The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Enhanced rheological behaviors of alginate hydrogels with carrageenan for extrusion-based bioprinting
Abstract
Three-dimensional (3D) bioprinting using biocompatible materials is widely used in the field of tissue engineering and regenerative medicine. However, precise printing of 3D structures is challenging due to weak and uncontrollable mechanical properties of various hydrogels, thus limiting their potential in preclinical and clinical applications. In this study, our goal is to demonstrate the feasibility of precise fabrication of alginate/carrageenan composite scaffolds using extrusion-based 3D bioprinting. At first, the proper concentration of crosslinking agents was determined by the assessment of shear modulus of alginate-based hydrogels. Moreover, alginate/carrageenan composite hydrogels were prepared with different concentrations of carrageenan and used to measure their rheological properties. Based on the assessed viscosities and shear moduli of alginate and alginate/carrageenan hydrogels, printing resolutions in different printing parameters were simulated and presented in the printability maps. In addition, alginate and alginate/carrageenan scaffolds were bioprinted with various printing parameters and used to compare their printability with the simulated results. Also, 3D deposition of both alginate and alginate/carrageenan hydrogels were assessed and compared with each other by continuous monitoring of shape fidelity in 3D structures in ten layers and similar printing resolution. Finally, the cell viability of the 3D alginate/carrageenan composite scaffolds, printed using optimized printing parameters, was evaluated using live/dead staining and confocal fluorescence imaging. Thus, the results in the study show the potential uses of carrageenan for a prospective bioink with remarkable mechanical properties suitable for precise fabrication of 3D hydrogel scaffolds using bioprinting techniques.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Independent Control of Rigidity and Toughness of Polymeric Hydrogels
Kong, H. J., Wong, E., & Mooney, D. J. (2003) · Macromolecules · doi:10.1021/ma034137w · Cited by 224
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Translational Applications of Hydrogels
Correa, S., Grosskopf, A. K., Lopez Hernandez, H., Chan, D., Yu, A. C., Stapleton, L. M., & Appel, E. A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01177 · Cited by 1,143
Alginate and alginate composites for biomedical applications
Ahmad Raus, R., Wan Nawawi, W. M. F., & Nasaruddin, R. R. (2021) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2020.10.001 · Cited by 627
Carrageenan: Drug Delivery Systems and Other Biomedical Applications
Pacheco-Quito, E.-M., Ruiz-Caro, R., & Veiga, M.-D. (2020) · Marine Drugs · doi:10.3390/md18110583 · Cited by 420
Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel‐Based Bioinks
Cui, X., Li, J., Hartanto, Y., Durham, M., Tang, J., Zhang, H., Hooper, G., Lim, K., & Woodfield, T. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901648 · Cited by 383
Metadata
- Authors
- Kim, M. H., Lee, Y. W., Jung, W.-K., Oh, J., & Nam, S. Y.
- Venue
- Journal of the Mechanical Behavior of Biomedical Materials
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 98
- Pages
- 187-194
- ISSN
- 1751-6161 (ISSN-L)
- OpenAlex
- W2949270585
- Cited by
- 175
- References
- 4
- FWCI
- 7.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Enhanced rheological behaviors of alginate hydrogels with carrageenan for extrusion-based bioprinting. https://app.cochat.ai/papers/10.1016/j.jmbbm.2019.06.014
- The paper
- Kim, M. H., Lee, Y. W., Jung, W.-K., Oh, J., & Nam, S. Y. (2019). Enhanced rheological behaviors of alginate hydrogels with carrageenan for extrusion-based bioprinting. Journal of the Mechanical Behavior of Biomedical Materials. https://doi.org/10.1016/j.jmbbm.2019.06.014
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.