The DOI matches its Crossref record.
Microstructure and mechanical properties of Hastelloy X produced by HP-SLM (high power selective laser melting)
Open accessAbstract
In order to increase the production rate during selective laser melting (SLM), a high power laser with a large beam diameter is used to build fully dense Hastelloy X parts. Compared to SLM with a low power and small diameter beam, the productivity was increased from 6 mm 3 /s to 16 mm 3 /s, i.e. 2.6 times faster. Besides the productivity benefit, the influence of the use of a high power laser on the rapid solidification microstructure and concomitant material properties is highlighted. The current paper compares the microstructure and tensile properties of Hastelloy X built with low and high power lasers. The use of a high power laser results in wider and shallower melt pools inducing an enhanced morphological and crystallographic texture along the building direction (BD). In addition, the increased heat input results in coarser sub-grains or high density dislocation walls for samples processed with a high power laser. Additionally, the influence of hot isostatic pressing (HIP) as a post-processing technique was evaluated. After HIP, the tensile fracture strain increased as compared to the strain in the as-built state and helped in obtaining competitive mechanical properties as compared to conventionally processed Hastelloy X parts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Progress and perspectives in laser additive manufacturing of key aeroengine materials
Tan, C., Weng, F., Sui, S., Chew, Y., & Bi, G. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103804 · Cited by 520
Influence of selective laser melting process parameters on texture evolution in pure copper
Jadhav, S. D., Dadbakhsh, S., Goossens, L., Kruth, J.-P., Van Humbeeck, J., & Vanmeensel, K. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.02.022 · Cited by 326
Self-citationPost-Process Treatments for Additive-Manufactured Metallic Structures: A Comprehensive Review
Ge, J., Pillay, S., & Ning, H. (2023) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-023-08051-9 · Cited by 157
Metadata
- Authors
- Montero-Sistiaga, M. L., Pourbabak, S., Van Humbeeck, J., Schryvers, D., & Vanmeensel, K.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 165
- Pages
- 107598
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2910206578
- Cited by
- 235
- References
- 0
- FWCI
- 14.65
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microstructure and mechanical properties of Hastelloy X produced by HP-SLM (high power selective laser melting). https://app.cochat.ai/papers/10.1016/j.matdes.2019.107598
- The paper
- Montero-Sistiaga, M. L., Pourbabak, S., Van Humbeeck, J., Schryvers, D., & Vanmeensel, K. (2019). Microstructure and mechanical properties of Hastelloy X produced by HP-SLM (high power selective laser melting). Materials & Design. https://doi.org/10.1016/j.matdes.2019.107598
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.