The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Ligand imprinted composite adsorbent for effective Ni(II) ion monitoring and removal from contaminated water
Open accessAbstract
Heavy metal especially nickel (Ni(II)) is the most pernicious kind of pollution since it is both poisonous and difficult to break down in nature and can cause many human disorders and diseases. The monitoring and removal of Ni(II) ions optically is required to enhance the quality of the water and make it appropriate for drinking as well as other uses around the residence. Therefore, the goal of the current work was to synthesize ligand imprinted composite adsorbent (MCA) and utilize it as an adsorbent to monitor and remove Ni(II) ions from the water. Based on the findings gathered, the MCA that was synthesized had a large particle size with a high surface area even after the ligand impregnation. The MCA was enhanced significantly in color with the contact of Ni(II) ion with limit detection at 0.35 µg/L. The maximum level of Ni(II) ions was eliminated (99%) when the pH was adjusted to 5.50. The Langmuir model was also used to study the adsorption equilibrium data and the maximum adsorption capacity was 167.55 mg/g. Additionally, the method can selectively detect and remove Ni(II) even in the presence of diverse metal ions. Overall, the MCA offers an ideal platform for the on-site monitoring and removal of heavy metal ions, especially in resource-limited areas.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3 retracted
Hasan, M. N., Salman, M. S., Islam, A., Znad, H., & Hasan, M. M. (2021) · Microchemical Journal · doi:10.1016/j.microc.2020.105800 · Cited by 220
Self-citationRetractedSalman, M. S., Hasan, M. N., Kubra, K. T., & Hasan, M. M. (2021) · Microchemical Journal · doi:10.1016/j.microc.2020.105868 · Cited by 203
Self-citationRetractedOptimization of innovative composite sensor for Pb(II) detection and capturing from water samples
Salman, M. S., Znad, H., Hasan, M. N., & Hasan, M. M. (2021) · Microchemical Journal · doi:10.1016/j.microc.2020.105765 · Cited by 199
Self-citationRetractedDing, Z., Hu, X., Wan, Y., Wang, S., & Gao, B. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2015.10.007 · Cited by 465
Enhanced toxic dye removal from wastewater using biodegradable polymeric natural adsorbent
Kubra, K. T., Salman, M. S., & Hasan, M. N. (2021) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2021.115468 · Cited by 439
Self-citationWaliullah, R. M., Rehan, A. I., Awual, M. E., Rasee, A. I., Sheikh, M. C., Salman, M. S., Hossain, M. S., Hasan, M., Kubra, K. T., Hasan, M. N., et al. (2023) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2023.122763 · Cited by 383
Self-citationSheikh, M. C., Hasan, M. M., Hasan, M. N., Salman, M. S., Kubra, K. T., Awual, M. E., Waliullah, R. M., Rasee, A. I., Rehan, A. I., Hossain, M. S., et al. (2023) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2023.122854 · Cited by 365
Self-citationEfficient encapsulation of toxic dye from wastewater using biodegradable polymeric adsorbent
Kubra, K. T., Salman, M. S., Znad, H., & Hasan, M. N. (2021) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2021.115541 · Cited by 271
Self-citationNovel solid-state sensor material for efficient cadmium(II) detection and capturing from wastewater
Shahat, A., Kubra, K. T., Salman, M. S., Hasan, M. N., & Hasan, M. M. (2021) · Microchemical Journal · doi:10.1016/j.microc.2021.105967 · Cited by 241
Self-citationPawar, R. R., Lalhmunsiama, Bajaj, H. C., & Lee, S.-M. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2015.11.014 · Cited by 232
Gopalakrishnan, A., Krishnan, R., Thangavel, S., Venugopal, G., & Kim, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2015.06.005 · Cited by 201
Mahdi, Z., Hanandeh, A. E., & Yu, Q. (2019) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2019.103379 · Cited by 153
Nithya, K., Sathish, A., Kumar, P. S., & Ramachandran, T. (2017) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2017.10.028 · Cited by 137
Colorimetric sensing of heavy metals on metal doped metal oxide nanocomposites: A review
Ali, Z., Ullah, R., Tüzen, M., Ullah, S., Rahim, A., & Saleh, T. A. (2022) · Trends in Environmental Analytical Chemistry · doi:10.1016/j.teac.2022.e00187 · Cited by 126
Ordered mesoporous carbons as effective sorbents for removal of heavy metal ions
Barczak, M., Michalak, K., Gdula, K., Tyszczuk‐Rotko, K., Dobrowolski, R., & Dąbrowski, A. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.03.010 · Cited by 124
Sharifi, M. J., Nouralishahi, A., & Hallajisani, A. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.125984 · Cited by 116
El‐Toni, A. M., Habila, M. A., Ibrahim, M. A., Labis, J. P., & ALOthman, Z. A. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.04.072 · Cited by 107
Al‐Hazmi, G. H., Refat, M. S. E.-D., Alshammari, K. F., Kubra, K. T., & Shahat, A. (2022) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2022.134187 · Cited by 104
Self-citationArchitecture of optical sensor for recognition of multiple toxic metal ions from water
Shenashen, M. A., El‐Safty, S. A., & Elshehy, E. A. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2013.06.025 · Cited by 101
Oyewo, O. A., Mutesse, B., Leswifi, T. Y., & Onyango, M. S. (2019) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2019.103251 · Cited by 95
(2021) · Biointerface Research in Applied Chemistry · doi:10.33263/briac115.1337713401 · Cited by 94
Kinetic study of Ni(II) removal using ion flotation: Effect of chemical interactions
Hoseinian, F. S., Rezai, B., Kowsari, E., & Safari, M. (2018) · Minerals Engineering · doi:10.1016/j.mineng.2018.01.028 · Cited by 75
Eyüpoğlu, V., & Kumbasar, R. A. (2014) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.02.037 · Cited by 66
Shahat, A., Kubra, K. T., & El‐marghany, A. (2023) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2023.122166 · Cited by 63
Self-citationReclo, M., Yilmaz, E., Soylak, M., Andruch, V., & Bazel, Y. (2017) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2017.04.066 · Cited by 62
Mohammadi, S. Z., Hamidian, H., & Moeinadini, Z. (2014) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.01.009 · Cited by 58
Yu, X., Hou, Y., Ren, X., Sun, C., & Wang, M. (2022) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2022.102577 · Cited by 57
El‐Safty, S. A., Abdellatef, S. A., Ismael, M., & Shahat, A. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201200326 · Cited by 56
Jalbani, N. B., & Soylak, M. (2014) · Talanta · doi:10.1016/j.talanta.2014.07.099 · Cited by 53
El‐Safty, S. A., Ismail, A. A., & Shahat, A. (2010) · Talanta · doi:10.1016/j.talanta.2010.11.008 · Cited by 51
Chu, J.-H., Kang, J.-K., Park, S., & Lee, C. (2020) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-10162-y · Cited by 33
Davarnejad, R., & Panahi, P. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2015.10.013 · Cited by 27
Sequential separation of cobalt and lithium by sorption: Sorbent set selection
Conte, N., Gómez, J. M., Díez, E., Sáez, P., Monago, J. I., Espinosa, A., & Rodríguez, A. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.122199 · Cited by 20
Cited by
Golmohammadi, G., Joolaei Ahranjani, P., Sereshti, H., Dehghan, K., Sadatfaraji, H., Karami, S., & Rashidi Nodeh, H. (2025) · Separation Science and Technology · doi:10.1080/01496395.2025.2502753 · Cited by 1
Metadata
- Authors
- Awual, M. E., Salman, M. S., Hasan, M. M., Hasan, M. N., Kubra, K. T., Sheikh, M. C., Rasee, A. I., Rehan, A. I., Waliullah, R. M., Hossain, M. S., Marwani, H. M., Asiri, A. M., Rahman, M. M., Islam, A., Khaleque, M. A., & Awual, M. R.
- Venue
- Journal of Industrial and Engineering Chemistry
- Publisher
- Elsevier BV
- Published
- 2024-03
- Volume
- 131
- Pages
- 585-592
- ISSN
- 1226-086X (ISSN-L)
- OpenAlex
- W4388213886
- Cited by
- 341
- References
- 33
- FWCI
- 25.84
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.