Fabrication of 3D biocompatible/biodegradable micro-scaffolds using dynamic mask projection microstereolithography

The design of scaffolds for use in tissue engineering. Part I. Traditional factors

Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2001) · Tissue Engineering · doi:10.1089/107632701753337645 · Cited by 2,234

Scaffold design and fabrication technologies for engineering tissues — state of the art and future perspectives

Hutmacher, D. W. (2001) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856201744489 · Cited by 1,423

Role of material surfaces in regulating bone and cartilage cell response

Boyan, B. D., Hummert, T. W., Dean, D. D., & Schwartz, Z. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85758-9 · Cited by 1,331

Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs

Leong, K. F., Cheah, C. M., & Chua, C. K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00030-9 · Cited by 1,090

Projection micro-stereolithography using digital micro-mirror dynamic mask

Sun, C., Fang, N. X., Wu, D. M., & Zhang, X. (2005) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2004.12.011 · Cited by 885

Rapid prototyping & manufacturing— Fundamentals of stereolithography

Jacobs, P. F. (1993) · Journal of Manufacturing Systems · doi:10.1016/0278-6125(93)90311-g · Cited by 853

Use of stereolithography to manufacture critical‐sized 3D biodegradable scaffolds for bone ingrowth

Cooke, M. N., Fisher, J. P., Dean, D., Rimnac, C. M., & Mikos, A. G. (2002) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.10485 · Cited by 571

A Polymer Foam Conduit Seeded with Schwann Cells Promotes Guided Peripheral Nerve Regeneration

Hadlock, T. A., Sundback, C. A., Hunter, D. A., Cheney, M. L., & Vacanti, J. P. (2000) · Tissue Engineering · doi:10.1089/107632700320748 · Cited by 404

Engineering Bone Regeneration with Bioabsorbable Scaffolds with Novel Microarchitecture

Whang, K., Healy, K. E., Elenz, D. R., Nam, E. K., Tsai, D. C., Thomas, C. H., Nuber, G. W., Glorieux, F. H., Travers, R., & Sprague, S. M. (1999) · Tissue Engineering · doi:10.1089/ten.1999.5.35 · Cited by 401

Tissue ingrowth and degradation of two biodegradable porous polymers with different porosities and pore sizes

van Tienen, T. G., Heijkants, R. G. J. C., Buma, P., de Groot, J. H., Pennings, A. J., & Veth, R. P. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00280-0 · Cited by 270

Soft and hard tissue response to photocrosslinked poly(propylene fumarate) scaffolds in a rabbit model

Fisher, J. P., Vehof, J. W. M., Dean, D., van der Waerden, J. P. C. M., Holland, T. A., Mikos, A. G., & Jansen, J. A. (2001) · Journal of Biomedical Materials Research · doi:10.1002/jbm.1268 · Cited by 253

Real three dimensional micro fabrication using stereo lithography and metal molding

Ikuta, K., & Hirowatari, K. (2002) · Proceedings, IEEE micro electro mechanical systems · doi:10.1109/memsys.1993.296949 · Cited by 244

Two-photon-absorbed near-infrared photopolymerization for three-dimensional microfabrication

Maruo, S., & Kawata, S. (1998) · Journal of Microelectromechanical Systems · doi:10.1109/84.735349 · Cited by 217

Photocrosslinking characteristics and mechanical properties of diethyl fumarate/poly(propylene fumarate) biomaterials

Fisher, J. P., Dean, D., & Mikos, A. G. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00178-3 · Cited by 216

Crosslinking characteristics of an injectable poly(propylene fumarate)/?-tricalcium phosphate paste and mechanical properties of the crosslinked composite for use as a biodegradable bone cement

Peter, S. J., Kim, P., Yasko, A. W., Yaszemski, M. J., & Mikos, A. G. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19990305)44:3 · Cited by 205

Microstereophotolithography using a liquid crystal display as dynamic mask-generator

Bertsch, A., Zissi, S., Jézéquel, J. Y., Corbel, S., & André, J. (1997) · Microsystem Technologies · doi:10.1007/s005420050053 · Cited by 188

Synthesis and properties of photocross-linked poly(propylene fumarate) scaffolds

Fisher, J. P., Holland, T. A., Dean, D., Engel, P. S., & Mikos, A. G. (2001) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856201316883476 · Cited by 175

Microstereolithography and other Fabrication Techniques for 3D MEMS

Varadan, V. K., Jiang, X., & Varadan, V. V. (2001) · Medical Entomology and Zoology · Cited by 165

Microfabrication of ceramic components by microstereolithography

Bertsch, A., Jiguet, S., & Renaud, P. (2003) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/14/2/005 · Cited by 161

Cure depth control for complex 3D microstructure fabrication in dynamic mask projection microstereolithography

Choi, J., Wicker, R. B., Cho, S., Ha, C., & Lee, S. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910925072 · Cited by 148

Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry of Synthetic Polymers, 5. Analysis of Poly(propylene oxide)s by Coupled Liquid Chromatography at the Critical Point of Adsorption and MALDI-TOF Mass Spectrometry

Keil, C., Esser, E., & Pasch, H. (2001) · Macromolecular Materials and Engineering · doi:10.1002/1439-2054(20010301)286:3 · Cited by 122

Projection Microfabrication of Three-Dimensional Scaffolds for Tissue Engineering

Han, L., Mapili, G., Chen, S., & Roy, K. (2008) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2823079 · Cited by 110

Kinetics of poly(propylene fumarate) synthesis by step polymerization of diethyl fumarate and propylene glycol using zinc chloride as a catalyst

Shung, A. K., Timmer, M. D., Jo, S., Engel, P. S., & Mikos, A. G. (2002) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856202753525963 · Cited by 91

Process planning method for mask projection micro‐stereolithography

Limaye, A. S., & Rosen, D. W. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710736759 · Cited by 86

Fabrication and characteristic analysis of a poly(propylene fumarate) scaffold using micro‐stereolithography technology

Lee, J. W., Lan, P. X., Kim, B. G., Lim, G., & Cho, D. (2008) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31057 · Cited by 80

Subregional slicing method to increase three-dimensional nanofabrication efficiency in two-photon polymerization

Park, S., Lee, S. H., Yang, D., Kong, H. J., & Lee, K.-S. (2005) · Applied Physics Letters · doi:10.1063/1.2103393 · Cited by 78

3D scaffold fabrication with PPF/DEF using micro-stereolithography

Lee, J., Lan, P. X., Kim, B. G., Lim, G., & Cho, D. (2007) · Microelectronic Engineering · doi:10.1016/j.mee.2007.01.267 · Cited by 77

A novel high-accuracy microstereolithography method employing an adaptive electro-optic mask

Farsari, M., Claret-Tournier, F., Huang, S., Chatwin, C. R., Budgett, D., Birch, P. M., Young, R. C. D., & Richardson, J. D. (2000) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(00)00672-5 · Cited by 72

Ultraprecise microreproduction of a three-dimensional artistic sculpture by multipath scanning method in two-photon photopolymerization

Yang, D., Park, S., Lim, T. W., Kong, H. J., Yi, S. W., Yang, H. K., & Lee, K.-S. (2007) · Applied Physics Letters · doi:10.1063/1.2425022 · Cited by 67

Fabrication and characterization of porous alginate/polyvinyl alcohol hybrid scaffolds for 3D cell culture

Cho, S.-H., Oh, S. H., & Lee, J. H. (2005) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/1568562054414658 · Cited by 66

Mass production of 3-D microstructures using projection microstereolithography

Ha, Y. M., Choi, J. W., & Lee, S. H. (2008) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-007-1031-8 · Cited by 56

Microstereolithography: concepts and applications

Bertsch, A., Bernhard, P., & Renaud, P. (2002) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa.2001.997697 · Cited by 55

Design of microstereolithography system based on dynamic image projection for fabrication of three-dimensional microstructures

Choi, J. W., Ha, Y. M., Lee, S. H., & Choi, K. H. (2006) · Journal of Mechanical Science and Technology · doi:10.1007/bf02916326 · Cited by 48

Synthesis and properties of UV-curable waterborne unsaturated polyester for wood coating

Jung, S.-J., Lee, S., Cho, W., & Ha, C. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19980725)69:4 · Cited by 48

Photoforming applied to fine machining

Takagi, T., & Nakajima, N. (2002) · Proceedings, IEEE micro electro mechanical systems · doi:10.1109/memsys.1993.296927 · Cited by 45

Processability characteristics and physico-mechanical properties of natural rubber modified with cashewnut shell liquid and cashewnut shell liquid–formaldehyde resin

Menon, A. R. R., Aigbodion, A. I., Pillai, C. K. S., Mathew, N. M., & Bhagawan, S. S. (2002) · European Polymer Journal · doi:10.1016/s0014-3057(01)00165-3 · Cited by 33

Properties of UV-curable polyurethane acrylates using nonyellowing polyisocyanate for floor coating

Ha, C., Jung, S.-J., Kim, E.-S., Kim, W.-S., Lee, S., & Cho, W. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19961114)62:7 · Cited by 29

Consideration on the producing of high aspect ratio micro parts using UV sensitive photopolymer

NAKAMOTO, T., Yamaguchi, K., & A., P. A. (2002) · doi:10.1109/mhs.1996.563401 · Cited by 26

Corrected Article: “Ultraprecise microreproduction of a three-dimensional artistic sculpture by multipath scanning method in two-photon photopolymerization” [Appl. Phys. Lett 90, 013113 (2007)]

Yang, D., Park, S., Lim, T. W., Kong, H. J., Yi, S. W., Yang, H. K., & Lee, K.-S. (2007) · Applied Physics Letters · doi:10.1063/1.2692435 · Cited by 17

Fabrication of 3-Dimensional Microstructures Using Dynamic Image Projection

Choi, J. W., Ha, Y. M., Choi, K. H., & Lee, S. H. (2007) · Key engineering materials · doi:10.4028/www.scientific.net/kem.339.473 · Cited by 11

A review on stereolithography and its applications in biomedical engineering

Melchels, F. P. W., Feijén, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,473

3D printing of ceramics: A review

Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. N. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,191

Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences

Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746

Recent advances in 3D printing of biomaterials

Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734

Scaffolds for bone tissue engineering: state of the art and new perspectives

Roseti, L., Parisi, V., Petretta, M., Cavallo, C., Desando, G., Bartolotti, I., & Grigolo, B. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.05.017 · Cited by 1,320

Fabrication of Complex 3D Micro-Scale Scaffolds and Drug Delivery Devices using Dynamic Mask Projection Microstereolithography

Choi, J. W., Park, I. B., Wicker, R. B., Lee, S. H., & Kim, H.-C. (2008) · Texas Digital Library (University of Texas) · doi:10.26153/tsw/15075

Scaffold Fabrication with Biodegradable Poly(propylene fumarate) Using Microstereolithography

Lee, J. W., Kim, B. G., Lim, G. B., & Cho, D. (2007) · Key engineering materials · doi:10.4028/www.scientific.net/kem.342-343.141 · Cited by 9

Fabrication and characteristic analysis of a poly(propylene fumarate) scaffold using micro‐stereolithography technology

Lee, J. W., Lan, P. X., Kim, B. G., Lim, G., & Cho, D. (2008) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31057 · Cited by 80

3D scaffold fabrication with PPF/DEF using micro-stereolithography

Lee, J., Lan, P., Kim, B., Lim, G., Cho, D., & 임근배 (2007) · Open Access System for Information Sharing (Pohang University of Science and Technology) · doi:10.1016/j.mee.2007.0

Multi-material microstereolithography

Choi, J.-W., MacDonald, E. W., & Wicker, R. B. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2434-8 · Cited by 149