The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Industrial IoT in 5G environment towards smart manufacturing
Abstract
Abstract Smart manufacturing based on cyber-physical manufacturing systems (CPMS) has become the development trend and been widely recognized all over the world. Throughout the development trend of CPMS, one of the key issues is industrial Internet-of-Things (IIoT) with the characteristics of automation, smart connected, real-time monitoring, and collaborative control. Along with the permeation and applications of advanced technologies in manufacturing, massive amounts of data have been generated in the manufacturing process. However, the current 3th generation mobile network (3G), 4G and other communication technologies cannot meet the demands of CPMS for high data rate, high reliability, high coverage, low latency, etc., which hinders the development and implementation of CPMS. As a future advanced wireless transmission technology, 5G has a significant potential to promote IIoT and CPMS. Based on the architecture and characteristics of 5G wireless communication technology, this paper proposes the architecture of 5G-based IIoT, and describes the implementation methods of different advanced manufacturing scenarios and manufacturing technologies under the circumstances of three typical application modes of 5G, respectively, i.e., enhance mobile broadband (eMBB), massive machine type communication (mMTC), ultra-reliable and low latency communication (URLLC). Besides, the characteristics, key technologies and challenges of the 5G based IIoT are also analyzed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Edge computing: Vision and challenges
Shi, W., Cao, J., Zhang, Q., Li, Y., & Xu, L. (2016) · IEEE Internet of Things Journal · doi:10.1109/jiot.2016.2579198 · Cited by 8,733
Millimeter Wave Mobile Communications for 5G Cellular: It Will Work!
Rappaport, T. S., Sun, S., Mayzus, R., Zhao, H., Azar, Y., Wang, K., Wong, G. N., Schulz, J. K., Samimi, M., & Gutierrez, F. (2013) · IEEE Access · doi:10.1109/access.2013.2260813 · Cited by 7,351
Internet of Things in industries: A survey
Xu, L. D., He, W., & Li, S. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2300753 · Cited by 5,172
A Cyber-Physical Systems architecture for Industry 4.0-based manufacturing systems
Lee, J., Bagheri, B., & Kao, H.-A. (2015) · Manufacturing Letters · doi:10.1016/j.mfglet.2014.12.001 · Cited by 5,113
Five disruptive technology directions for 5G
Boccardi, F., Heath, R. W., Lozano, A., Marzetta, T. L., & Popovski, P. (2014) · IEEE Communications Magazine · doi:10.1109/mcom.2014.6736746 · Cited by 3,709
Next generation 5G wireless networks: a comprehensive survey
Agiwal, M., Roy, A., & Saxena, N. (2016) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2016.2532458 · Cited by 3,444
Digital twin-driven product design, manufacturing and service with big data
Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0233-1 · Cited by 2,920
Self-citationAn introduction to millimeter-wave mobile broadband systems
Pi, Z., & Khan, F. (2011) · IEEE Communications Magazine · doi:10.1109/mcom.2011.5783993 · Cited by 2,538
The internet of things: a survey
Li, S., Xu, L. D., & Zhao, S. (2015) · Information Systems Frontiers · doi:10.1007/s10796-014-9492-7 · Cited by 2,297
Cellular architecture and key technologies for 5G wireless communication networks
Wang, C.-X., Haider, F., Gao, X., You, X.-H., Yang, Y., Yuan, D., Aggoune, H., Haas, H., Fletcher, S., & Hepsaydir, E. (2014) · IEEE Communications Magazine · doi:10.1109/mcom.2014.6736752 · Cited by 2,212
Digital twin and big data towards smart manufacturing and Industry 4.0: 360 degree comparison
Qi, Q., & Tao, F. (2018) · IEEE Access · doi:10.1109/access.2018.2793265 · Cited by 1,716
Self-citationCyber-physical systems in manufacturing
Monostori, L., Kádár, B., Bauernhansl, T., Kondoh, S., Kumara, S., Reinhart, G., Sauer, O., Schuh, G., Sihn, W., & Ueda, K. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.06.005 · Cited by 1,697
Internet of Things in the 5G Era: Enablers, Architecture, and Business Models
Palattella, M. R., Dohler, M., Grieco, A., Rizzo, G., Torsner, J., Engel, T., & Ladid, L. (2016) · IEEE Journal on Selected Areas in Communications · doi:10.1109/jsac.2016.2525418 · Cited by 1,459
Digital twin shop-floor: a new shop-floor paradigm towards smart manufacturing
Tao, F., & Zhang, M. (2017) · IEEE Access · doi:10.1109/access.2017.2756069 · Cited by 1,397
Self-citation5G Internet of Things: A survey
Li, S., Xu, L. D., & Zhao, S. (2018) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2018.01.005 · Cited by 1,293
Network densification: the dominant theme for wireless evolution into 5G
Bhushan, N., Li, J., Malladi, D., Gilmore, R., Brenner, D., Damnjanovic, A., Sukhavasi, R., Patel, C., & Geirhofer, S. (2014) · IEEE Communications Magazine · doi:10.1109/mcom.2014.6736747 · Cited by 1,180
Recent advances and trends in predictive manufacturing systems in big data environment
Lee, J., Lapira, E., Bagheri, B., & Kao, H.-A. (2013) · Manufacturing Letters · doi:10.1016/j.mfglet.2013.09.005 · Cited by 1,090
The Tactile Internet: Applications and Challenges
Fettweis, G. P. (2014) · IEEE Vehicular Technology Magazine · doi:10.1109/mvt.2013.2295069 · Cited by 911
Augmented reality applications in design and manufacturing
Nee, A. Y. C., Ong, S. K., Chryssolouris, G., & Mourtzis, D. (2012) · CIRP Annals · doi:10.1016/j.cirp.2012.05.010 · Cited by 762
Toward green and soft: a 5G perspective
I, C.-L., Rowell, C., Han, S., Xu, Z., Li, G., & Pan, Z. (2014) · IEEE Communications Magazine · doi:10.1109/mcom.2014.6736745 · Cited by 746
The role of small cells, coordinated multipoint, and massive MIMO in 5G
Jungnickel, V., Manolakis, K., Zirwas, W., Panzner, B., Braun, V., Lossow, M., Sternad, M., Apelfrojd, R., & Svensson, T. (2014) · IEEE Communications Magazine · doi:10.1109/mcom.2014.6815892 · Cited by 727
CCIoT-CMfg: Cloud Computing and Internet of Things-Based Cloud Manufacturing Service System
Tao, F., Cheng, Y., Xu, L. D., Zhang, L., & Li, B. H. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2306383 · Cited by 722
Self-citationInternet of Things for Enterprise Systems of Modern Manufacturing
Bi, Z., Xu, L. D., & Wang, C. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2300338 · Cited by 672
Smart manufacturing must embrace big data
Kusiak, A. (2017) · Nature · doi:10.1038/544023a · Cited by 618
Design considerations for a 5G network architecture
Agyapong, P., Iwamura, M., Staehle, D., Kiess, W., & Benjebbour, A. (2014) · IEEE Communications Magazine · doi:10.1109/mcom.2014.6957145 · Cited by 611
Cloud manufacturing: a computing and service-oriented manufacturing model
Tao, F., Zhang, L., Venkatesh, V. C., Luo, Y., & Cheng, Y. (2011) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405411405575 · Cited by 574
Self-citationBig Data in product lifecycle management
Li, J., Tao, F., Cheng, Y., & Zhao, L. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7151-x · Cited by 480
Self-citationNetworks and devices for the 5G era
Bangerter, B., Talwar, S., Arefi, R., & Stewart, K. (2014) · IEEE Communications Magazine · doi:10.1109/mcom.2014.6736748 · Cited by 471
5G roadmap: 10 key enabling technologies
Akyildiz, I. F., Nie, S., Lin, S.-C., & Chandrasekaran, M. (2016) · Computer Networks · doi:10.1016/j.comnet.2016.06.010 · Cited by 453
Joint Scheduling of URLLC and eMBB Traffic in 5G Wireless Networks
Anand, A., De Veciana, G., & Shakkottai, S. (2018) · IEEE INFOCOM 2018 - IEEE Conference on Computer Communications · doi:10.1109/infocom.2018.8486430 · Cited by 453
New IT Driven Service-Oriented Smart Manufacturing: Framework and Characteristics
Tao, F., & Qi, Q. (2019) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmc.2017.2723764 · Cited by 432
Self-citationChen, S., Ren, B., Gao, Q., Kang, S., Sun, S., & Niu, K. (2017) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2016.2596438 · Cited by 380
Peng, M., Zhang, K., Jiang, J., Wang, J., & Wang, W. (2015) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2014.2379922 · Cited by 333
Wired and wireless sensor networks for industrial applications
Flammini, A., Ferrari, P., Marioli, D., Sisinni, E., & Taroni, A. (2009) · Microelectronics Journal · doi:10.1016/j.mejo.2008.08.012 · Cited by 236
Tao, F., Cheng, J., & Qi, Q. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2759178 · Cited by 221
Self-citationSDMSim: A manufacturing service supply–demand matching simulator under cloud environment
Tao, F., Cheng, J., Cheng, Y., Gu, S., Zheng, T., & Yang, H. (2017) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2016.07.001 · Cited by 192
Self-citationFrom machine-to-machine communications towards cyber-physical systems
Wan, J., Chen, M., Xia, F., Di, L., & Zhou, K. (2013) · Computer Science and Information Systems · doi:10.2298/csis120326018w · Cited by 189
5G ultra-reliable and low-latency systems design
Li, C., Jiang, J., Chen, W., Ji, T., & Smee, J. E. (2017) · European Conference on Networks and Communications · doi:10.1109/eucnc.2017.7980747 · Cited by 185
Self-citationComputer Communication Within Industrial Distributed Environment—a Survey
Gaj, P., Jasperneite, J., & Felser, M. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2209668 · Cited by 170
End-to-End Communication Delay Analysis in Industrial Wireless Networks
Saifullah, A. M., Xu, Y., Lu, C., & Chen, Y. (2014) · IEEE Transactions on Computers · doi:10.1109/tc.2014.2322609 · Cited by 139
Ultra-Reliable Low Latency Communication Using Interface Diversity
Nielsen, J. J., Liu, R., & Popovski, P. (2017) · IEEE Transactions on Communications · doi:10.1109/tcomm.2017.2771478 · Cited by 138
OFDM-Subcarrier Index Selection for Enhancing Security and Reliability of 5G URLLC Services
Hamamreh, J. M., Başar, E., & Arslan, H. (2017) · IEEE Access · doi:10.1109/access.2017.2768558 · Cited by 118
Accelerating 5G QoE via public-private spectrum sharing
Mitola, J., Guerci, J. R., Reed, J., Yao, Y., Chen, Y. J., Clancy, T. C., Dwyer, J., Li, H., Man, H., McGwier, R., et al. (2014) · IEEE Communications Magazine · doi:10.1109/mcom.2014.6815896 · Cited by 105
MAC layer enhancements for ultra-reliable low-latency communications in cellular networks
Pocovi, G., Soret, B., Pedersen, K. I., & Mogensen, P. (2017) · IEEE International Conference on Communications workshops · doi:10.1109/iccw.2017.7962790 · Cited by 99
EGHR: Efficient group-based handover authentication protocols for mMTC in 5G wireless networks
Cao, J. P., Ma, M., Li, H., Fu, Y., & Liu, X. (2017) · Journal of Network and Computer Applications · doi:10.1016/j.jnca.2017.11.009 · Cited by 50
GFDM Frame Design for 5G Application Scenarios
Ferreira, J. S., Rodrigues, H. D., González, A., Nimr, A., Matthé, M., Zhang, D., Mendes, L. L., & Fettweis, G. P. (2017) · Journal of Communication and Information Systems · doi:10.14209/jcis.2017.6 · Cited by 35
Large scale massive MIMO field trial for 5G mobile communications system
Kashima, T., Qiu, J. Y., Shen, H., Tang, C., Tian, T., Wang, X., Hou, X., Jiang, H., Benjebbour, A., Saito, Y., et al. (2016) · International Symposium on Antennas and Propagation · Cited by 23
On the performance of one stage massive random access protocols in 5G systems
Mahmood, N. H., Pratas, N. K., Jacobsen, T. H., & Mogensen, P. (2016) · International Symposium on Turbo Codes and Iterative Information Processing · doi:10.1109/istc.2016.7593133 · Cited by 21
Radio access protocols with multi-user detection for URLLC in 5G
Saur, S., & Centenaro, M. (2017) · Padua Research Archive (University of Padova) · Cited by 16
Cited by
Characterising the Digital Twin: A systematic literature review
Jones, D., Snider, C., Nassehi, A., Yon, J., & Hicks, B. (2020) · CIRP Journal of Manufacturing Science and Technology · doi:10.1016/j.cirpj.2020.02.002 · Cited by 2,422
“5 Fidelity [33] [80] [108] [24] [85] [8] [56] [88] [68] [112] [99] [78] [32] [111] [36] [7] [71] [63] [61] [73] [20] [67] [6] [4] [48] [55] [95] [16] [92] [98] [87] [9] [66] [110] [18] [89] [12]”
InfluentialCICIoT2023: A Real-Time Dataset and Benchmark for Large-Scale Attacks in IoT Environment
Neto, E. C. P., Dadkhah, S., Ferreira, R., Zohourian, A., Lu, R., & Ghorbani, A. A. (2023) · Sensors · doi:10.3390/s23135941 · Cited by 1,194
Digital Twins: A Survey on Enabling Technologies, Challenges, Trends and Future Prospects
Mihai, S., Yaqoob, M., Hung, D. V., Davis, W., Towakel, P., Raza, M., Karamanoglu, M., Barn, B., Shetve, D., Prasad, R. V., et al. (2022) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2022.3208773 · Cited by 1,049
Digital Twin in the IoT Context: A Survey on Technical Features, Scenarios, and Architectural Models
Minerva, R., Lee, G. M., & Crespi, N. (2020) · Proceedings of the IEEE · doi:10.1109/jproc.2020.2998530 · Cited by 812
Siriwardhana, Y., Porambage, P., Liyanage, M., & Ylianttila, M. (2021) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2021.3061981 · Cited by 674
Metadata
- Authors
- Cheng, J., Chen, W., Tao, F., & Lin, C.-L.
- Venue
- Journal of Industrial Information Integration
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 10
- Pages
- 10-19
- ISSN
- 2452-414X (ISSN-L)
- OpenAlex
- W2796127131
- Cited by
- 456
- References
- 50
- FWCI
- 43.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.