Formation of a keratin layer with silk fibroin-polyethylene glycol composite hydrogel fabricated by digital light processing 3D printing
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Abstract Silk fibroin (SF)-incorporated 4-arm polyethylene glycol acrylate (PEG4A) was used as a bioink for digital light processing three-dimensional printing. A visible range of light was adopted for the process to assure the safety of the cells in the bioink. Fibroblast cells were embedded in the printed hydrogels, and the keratinocyte cells were cultured at the surfaces of the hydrogels. The proliferation of cells with the bioink materials, PEG4A and SF-PEG4A, and the toxicity of these materials, were verified by live/dead and alamarBlue assays. The primary human keratinocytes on the SF-PEG4A hydrogel scaffold generated a keratin layer by the tissue culture at the air-liquid interface, promoting maturation and stratification. SF-polyethylene glycol hydrogels showed higher cell proliferation and cell spreading, and the thicker keratin layer was formed with SF-PEG4A hydrogels compared with PEG4A hydrogels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Altman, G. H., Diaz, F., Jakuba, C., Calabro, T., Horan, R. L., Chen, J., Lu, H., Richmond, J., & Kaplan, D. L. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00353-8 · Cited by 3,458
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
3D printing of functional biomaterials for tissue engineering
Zhu, W., Ma, X., Gou, M., Mei, D., Zhang, K., & Chen, S. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.03.014 · Cited by 822
Na, K., Shin, S., Lee, H., Shin, D., Baek, J., Kwak, H., Park, M., Shin, J., & Hyun, J. (2018) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2017.12.032 · Cited by 117
Self-citation
Cited by
Progress in 3D bioprinting technology for tissue/organ regenerative engineering
Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
3D bioprinted silk fibroin hydrogels for tissue engineering
Kim, S. H., Hong, H., Ajiteru, O., Sultan, M. T., Lee, Y. J., Lee, J. S., Lee, O. J., Lee, H., Park, H. S., Choi, K. Y., et al. (2021) · Nature Protocols · doi:10.1038/s41596-021-00622-1 · Cited by 294
Self-citationTan, X. H., Liu, L., Mitryashkin, A., Wang, Y., & Goh, J. C. H. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c00313 · Cited by 36
Photocrosslinkable silk-based biomaterials for regenerative medicine and healthcare applications
Dey, S., Jaiswal, C., Shome, S., Bhar, B., Bandyopadhyay, A., Manikumar, K., Dadheech, R., & Mandal, B. B. (2023) · Regenerative Engineering and Translational Medicine · doi:10.1007/s40883-022-00277-8 · Cited by 24
Metadata
- Authors
- Kwak, H., Shin, S., Lee, H., & Hyun, J.
- Venue
- Journal of Industrial and Engineering Chemistry
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 72
- Pages
- 232-240
- ISSN
- 1226-086X (ISSN-L)
- OpenAlex
- W2905970547
- Cited by
- 65
- References
- 5
- FWCI
- 2.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Formation of a keratin layer with silk fibroin-polyethylene glycol composite hydrogel fabricated by digital light processing 3D printing. https://app.cochat.ai/papers/10.1016/j.jiec.2018.12.023
- The paper
- Kwak, H., Shin, S., Lee, H., & Hyun, J. (2019). Formation of a keratin layer with silk fibroin-polyethylene glycol composite hydrogel fabricated by digital light processing 3D printing. Journal of Industrial and Engineering Chemistry. https://doi.org/10.1016/j.jiec.2018.12.023
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.