The DOI matches its Crossref record; 97 of the 100 references it cites were found in a registry or an index.
3D bioprinted silk fibroin hydrogels for tissue engineering
Abstract
The development of biocompatible and precisely printable bioink addresses the growing demand for three-dimensional (3D) bioprinting applications in the field of tissue engineering. We developed a methacrylated photocurable silk fibroin (SF) bioink for digital light processing 3D bioprinting to generate structures with high mechanical stability and biocompatibility for tissue engineering applications. Procedure 1 describes the synthesis of photocurable methacrylated SF bioink, which takes 2 weeks to complete. Digital light processing is used to fabricate 3D hydrogels using the bioink (1.5 h), which are characterized in terms of methacrylation, printability, mechanical and rheological properties, and biocompatibility. The physicochemical properties of the bioink can be modulated by varying photopolymerization conditions such as the degree of methacrylation, light intensity, and concentration of the photoinitiator and bioink. The versatile bioink can be used broadly in a range of applications, including nerve tissue engineering through co-polymerization of the bioink with graphene oxide, and for wound healing as a sealant. Procedure 2 outlines how to apply 3D-printed SF hydrogels embedded with chondrocytes and turbinate-derived mesenchymal stem cells in one specific in vivo application, trachea tissue engineering, which takes 2-9 weeks.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The FTIR of pure GMA shows bands at 1265 cm⁻¹, corresponding to C-OH stretching of the alcohol formed after epoxide ring opening, and at 1165 and 951 cm⁻¹, representing CH₂ stretching and rocking vibrations of the methacrylate vinyl group (Figure 1D) [19,20].”
In the citing paper
“In particular, methacrylated silk fibroin (SFMA) has been used to enhance crosslinking density and modulate mechanical behavior in composite hydrogels [19,20,21].”
In the citing paper
“Park and colleagues utilized swept‐source OCT for the in vivo non‐invasive monitoring of rabbit corneas following implantation with 3D bioprinted decellularized collagen sheets.[ 106 ]”
From Bioactive scaffolds for tissue engineering: A review of decellularized extracellular matrix applications and innovations (2025) · cites this paper as [106]
Citations
Cites
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Structural and Rheological Properties of Methacrylamide Modified Gelatin Hydrogels
Van Den Bulcke, A. I., Bogdanov, B., De Rooze, N., Schacht, E. H., Cornelissen, M., & Berghmans, H. (2000) · Biomacromolecules · doi:10.1021/bm990017d · Cited by 1,536
Fairbanks, B. D., Schwartz, M. P., Bowman, C. N., & Anseth, K. S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.08.055 · Cited by 1,200
Progress in 3D bioprinting technology for tissue/organ regenerative engineering
Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156
Surprising strength of silkworm silk
Shao, Z., & Vollrath, F. (2002) · Nature · doi:10.1038/418741a · Cited by 1,003
Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing
Kim, S. H., Yeon, Y. K., Lee, J. M., Chao, J. R., Lee, Y. J., Seo, Y. B., Sultan, M. T., Lee, O. J., Lee, J. S., Yoon, S.-I., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03759-y · Cited by 972
Self-citationStructure and Properties of Silk Hydrogels
Kim, U.-J., Park, J., Li, C., Jin, H.-J., Valluzzi, R., & Kaplan, D. L. (2004) · Biomacromolecules · doi:10.1021/bm0345460 · Cited by 856
Research works printed but not linked: 1
- Yadav, D. & Gaikwad, A. Comparison and testing of tensile strength for low & medium carbon steel. Int. J. Mech. Eng. 4, 1–8 (2015).
Cited by
Immunoregulation in Diabetic Wound Repair with a Photoenhanced Glycyrrhizic Acid Hydrogel Scaffold
Qian, Y., Zheng, Y., Jin, J., Wu, X., Xu, K., Dai, M., Niu, Q., Zheng, H., He, X., & Shen, J. (2022) · Advanced Materials · doi:10.1002/adma.202200521 · Cited by 756
Additive manufacturing by digital light processing: a review
Chaudhary, R., Fabbri, P., Leoni, E., Mazzanti, F., Akbari, R., & Antonini, C. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00336-0 · Cited by 450
Wound management materials and technologies from bench to bedside and beyond
Wang, C., Shirzaei Sani, E., Shih, C.-D., Lim, C. T., Wang, J., Armstrong, D. G., & Gao, W. (2024) · Nature Reviews Materials · doi:10.1038/s41578-024-00693-y · Cited by 396
Arif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
Silk chemistry and biomedical material designs
Sahoo, J. K., Hasturk, O., Falcucci, T., & Kaplan, D. L. (2023) · Nature Reviews Chemistry · doi:10.1038/s41570-023-00486-x · Cited by 388
Metadata
- Authors
- Kim, S. H., Hong, H., Ajiteru, O., Sultan, M. T., Lee, Y. J., Lee, J. S., Lee, O. J., Lee, H., Park, H. S., Choi, K. Y., Lee, J. S., Ju, H. W., Hong, I.-S., & Park, C. H.
- Affiliations
- Hallym University (KR)
- Gachon University (KR)
- Corresponding author
- Park, Chan Hum
- ORCID
- Venue
- Nature Protocols
- Published
- 2021-10-29
- Volume
- 16
- Issue
- 12
- Pages
- 5484-5532
- ISSN
- 1750-2799 (ISSN-L)
- 1754-2189
- OpenAlex
- W3209396341
- Cited by
- 294
- References
- 100
- Citations by year
- 2026: 52 · 2025: 78 · 2024: 77 · 2023: 52 · 2022: 35
- FWCI
- 3.47
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springernature.com/gp/researchers/text-and-data-mining (tdm)
- www.springernature.com/gp/researchers/text-and-data-mining (vor)
- Locations
- Nature Protocols (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Korea Health Industry Development Institute (HI20C0408)
- Ministry of Health and Welfare (20012327)
- Hallym University
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Silk-based biomaterials and applications
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- silk fibroin, 3D bioprinting, digital light processing, photocurable hydrogel, tissue engineering scaffolds, biocompatibility, neural tissue engineering, chondrocytes, mesenchymal stem cells
- MeSH terms
- Animals, Fibroins, Graphite, Humans, Light, Methacrylates, Nerve Tissue, Rabbits, Trachea, Wound Healing, Chondrocytes, Hydrogels, Tissue Engineering, Mice, Tissue Scaffolds, Mesenchymal Stem Cells, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D bioprinted silk fibroin hydrogels for tissue engineering. https://app.cochat.ai/papers/10.1038/s41596-021-00622-1
- The paper
- Kim, S. H., Hong, H., Ajiteru, O., Sultan, M. T., Lee, Y. J., Lee, J. S., Lee, O. J., Lee, H., Park, H. S., Choi, K. Y., Lee, J. S., Ju, H. W., Hong, I.-S., & Park, C. H. (2021). 3D bioprinted silk fibroin hydrogels for tissue engineering. Nature Protocols. https://doi.org/10.1038/s41596-021-00622-1
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.