize the materials, and the properties of the materials were tested by a batch adsorption method. The results show that the specific surface area of PCM-N is 1600.67 m2/g, and the maximum adsorption capacity of Cr(VI) is 402.9 mg/g, and the performance was better than that of a similar materials (Longan seed and Fox nutshell and so on). Furthermore, the adsorption capacity will increase with increasing temperature. In this study, the kinetics and isotherm model of adsorption parameters are fitted, and it is found that the adsorption process is in accordance with the Pseudo-second-order kinetic model and Freundlich model, thermodynamic parameters show that the adsorption of Cr(VI) onto the PCM-N was spontaneous endothermic process. The regeneration adsorption experiment showed that PCM-N has good reusability and high application value.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Jamshidifard, S., Koushkbaghi, S., Hosseini, S., Rezaei, S., Karamipour, A., Jafari rad, A., & Irani, M. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.01.024 · Cited by 540
RetractedNitrogen-doped carbon materials
Inagaki, M., Toyoda, M., Soneda, Y., & Morishita, T. (2018) · Carbon · doi:10.1016/j.carbon.2018.02.024 · Cited by 867 · cited 1×
“In addition, nitrogen doping can improve the properties of porous carbon materials (Inagaki et al., 2018).”
BackgroundLiu, Z., Zhang, F.-S., & Wu, J. (2010) · Fuel · doi:10.1016/j.fuel.2009.08.042 · Cited by 545
Zheng, Y., Cheng, B., You, W., Yu, J., & Ho, W. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.02.013 · Cited by 465
Krishna Kumar, A. S., Jiang, S.-J., & Tseng, W.-L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06948j · Cited by 250
Enhanced antimonate (Sb(V)) removal from aqueous solution by La-doped magnetic biochars
Wang, L., Wang, J., Wang, Z., He, C., Lyu, W., Yan, W., & Yang, L. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.08.074 · Cited by 180
Cited by
Insight into activated carbon from different kinds of chemical activating agents: A review
Gao, Y., Yue, Q., Gao, B., & Li, A. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141094 · Cited by 681
Metadata
- Authors
- Liang, H., Sun, R., Song, B., Sun, Q., Peng, P., & She, D.
- Venue
- Journal of Hazardous Materials
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 387
- Pages
- 121987
- ISSN
- 0304-3894 (ISSN-L)
- OpenAlex
- W2996939169
- Cited by
- 195
- References
- 6
- FWCI
- 6.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Preparation of nitrogen-doped porous carbon material by a hydrothermal-activation two-step method and its high-efficiency adsorption of Cr(VI). https://app.cochat.ai/papers/10.1016/j.jhazmat.2019.121987
- The paper
- Liang, H., Sun, R., Song, B., Sun, Q., Peng, P., & She, D. (2020). Preparation of nitrogen-doped porous carbon material by a hydrothermal-activation two-step method and its high-efficiency adsorption of Cr(VI). Journal of Hazardous Materials. https://doi.org/10.1016/j.jhazmat.2019.121987
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.