Fabrication of 3D biocompatible/biodegradable micro-scaffolds using dynamic mask projection microstereolithography

The design of scaffolds for use in tissue engineering. Part I. Traditional factors

Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2001) · Tissue Engineering · doi:10.1089/107632701753337645 · Cited by 2,234

Scaffold design and fabrication technologies for engineering tissues — state of the art and future perspectives

Hutmacher, D. W. (2001) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856201744489 · Cited by 1,423

Role of material surfaces in regulating bone and cartilage cell response

Boyan, B. D., Hummert, T. W., Dean, D. D., & Schwartz, Z. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85758-9 · Cited by 1,331

Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs

Leong, K. F., Cheah, C. M., & Chua, C. K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00030-9 · Cited by 1,090

Projection micro-stereolithography using digital micro-mirror dynamic mask

Sun, C., Fang, N. X., Wu, D. M., & Zhang, X. (2005) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2004.12.011 · Cited by 885

Rapid prototyping & manufacturing— Fundamentals of stereolithography

Jacobs, P. F. (1993) · Journal of Manufacturing Systems · doi:10.1016/0278-6125(93)90311-g · Cited by 853

Use of stereolithography to manufacture critical‐sized 3D biodegradable scaffolds for bone ingrowth

Cooke, M. N., Fisher, J. P., Dean, D., Rimnac, C. M., & Mikos, A. G. (2002) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.10485 · Cited by 571

A Polymer Foam Conduit Seeded with Schwann Cells Promotes Guided Peripheral Nerve Regeneration

Hadlock, T. A., Sundback, C. A., Hunter, D. A., Cheney, M. L., & Vacanti, J. P. (2000) · Tissue Engineering · doi:10.1089/107632700320748 · Cited by 404

Engineering Bone Regeneration with Bioabsorbable Scaffolds with Novel Microarchitecture

Whang, K., Healy, K. E., Elenz, D. R., Nam, E. K., Tsai, D. C., Thomas, C. H., Nuber, G. W., Glorieux, F. H., Travers, R., & Sprague, S. M. (1999) · Tissue Engineering · doi:10.1089/ten.1999.5.35 · Cited by 401

Tissue ingrowth and degradation of two biodegradable porous polymers with different porosities and pore sizes

van Tienen, T. G., Heijkants, R. G. J. C., Buma, P., de Groot, J. H., Pennings, A. J., & Veth, R. P. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00280-0 · Cited by 270

Additive Manufacturing Techniques for Fabrication of Bone Scaffolds for Tissue Engineering Applications

Jahani, B., Wang, X., & Brooks, A. E. (2020) · Recent Progress in Materials · doi:10.21926/rpm.2003021 · Cited by 31

Emerging micro-additive manufacturing technologies enabled by novel optical methods

Lin, W. S., Chen, D., & Chen, S. (2020) · Photonics Research · doi:10.1364/prj.404334 · Cited by 35

Converging 2D Nanomaterials and 3D Bioprinting Technology: State‐of‐the‐Art, Challenges, and Potential Outlook in Biomedical Applications

Rastin, H., Mansouri, N., Tùng, T. T., Hassan, K., Mazinani, A., Ramezanpour, M., Yap, P. L., Yu, L., Vreugde, S., & Lošić, D. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202101439 · Cited by 31

Photocrosslinkable Polyesters and Poly(ester anhydride)s for Biomedical Applications

Seppälä, J. V., Korhonen, H., Hakala, R. A., & Malin, M. (2011) · Macromolecular Bioscience · doi:10.1002/mabi.201100198 · Cited by 30

Fabrication of medium scale 3D components using a stereolithography system for rapid prototyping

Suryatal, B. K., Sarawade, S. S., & Deshmukh, S. P. (2021) · Journal of King Saud University - Engineering Sciences · doi:10.1016/j.jksues.2021.02.012 · Cited by 29

Mimicking the biological world: Methods for the 3 D structuring of artificial cellular environments

Schober, A., Fernekorn, U., Singh, S., Schlingloff, G., Gebinoga, M., Hampl, J., & Williamson, A. (2013) · Engineering in Life Sciences · doi:10.1002/elsc.201200088 · Cited by 29

Evaluation of tensile properties of 3D-printed lattice composites: Experimental and machine learning-based predictive modelling

Mahapatra, I., Chikkanna, N., Kumar, S., Jayaganthan, R., & Ramachandran, V. (2025) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2025.108823 · Cited by 27

Practical Use of Hydrogels in Stereolithography for Tissue Engineering Applications

Arcaute, K., Mann, B. K., & Wicker, R. B. (2011) · Springer eBooks · doi:10.1007/978-0-387-92904-0_12 · Cited by 27

Low-Temperature Deposition Manufacturing: A Versatile Material Extrusion-Based 3D Printing Technology for Fabricating Hierarchically Porous Materials

Liu, C., Tong, J., Ma, J., Wang, D., Xu, F., Liu, Y., Chen, Z., & Lao, C. (2019) · Journal of Nanomaterials · doi:10.1155/2019/1291067 · Cited by 28

Rigid biodegradable photopolymer structures of high resolution using deep-UV laser photocuring

Brandi, F., Anjum, F., Ceseracciu, L., Barone, A. C., & Athanassiou, A. (2011) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/21/5/054007 · Cited by 26

Smooth Surface Fabrication Based on Controlled Meniscus and Cure Depth in Microstereolithography

Pan, Y., & Chen, Y. (2015) · Journal of Micro and Nano-Manufacturing · doi:10.1115/1.4030661 · Cited by 26

3D scaffold fabrication by mask projection excimer laser stereolithography

Beke, S., Farkas, B., Romano, I., & Brandi, F. (2014) · Optical Materials Express · doi:10.1364/ome.4.002032 · Cited by 25

Combined micro and macro additive manufacturing of a swirling flow coaxial phacoemulsifier sleeve with internal micro-vanes

Choi, J.-W., Yamashita, M., Sakakibara, J., Kaji, Y., Oshika, T., & Wicker, R. B. (2010) · Biomedical Microdevices · doi:10.1007/s10544-010-9442-1 · Cited by 25

Flavin mononucleotide photoinitiated cross-linking of hydrogels: Polymer concentration threshold of strengthening

Savelyev, A. G., Bardakova, K. N., Khaydukov, E. V., Generalova, A. N., Popov, V. K., Chichkov, B. N., & Semchishen, V. A. (2017) · Journal of Photochemistry and Photobiology A Chemistry · doi:10.1016/j.jphotochem.2017.03.026 · Cited by 24

Multi‐photon structuring of native polymers: A case study for structuring natural proteins

Gebinoga, M., Katzmann, J., Fernekorn, U., Hampl, J., Weise, F., Klett, M., Läffert, A., Klar, T. A., & Schober, A. (2013) · Engineering in Life Sciences · doi:10.1002/elsc.201200152 · Cited by 24

Fast Mask Image Projection-Based Micro-Stereolithography Process for Complex Geometry

Pan, Y., Chen, Y., & Yu, Z. (2016) · Journal of Micro and Nano-Manufacturing · doi:10.1115/1.4035388 · Cited by 22

Micro-and nanoscale 3D printing

Li, D., Lan, H., & Lu, B. (2015) · Scientia Sinica Technologica · doi:10.1360/n092014-00397 · Cited by 22

Potentials of additive manufacturing with smart materials for chemical biomarkers in wearable applications

Kwon, J., Park, H. W., Park, Y.-B., & Kim, N. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0039-5 · Cited by 21

3D Cell and Scaffold Patterning Strategies in Tissue Engineering

Sawkins, M. J., Shakesheff, K. M., Bonassar, L. J., & Kirkham, G. R. (2013) · Recent Patents on Biomedical Engineering · doi:10.2174/1874764711306010003 · Cited by 20

Concurrent Modelling and Experimental Investigation of Material Properties and Geometries Produced by Projection Microstereolithography

Mostafa, K. G., Arshad, M., Ullah, A., Nobes, D. S., & Qureshi, A. J. (2020) · Polymers · doi:10.3390/polym12030506 · Cited by 19

Multi-objective optimization of process parameters in an area-forming rapid prototyping system using the Taguchi method and a grey relational analysis

Chiu, S., Gan, S.-Y., Tseng, Y.-C., Chen, K.-T., Chen, C.-C., Su, C.-H., & Pong, S. (2016) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/0954405415623479 · Cited by 19

3D printed microfluidic devices with electrodes for electrochemical analysis

Selemani, M. A., Cenhrang, K., Azibere, S., Singhateh, M., & Martin, R. S. (2024) · Analytical Methods · doi:10.1039/d4ay01701c · Cited by 19

Hybrid 3D–2D printing for bone scaffolds fabrication

Seleznev, V. A., & Prinz, V. Y. (2016) · Nanotechnology · doi:10.1088/1361-6528/aa536f · Cited by 18

Fabrication of Microfluidic Devices for Emulsion Formation by Microstereolithography

Männel, M. J., Baysak, E., & Thiele, J. (2021) · Molecules · doi:10.3390/molecules26092817 · Cited by 18

Digital light processing printed hydrogel scaffolds with adjustable modulus

Xu, F., Jin, H., Wu, H., Jiang, A., Qiu, B., Liu, L., Gao, Q., Lin, B., Kong, W., Chen, S., et al. (2024) · Scientific Reports · doi:10.1038/s41598-024-66507-x · Cited by 18

Rapid prototyping in biomedical engineering: structural intricacies of biological materials

Kalita, S. J. (2010) · Elsevier eBooks · doi:10.1533/9781845699802.3.349 · Cited by 17

Effects of Surface Energy Reducing Agents on Adhesion Force in Liquid Bridge Microstereolithography

Alamdari, A. B., Lee, J., Kim, M., Emon, O. F., Dhinojwala, A., & Choi, J. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101522 · Cited by 17

Steroid Eluting Esophageal-Targeted Drug Delivery Devices for Treatment of Eosinophilic Esophagitis

Prasher, A., Shrivastava, R., Dahl, D. K., Sharma-Huynh, P., Maturavongsadit, P., Pridgen, T. A., Schorzman, A. N., Zamboni, W. C., Ban, J., Blikslager, A. T., et al. (2021) · Polymers · doi:10.3390/polym13040557 · Cited by 16

Gradient light video projection-based stereolithography for continuous production of solid objects

Lichade, K. M., Joyee, E. B., & Pan, Y. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.02.048 · Cited by 16

Liquid bridge microstereolithography

Lee, J., Lu, Y., Kashyap, S., Alamdari, A. B., Emon, O. F., & Choi, J. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.02.012 · Cited by 16

Design Considerations for Mask Projection Microstereolithography Systems

Lambert, P. M., Campaigne, E. A., & Williams, C. B. (2013) · doi:10.26153/tsw/15418 · Cited by 16

Additive Manufacturing for Tissue Engineering

Miar, S., Shafiee, A., Guda, T., & Narayan, R. J. (2018) · Springer eBooks · doi:10.1007/978-3-319-45444-3_2 · Cited by 14

Scaffold-supported extracellular matrices preserved by magnesium hydroxide nanoparticles for renal tissue regeneration

Kim, Y. A., Chun, S. Y., Park, S.-B., Kang, E. Y., Koh, W., Kwon, T. G., Han, D. K., & Joung, Y. K. (2020) · Biomaterials Science · doi:10.1039/d0bm00871k · Cited by 14

Inkjet printing, laser-based micromachining, and micro–3D printing technologies for MEMS

Fischer, A. C., Mäntysalo, M., & Niklaus, F. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-817786-0.00021-9 · Cited by 14

Photosensitive Al2O3 slurry with high solid content and low viscosity

Zhang, X., Zhang, J., Tian, Y., Xiao, S., Li, J., & Han, G. (2023) · Journal of the Korean Ceramic Society · doi:10.1007/s43207-023-00286-5 · Cited by 13

Maskless Lithography Based on DMD

Zhong, K. J., Gao, Y., & Li, F. (2013) · Key engineering materials · doi:10.4028/www.scientific.net/kem.552.207 · Cited by 13

Inkjet Printing, Laser-Based Micromachining and Micro 3D Printing Technologies for MEMS

Fischer, A. C., Mäntysalo, M., & Niklaus, F. (2015) · Elsevier eBooks · doi:10.1016/b978-0-323-29965-7.00026-9 · Cited by 16

Selective ablation-assisted two-photon stereolithography for effective nano- and microfabrication

Lim, T. W., Son, Y., Yang, D., Kong, H. J., & Lee, K.-S. (2010) · Applied Physics A · doi:10.1007/s00339-010-6051-z · Cited by 13

3.8 Laser-Based 3D Printing and Surface Texturing

Selimis, A., & Farsari, M. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.09171-2 · Cited by 14

Lithography-based manufacturing of advanced ceramics for orthopaedic applications: A comparative tribological study

Paterlini, A., Stamboulis, A. G., Turq, V., Laloo, R., Schwentenwein, M., Brouczek, D., Piccinini, M., & Bertrand, G. (2021) · Open Ceramics · doi:10.1016/j.oceram.2021.100170 · Cited by 13

Ceramics Processing by Additive Manufacturing

Datta, P., & Balla, V. K. (2021) · Transactions of Indian National Academy of Engineering · doi:10.1007/s41403-021-00225-y · Cited by 12

3D-Printed Complex Microstructures with a Self-Sacrificial Structure Enabled by Grayscale Polymerization and Ultrasonic Treatment

Liao, Y.-B., Li, W., Zhan, Z., Duan, H., Liu, P., Chen, Y., & Wang, Z. (2021) · ACS Omega · doi:10.1021/acsomega.1c02177 · Cited by 12

The promise of organotypic hepatic and gastrointestinal models

Vu, L. T., Less, R. R., & Rajagopalan, P. (2014) · Trends in biotechnology · doi:10.1016/j.tibtech.2014.04.006 · Cited by 12

Comparison of Two Inexpensive Rapid Prototyping Methods for Manufacturing Filament Target Ultrasound Phantoms

Füzesi, K., & Gyöngy, M. (2016) · Ultrasound in Medicine & Biology · doi:10.1016/j.ultrasmedbio.2016.11.006 · Cited by 11

Dynamic Covalent Bonds in 3D-Printed Polymers: Strategies, Principles, and Applications

Nguyen, T. D., Nguyen, M. T. N., & Lee, J. S. (2025) · Applied Sciences · doi:10.3390/app152111755 · Cited by 10

Dynamic resolution control in a laser projection-based stereolithography system

Pan, Y., & Dagli, C. R. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2015-0113 · Cited by 10

Advanced optical methods and materials for fabricating 3D tissue scaffolds

Li, X., Lu, W., Xu, X., Wang, Y., & Chen, S. (2022) · Light Advanced Manufacturing · doi:10.37188/lam.2022.026 · Cited by 12

Recent advances of additively manufactured noninvasive kinematic biosensors

Lee, J., Park, S., Lee, J., Kim, N., & Kim, M. K. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1303004 · Cited by 9

Slurry based stereolithography: a solid freeform fabrication method of ceramics and composites

Song, X. (2016) · doi:10.25549/usctheses-c40-279140 · Cited by 9

Design and optimization of projection stereolithography additive manufacturing system with multi-pass scanning

Qin, Q., Huang, J., Yao, J., & Gao, W. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2019-0219 · Cited by 8

Assessment of the Development Performance of Additive Manufacturing VPP Parts Using Digital Light Processing (DLP) and Liquid Crystal Display (LCD) Technologies

Batista, M., Mora-Jimenez, J., Salguero, J., & Vázquez, J. (2024) · Applied Sciences · doi:10.3390/app14093607 · Cited by 8

Photocrosslinkable Materials for the Fabrication of Tissue-Engineered Constructs by Stereolithography

Pereira, R. F., & Bártolo, P. (2013) · Computational methods in applied sciences · doi:10.1007/978-94-007-7073-7_8 · Cited by 8

3D Bioprinting Technologies for Cellular Engineering

Larson, C. M., & Shepherd, R. F. (2015) · Springer eBooks · doi:10.1007/978-3-319-20726-1_4 · Cited by 8

Microstereolithography

You, S., Miller, K. L., & Chen, S. (2019) · Royal Society of Chemistry eBooks · doi:10.1039/9781788012683-00001 · Cited by 9

Fabrication and characterization of embedded horizontal micro‐channels using line‐scan stereolithography

Choi, J.-W., Quintana, R., & Wicker, R. B. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111156478 · Cited by 8

Approximate Optimization Study of Light Curing Waterborne Polyurethane Materials for the Construction of 3D Printed Cytocompatible Cartilage Scaffolds

Chen, Y., Shie, M., Chang, W., & Shen, Y. (2021) · Materials · doi:10.3390/ma14226804 · Cited by 8

Holographic photopolymerization combined to microfluidics for the fabrication of lab-in-lab microdevices and complex 3D micro-objects

Lale, A., Buckley, C., Kermène, V., Desfarges‐Berthelemot, A., Dumas-Bouchiat, F., Mignard, E., & Rossignol, F. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e20054 · Cited by 7

Study of the two-photon excitation of photoinitiator in various solvents, and the two-photon polymerization process

Haq, B. S., Khan, H. U., Alam, K., Attaullah, S., Zari, I., & Mateenullah, M. (2015) · Applied Optics · doi:10.1364/ao.54.007020 · Cited by 7

MATERIALS AND METHODS OF BONE TISSUE ENGINEERING

Tereshchenko, V., Larionov, P., Kirilova, I. A., Sadovoy, M. A., & Mamonova, E. V. (2016) · Russian Journal of Spine Surgery (Khirurgiya Pozvonochnika) · doi:10.14531/ss2016.1.72-81 · Cited by 6

Multifunctional microfluidic devices from tailored photopolymer formulations

Männel, M. J., Weigel, N., & Thiele, J. (2019) · Microfluidics, BioMEMS, and Medical Microsystems · doi:10.1117/12.2514798 · Cited by 6

A review: Ceramic additive manufacturing

Li, H., Peng, C., & Mu, B. (2025) · Advances in Applied Ceramics Structural Functional and Bioceramics · doi:10.1177/17436753251414940 · Cited by 5

Rapid Prototyping for the Engineering of Osteochondral Tissues

Marrella, A., Cavo, M., & Scaglione, S. (2016) · Studies in mechanobiology, tissue engineering and biomaterials · doi:10.1007/978-3-319-44785-8_9 · Cited by 5

A Stereolithography System for 3D Low Cost Components

Suryatal, B. K., Sarawade, S. S., & Deshmukh, S. P. (2020) · Journal Européen des Systèmes Automatisés · doi:10.18280/jesa.530312 · Cited by 5

Additive Manufacturing for Tissue Engineering

Miar, S., Shafiee, A., Guda, T., & Narayan, R. J. (2018) · Springer eBooks · doi:10.1007/978-3-319-40498-1_2-1 · Cited by 5

Projection Microstereolithography as a Micro-Additive Manufacturing Technology: Processes, Materials, and Applications

Choi, J.-W., Lu, Y., & Wicker, R. B. (2015) · CRC Press eBooks · doi:10.1201/b19360-5 · Cited by 4

Additive Manufacturing of Polymers: 3D and 4D Printing, Methodologies, Type of Polymeric Materials, and Applications

González-Henríquez, C. M., Sarabia‐Vallejos, M. A., Sanz-Horta, R., & Rodríguez‐Hernández, J. (2022) · Wiley eBooks · doi:10.1002/9783527815562.mme0040 · Cited by 4

State-of-the-Art Overview and Recent Trends in Biomedical Devices Using Digital Manufacturing: Opportunities, Limitations, and Current Market

Ramachandran, M. K., Raigar, J., Kannan, M., & Velu, R. (2023) · Springer eBooks · doi:10.1007/978-981-99-7100-8_1 · Cited by 3

Potential of unsaturated polyesters in biomedicine and tissue engineering

Spasojevic, P. M., & Spasojević, M. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-99466-8.00005-8 · Cited by 3

Fabrication of 3D scaffolds based on fully biobased unsaturated polyester resins by microstereo-lithography

Gonçalves, F. A. M. M., Fonseca, A. C., Cordeiro, R., Piedade, A. P., Faneca, H., Serra, A., & Coelho, J. F. J. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac4b46 · Cited by 3

Mechanically strong porous bioceramic tubes facilitate large segmental bone defect repair by providing long-term structurally stability and promoting osteogenesis

Xie, L., Zhang, J., Sun, H., Chen, Z., Teng, W., Chai, X., Wang, C., Yang, X., Li, Y., Xu, S., et al. (2023) · Engineered Regeneration · doi:10.1016/j.engreg.2023.10.001 · Cited by 3

In-Process Measurement of Thickness of Cured Resin in Evanescent-Wave-Based Nano-stereolithography Using Critical Angle Reflection

Kong, D., Michihata, M., Takamasu, K., & Takahashi, S. (2018) · Nanomanufacturing and Metrology · doi:10.1007/s41871-018-0013-z · Cited by 3

Exploring the Future of Hydrogels in Rapid Prototyping: A Review on Current Trends and Limitations

Billiet, T., Vandenhaute, M., Schelfhout, J., Vlierberghe, S. V., & Dubruel, P. (2012) · Springer series in biomaterials science and engineering · doi:10.1007/978-1-4614-4328-5_9 · Cited by 3

New Trends in the Design of Biomaterials for 3D and 4D Printing

del Olmo, R., Martínez‐Campos, E., Relinque, J. J., Gallardo, A., Rodríguez‐Hernández, J., Matykina, E., & Santos‐Coquillat, A. (2025) · Advances in material research and technology · doi:10.1007/978-3-031-97481-6_3 · Cited by 2

Microbial Degradation of Nitrate: Put Microbes to Work

Gunasekara, N. D., Idroos, F. S., & Manage, P. M. (2018) · Environment and Natural Resources Journal · doi:10.32526/ennrj.17.2.2019.10 · Cited by 2

Controlling Penetration Depth in Projection Stereolithography by Adjusting the Operation Wavelength

Lehtinen, P., Laurila, S., Kaivola, M., & Partanen, J. P. (2014) · Key engineering materials · doi:10.4028/www.scientific.net/kem.611-612.756 · Cited by 2

Fabrication and analysis of cylindrical resin AFM microcantilevers

Cheneler, D., Bowen, J., Leigh, S. J., Purssell, C. P., Billson, D. R., Hutchins, D. A., & Ward, M. C. L. (2011) · Ultramicroscopy · doi:10.1016/j.ultramic.2011.03.009 · Cited by 2

A Study on Liquid Bridge Based Microstereolithography (LBMSL) System

Lu, Y. (2016) · OhioLink ETD Center (Ohio Library and Information Network) · Cited by 2

Development and Characterizations of Liquid Bridge Based Microstereolithography (LBMSL) System

Lu, Y., Lee, J.-W., Kashyap, S., Emon, O. F., & Choi, J. (2017) · ASME International Manufacturing Science and Engineering Conference (MSEC) · doi:10.1115/msec2017-2731 · Cited by 2

Metallized compliant 3D microstructures for dry contact thermal conductance enhancement

Cui, J., Wang, J., Zhong, Y., Pan, L., & Weibel, J. A. (2018) · Journal of Micromechanics and Microengineering · doi:10.1088/1361-6439/aaaf2e · Cited by 2

Design and fabrication of physiologic tissue scaffolds using projection-micro-stereolithography

Raredon, M. S. B., & Sam, M. (2014) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 2

Complete elimination of the beam hardening effect in quantitative absorption tomography using polychromatic x‐rays with single‐component specimens

Eyou, A., Arhatari, B. D., & Tran, C. Q. (2020) · X-Ray Spectrometry · doi:10.1002/xrs.3170 · Cited by 1

Design and integration of a DMD-based dual-telecentric optical system for sub-micron maskless lithography

Duan, J., Huang, Z., Lin, Z., Lv, J., Qiao, J., & Li, L. (2026) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2026.03.075 · Cited by 1

The integrated design of a MEMS-based flow-sensor system

André, N., Francis, L. A., Raskin, J., Nachergaele, P., Vaassen, J.-M., Civello, J., Cases, S., Paquay, S., & Baetselier, E. D. (2011) · Digital Access to Libraries (Université catholique de Louvain (UCL), l'Université de Namur (UNamur) and the Université Saint-Louis (USL-B)) · Cited by 1

Fabrication of PPF Based Drug Containing Microneedle Arrays by Microstereolithography

Mantha, S. N. (2013) · OhioLink ETD Center (Ohio Library and Information Network) · Cited by 1

Weak two-photon absorption applied to the rapid prototyping of cell scaffolds

Haq, B. S., Khan, H. U., Alam, K., Attaullah, S., & Sultan, M. (2015) · Applied Optics · doi:10.1364/ao.55.000228 · Cited by 1

Near-infrared photopolymerization assisted by upconversion nanophosphors for biomedical applications

Savelyev, A. G., Semchishen, V. A., Нечаев, А. В., Khaydukov, K. V., Анатольевна, Д. П., Generalova, A. N., & Khaydukov, E. V. (2018) · EPJ Web of Conferences · doi:10.1051/epjconf/201819004018 · Cited by 1

Mask projection microstereolithography of novel biocompatible polymers

Lambert, P. M., Chartrain, N. A., Schultz, A., Cooke, S. L., Long, T. E., Whittington, A. R., & Williams, C. B. (2014) · Cited by 1

Analysis of Two-Photon Polymerization for the Development of a Reconfigurable Micro-Device Manufacturing System.

Foo-Gregory, L. H., & Serge, L. (2012) · Deep Blue (University of Michigan) · Cited by 1

Applications of Microstereolithography in Tissue Engineering

Gill, A. A. (2012) · White Rose eTheses Online (University of Leeds, The University of Sheffield, University of York) · Cited by 1

Design and Fabrication of a Mask Projection Microstereolithography System for the Characterization and Processing of Novel Photopolymer Resins

Lambert, P. M. (2014) · VTechWorks (Virginia Tech) · Cited by 1

Investigation into Additive Manufacturing for Controlling Thermal Expansion in Optical Applications

Milward, S. (2020) · doi:10.23889/suthesis.59454 · Cited by 1

Development of three-dimensional patterning strategies for osteochondral tissue engineering

Sawkins, M. J. (2013) · UPT. Syiah Kuala University Library (Syiah Kuala University)

Ultra low power flow-to-frequency SOI MEMS transducer

André, N., Rue, B., Vynckt, D. V., Francis, L. A., Flandre, D., & Raskin, J. ‐. (2010) · Procedia Engineering · doi:10.1016/j.proeng.2010.09.166

Cell-Based Sensors and Cell-Based Actuators

Lantada, A. D. (2016) · Studies in mechanobiology, tissue engineering and biomaterials · doi:10.1007/978-3-319-29328-8_21

Mask Projection Microstereolithography 3D Printing of Gelatin Methacrylate

Surbey, W. R. (2019) · VTechWorks (Virginia Tech)

Nano/Micro Processing

ナノ・マイクロ加工分科会 (2010) · Journal of the Japan Society for Technology of Plasticity · doi:10.9773/sosei.51.798

3D printed microneedle patches for painless drug delivery

Wojtyłko, M., Froelich, A., Jadach, B., Szybowicz, M., Nowicka, A. B., & Osmałek, T. Z. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-23645-7.00008-8

Influence de l'architecture macroporeuse en phosphate de calcium sur le comportement cellulaire in vitro

Chamary, S. (2018) · doi:10.70675/34003d0dzcc1dz4442z8949zc227eb2537a8

Systèmes photoamorceurs et modèle pour la fabrication additive par photopolymérisation

Métral, B. (2020) · doi:10.70675/40b61105z9d69z4204z9d98z4c62b498d95b

Additive manufacturing of sustainable bio-based composites: Challenges and new opportunities

Andrew, J. J., Misra, M., Mohanty, A. K., Hassan, M., Paulin, D. G., Khan, K. A., Umer, R., & Dhakal, H. N. (2026) · Materials Today Advances · doi:10.1016/j.mtadv.2026.100957

Fabrication of Complex 3D Micro-Scale Scaffolds and Drug Delivery Devices using Dynamic Mask Projection Microstereolithography

Choi, J. W., Park, I. B., Wicker, R. B., Lee, S. H., & Kim, H.-C. (2008) · Texas Digital Library (University of Texas) · doi:10.26153/tsw/15075

Scaffold Fabrication with Biodegradable Poly(propylene fumarate) Using Microstereolithography

Lee, J. W., Kim, B. G., Lim, G. B., & Cho, D. (2007) · Key engineering materials · doi:10.4028/www.scientific.net/kem.342-343.141 · Cited by 9

Fabrication and characteristic analysis of a poly(propylene fumarate) scaffold using micro‐stereolithography technology

Lee, J. W., Lan, P. X., Kim, B. G., Lim, G., & Cho, D. (2008) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31057 · Cited by 80

3D scaffold fabrication with PPF/DEF using micro-stereolithography

Lee, J., Lan, P., Kim, B., Lim, G., Cho, D., & 임근배 (2007) · Open Access System for Information Sharing (Pohang University of Science and Technology) · doi:10.1016/j.mee.2007.0

Multi-material microstereolithography

Choi, J.-W., MacDonald, E. W., & Wicker, R. B. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2434-8 · Cited by 149