The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Influence of selective laser melting process parameters on texture evolution in pure copper
Open accessAbstract
Abstract In the present work, Crack-Free pure copper parts with relative densities exceeding 98% are processed by selective laser melting (SLM) using a high-power fiber laser. The influence of different laser scan parameters such as hatch spacing, laser power and scan speed on the texture evolution in the manufactured parts is determined. On the top surfaces, a clear interrelationship between laser scan parameters and crystallographic texture is established. This shows that the texture at the top surface can be very strong especially when a high laser power and a low scanning speed is used. However, a random texture exists in the core of the sample due to successive re-melting and altered heat gradients induced by the application of a 90° scan rotation between subsequent layers. A maximum electrical conductivity of 88% of the International Annealed Copper Standard (IACS) is achieved in the as-built state. Damage to the optical mirror of the SLM machine is observed and recommendations for sustainable up-scalability are proposed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Texture Analysis with MTEX – Free and Open Source Software Toolbox
Bachmann, F., Hielscher, R., & Schaeben, H. (2010) · Solid State Phenomena · doi:10.4028/www.scientific.net/ssp.160.63 · Cited by 2,741
Theoretical Solid State Physics
(1972) · Elsevier eBooks · doi:10.1016/c2013-0-02456-5 · Cited by 572
Bloembergen, N. (1973) · Applied Optics · doi:10.1364/ao.12.000661 · Cited by 448
Is the energy density a reliable parameter for materials synthesis by selective laser melting?
Prashanth, K. G., Scudino, S., Maity, T., Das, J., & Eckert, J. (2017) · Materials Research Letters · doi:10.1080/21663831.2017.1299808 · Cited by 418
Theoretical Solid State Physics
(1972) · Elsevier eBooks · doi:10.1016/c2013-0-02343-2 · Cited by 388
Montero-Sistiaga, M. L., Pourbabak, S., Van Humbeeck, J., Schryvers, D., & Vanmeensel, K. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107598 · Cited by 235
Self-citationSelective Laser Melting of Pure Copper
Ikeshoji, T.-T., Nakamura, K., Yonehara, M., Imai, K., & Kyogoku, H. (2018) · JOM · doi:10.1007/s11837-017-2695-x · Cited by 199
The Absorption of Laser Light by Rough Metal Surfaces
(2008) · Diva portal (Dalarna University Library) · Cited by 89
Additive manufacturing boosts efficiency of heat transfer components
Neugebauer, R., Müller, B., Gebauer, M., & Töppel, T. (2011) · Assembly Automation · doi:10.1108/01445151111172925 · Cited by 70
Cited by
About metastable cellular structure in additively manufactured austenitic stainless steels
Kong, D., Dong, C., Wei, S., Ni, X., Zhang, L., Li, R., Wang, L., Man, C., & Li, X. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101804 · Cited by 528
Metallurgy, mechanistic models and machine learning in metal printing
DebRoy, T., Mukherjee, T., Wei, H. L., Elmer, J. W., & Milewski, J. O. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00236-1 · Cited by 497
Coated metal powders for laser powder bed fusion (L-PBF) processing: A review
Bidulsky, R., Gobber, F. S., Bidulska, J., Ceroni, M., Kvackaj, T., & Grande, M. A. (2021) · Metals · doi:10.3390/met11111831 · Cited by 68
Metadata
- Authors
- Jadhav, S. D., Dadbakhsh, S., Goossens, L., Kruth, J.-P., Van Humbeeck, J., & Vanmeensel, K.
- Venue
- Journal of Materials Processing Technology
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 270
- Pages
- 47-58
- ISSN
- 0924-0136 (ISSN-L)
- OpenAlex
- W2916932289
- Cited by
- 326
- References
- 9
- FWCI
- 20.93
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of selective laser melting process parameters on texture evolution in pure copper. https://app.cochat.ai/papers/10.1016/j.jmatprotec.2019.02.022
- The paper
- Jadhav, S. D., Dadbakhsh, S., Goossens, L., Kruth, J.-P., Van Humbeeck, J., & Vanmeensel, K. (2019). Influence of selective laser melting process parameters on texture evolution in pure copper. Journal of Materials Processing Technology. https://doi.org/10.1016/j.jmatprotec.2019.02.022
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.