The DOI matches its Crossref record; 102 of the 102 references it cites were found in a registry or an index.
Recent progress of reinforcement materials: a comprehensive overview of composite materials
Open accessAbstract
Emerged in the middle of 20th century, composite materials are now one of the hotspot research topics in the modern technology. Their promising characteristics make them suitable for enormous applications in industrial field such as aerospace, automotive, construction, sports, bio-medical and many others. These materials reveal remarkable structural and mechanical properties such as high strength to weight ratio, resistance to chemicals, fire, corrosion and wear; being economical to manufacture. Herein, an overview of composite materials, their characterization, classification and main advantages linked to physical and mechanical properties based on the recent studies are presented. There, were presented the conventional manufacturing techniques of composite and their applications. It was highlighted the tremendous need to discovery new generation of composites that should incorporate the synthetic or natural materials by implementing new efficient manufacturing processes. In the combination of matrix and reinforcement materials, the use of natural materials as constituent are compulsory in order to obtain a complete material degradable as environmentally friendly.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
IOP Conference Series: Materials Science and Engineering
(2022) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/1231/1/011001 · Cited by 10,357
An Introduction to Composite Materials
Clyne, T. W., & Hull, D. (2019) · Cambridge University Press eBooks · doi:10.1017/9781139050586 · Cited by 3,018
ASME International Mechanical Engineering Congress and Exposition
(2001) · The Journal of the Acoustical Society of America · doi:10.1121/1.4776777 · Cited by 2,619
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,280
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Introduction to Composite Materials
Tsai, S. W., & Hahn, H. T. (2018) · Routledge eBooks · doi:10.1201/9780203750148 · Cited by 2,024
Chen, Z., Xu, C., Ma, C., Ren, W., & Cheng, H. (2013) · Advanced Materials · doi:10.1002/adma.201204196 · Cited by 1,986
Reference Module in Materials Science and Materials Engineering
Macovez, R., & Rudolf, P. (2016) · Elsevier eBooks · Cited by 1,887
Fundamentals, processes and applications of high-permittivity polymer–matrix composites
Dang, Z.-M., Yuan, J.-K., Zha, J.-W., Zhou, T., Li, S.-T., & Hu, G.-H. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.08.001 · Cited by 1,783
Mechanics of Composite Materials
Jones, R. M. (2018) · CRC Press eBooks · doi:10.1201/9781498711067 · Cited by 1,509
Recent advances in the development of aerospace materials
Zhang, X., Chen, Y., & Hu, J. (2018) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2018.01.001 · Cited by 1,235
Tjong, S. C. (2013) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2013.08.001 · Cited by 1,155
Introduction to Composite Materials Design
Barbero, E. J. (2010) · CRC Press eBooks · doi:10.1201/9781439894132 · Cited by 1,092
Review of advanced composite structures for naval ships and submarines
Mouritz, A. P., Gellert, E., Burchill, P., & Challis, K. (2001) · Composite Structures · doi:10.1016/s0263-8223(00)00175-6 · Cited by 1,085
A short review on basalt fiber reinforced polymer composites
Dhand, V., Mittal, G., Rhee, K. Y., Park, S.-J., & Hui, D. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2014.12.011 · Cited by 1,080
Nanocomposite Materials for Optical Applications
Beecroft, L. L., & Ober, C. K. (1997) · Chemistry of Materials · doi:10.1021/cm960441a · Cited by 1,019
Composite materials science and engineering
Chawla, K. K. (1989) · Composites · doi:10.1016/0010-4361(89)90346-7 · Cited by 983
Principles of Composite Material Mechanics
Gibson, R. F. (2016) · CRC Press eBooks · doi:10.1201/b19626 · Cited by 932
Recycling of composite materials
Yang, Y., Boom, R., Irion, B., van Heerden, D.-J., Kuiper, P., & de Wit, H. (2012) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/j.cep.2011.09.007 · Cited by 853
Qiu, M., Wang, D., Liang, W., Liu, L., Zhang, Y., Chen, X., Sang, D. K., Xing, C., Li, Z., Dong, B., et al. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1714421115 · Cited by 812
Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 770
Machining of Composite Materials
Teti, R. (2002) · CIRP Annals · doi:10.1016/s0007-8506(07)61703-x · Cited by 740
Structural materials challenges for advanced reactor systems
Yvon, P. J., & Carré, F. (2008) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2008.11.026 · Cited by 732
Structural Composite Materials
Campbell, F. C. (2010) · ASM International eBooks · doi:10.31399/asm.tb.scm.9781627083140 · Cited by 682
Metal-matrix composites for space applications
Rawal, S. P. (2001) · JOM · doi:10.1007/s11837-001-0139-z · Cited by 639
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Goh, G. D., Yap, Y. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800271 · Cited by 621
Bonded repair of composite aircraft structures: A review of scientific challenges and opportunities
Katnam, K. B., Da Silva, L. F. M., & Young, T. M. (2013) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2013.03.003 · Cited by 610
Efficient electromagnetic interference shielding of lightweight graphene/polystyrene composite
Yan, D.-X., Ren, P.-G., Pang, H., Fu, Q., Yang, M.-B., & Li, Z.-M. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32692b · Cited by 589
Isolation and characterization of nanocrystalline cellulose from sugar palm fibres (Arenga Pinnata)
Ilyas, R. A., Sapuan, S. M., & Ishak, M. R. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.11.045 · Cited by 568
Mechanics of mechanically fastened joints in polymer–matrix composite structures – A review
Thoppul, S. D., Finegan, J., & Gibson, R. F. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.09.037 · Cited by 556
Lubin, G. (1982) · Springer eBooks · doi:10.1007/978-1-4615-7139-1 · Cited by 522
Introduction to Aerospace Materials
Mouritz, A. (2012) · American Institute of Aeronautics and Astronautics eBooks · doi:10.2514/4.869198 · Cited by 511
Forintos, N., & Czigany, T. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.10.098 · Cited by 487
Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments
Davim, J. P., & Reis, P. (2003) · Composite Structures · doi:10.1016/s0263-8223(02)00257-x · Cited by 471
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.002 · Cited by 448
Modern ceramic engineering: properties, processing and use in design
West, G. (1994) · Composites Manufacturing · doi:10.1016/0956-7143(94)90021-3 · Cited by 444
Interlaminar and intralaminar reinforcement of composite laminates with aligned carbon nanotubes
Wicks, S. S., de Villoria, R. G., & Wardle, B. L. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.09.001 · Cited by 431
Polymer matrix-natural fiber composites: An overview
Yashas Gowda, T. G., Sanjay, M. R., Subrahmanya Bhat, K., Madhu, P., Senthamaraikannan, P., & Yogesha, B. (2018) · Cogent Engineering · doi:10.1080/23311916.2018.1446667 · Cited by 429
The physical properties of composite materials
Hale, D. K. (1976) · Journal of Materials Science · doi:10.1007/bf02403361 · Cited by 419
Goriparthi, B. K., Suman, K. N. S., & Rao, N. M. (2012) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.05.007 · Cited by 400
Glass–basalt/epoxy hybrid composites for marine applications
Fiore, V., Bella, G. D., & Valenza, A. (2010) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2010.11.043 · Cited by 393
Composite materials: science and engineering
(2013) · Choice Reviews Online · doi:10.5860/choice.50-3872 · Cited by 393
Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up
Davim, J. P., Reis, P., & António, C. C. (2004) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00253-7 · Cited by 388
Manufacturing of Polymer Composites
Åström, B. T. (2018) · Routledge eBooks · doi:10.1201/9780203748169 · Cited by 375
Wang, X., Liu, W. S., Lu, X., & Lee, P. S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm35307e · Cited by 366
Rezaei, F., Yunus, R., & Ibrahim, N. A. (2009) · Materials & Design · doi:10.1016/j.matdes.2008.05.005 · Cited by 361
Modern Ceramic Engineering: Properties, Processing, and Use in Design, Fourth Edition
Richerson, D. W. (2018) · Medical Entomology and Zoology · Cited by 353
Wisnom, M. R., Gigliotti, M., Ersoy, N., Campbell, M., & Potter, K. D. (2005) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.05.019 · Cited by 350
Research Progress in MnO2–Carbon Based Supercapacitor Electrode Materials
Zhang, Q., Zhang, D., Miao, Z., Zhang, X., & Chou, S. (2018) · Small · doi:10.1002/smll.201702883 · Cited by 345
Ren, X., Zhou, J., Qi, X., Liu, Y., Huang, Z., Li, Z., Ge, Y., Dhanabalan, S. C., Ponraj, J. S., Wang, S., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700396 · Cited by 344
Recent advances in black phosphorus-based photonics, electronics, sensors and energy devices
Zhou, Y., Zhang, M., Guo, Z., Miao, L., Han, S.-T., Wang, Z., Zhang, X., Zhang, H., & Peng, Z. (2017) · Materials Horizons · doi:10.1039/c7mh00543a · Cited by 332
Flammability and fire resistance of composites reinforced by natural fibers
Kozłowski, R., & Władyka‐Przybylak, M. (2008) · Polymers for Advanced Technologies · doi:10.1002/pat.1135 · Cited by 323
Ceramics and ceramic matrix composites for heat exchangers in advanced thermal systems—A review
Sommers, A. D., Wang, Q., Han, X., T’Joen, C., Park, Y., & Jacobi, A. M. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.02.018 · Cited by 309
Transparent and antimicrobial cellulose film from ginger nanofiber
Abral, H., Ariksa, J., Mahardika, M., Handayani, D., Aminah, I., Sandrawati, N., Pratama, A. B., Fajri, N., Sapuan, S. M., & Ilyas, R. A. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2019.105266 · Cited by 290
Natural fiber-reinforced polymer composites
Taj, S. A., Khan, S., & Munawar, M. A. (2007) · Proceedings of the Pakistan Academy of Sciences · Cited by 287
Manufacturing and applications of structural sandwich components
Karlsson, K. F., & TomasÅström, B. (1997) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(96)00098-x · Cited by 280
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.124 · Cited by 257
Wan, P., Wen, X., Sun, C., Chandran, B. K., Zhang, H., Sun, X., & Chen, X. (2015) · Small · doi:10.1002/smll.201501772 · Cited by 256
Graphene–Bi2Te3 Heterostructure as Saturable Absorber for Short Pulse Generation
Mu, H., Wang, Z., Yuan, J., Xiao, S., Chen, C., Chen, Y., Chen, Y., Song, J., Wang, Y., Xue, Y., et al. (2015) · ACS Photonics · doi:10.1021/acsphotonics.5b00193 · Cited by 253
Ilyas, R. A., Sapuan, S. M., Sanyang, M. L., Ishak, M. R., & Zainudin, E. S. (2018) · Current Analytical Chemistry · doi:10.2174/1573411013666171003155624 · Cited by 253
The use of a collagen sponge/living cell composite material to treat donor sites in burn patients
Still, J., Glat, P., Silverstein, P., Griswold, J., & Mozingo, D. (2003) · Burns · doi:10.1016/s0305-4179(03)00164-5 · Cited by 251
Composite materials parts manufacturing
Fleischer, J., Teti, R., Lanza, G., Mativenga, P., Möhring, H.-C., & Caggiano, A. (2018) · CIRP Annals · doi:10.1016/j.cirp.2018.05.005 · Cited by 248
A review on polymer heat exchangers for HVAC&R applications
T'Joen, C., Park, Y., Wang, Q., Sommers, A., Han, X., & Jacobi, A. (2009) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2008.11.008 · Cited by 246
Resin transfer molding of natural fiber reinforced composites: cure simulation
Rouison, D., Sain, M. M., & Couturier, M. F. (2003) · Composites Science and Technology · doi:10.1016/j.compscitech.2003.06.001 · Cited by 244
High Quality Flax Fibre Composites Manufactured by the Resin Transfer Moulding Process
Oksman, K. (2001) · Journal of Reinforced Plastics and Composites · doi:10.1177/073168401772678634 · Cited by 241
Ilyas, R. A., Sapuan, S. M., Ibrahim, R., Abral, H., Ishak, M. R., Zainudin, E. S., Asrofi, M., Atikah, M. S. N., Huzaifah, M. R. M., Radzi, A. M., et al. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.04.011 · Cited by 240
Abral, H., Basri, A., Muhammad, F., Fernando, Y., Hafizulhaq, F., Mahardika, M., Sugiarti, E., Sapuan, S. M., Ilyas, R. A., & Stephane, I. (2019) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2019.02.012 · Cited by 239
Xing, C., Jing, G., Liang, X., Qiu, M., Li, Z., Cao, R., Li, X., Fan, D., & Zhang, H. (2017) · Nanoscale · doi:10.1039/c7nr00663b · Cited by 234
Salavagione, H. J., Díez-Pascual, A. M., Lázaro, E., Vera, S., & Gómez-Fatou, M. A. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02159b · Cited by 225
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2017) · BioResources · doi:10.15376/biores.12.4.8734-8754 · Cited by 218
Jiang, Y., Miao, L., Jiang, G., Chen, Y., Qi, X., Jiang, X.-F., Zhang, H., & Wen, S. (2015) · Scientific Reports · doi:10.1038/srep16372 · Cited by 212
Application of chopped basalt fibers in reinforced mortar: A review
Ralegaonkar, R., Gavali, H., Aswath, P., & Abolmaali, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.245 · Cited by 206
Photoelectrochemical-type sunlight photodetector based on MoS 2 /graphene heterostructure
Huang, Z., Han, W., Tang, H., Ren, L., Chander, D. S., Qi, X., & Zhang, H. (2015) · 2D Materials · doi:10.1088/2053-1583/2/3/035011 · Cited by 186
Applied Plastics Engineering Handbook
(2011) · Elsevier eBooks · doi:10.1016/c2010-0-67336-6 · Cited by 185
Anbukarasi, K., & Kalaiselvam, S. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.10.078 · Cited by 184
Sugar Palm Starch-Based Composites for Packaging Applications
Sanyang, M. L., Ilyas, R. A., Sapuan, S. M., & Jumaidin, R. (2017) · Springer eBooks · doi:10.1007/978-3-319-67319-6_7 · Cited by 167
Fundamentals of Fibre Reinforced Composite Materials
Bunsell, A. R., & Renard, J. (2005) · CRC Press eBooks · doi:10.1201/9781420056969 · Cited by 167
Thermal and mechanical properties of glass reinforced soy-based polyurethane composites
HUSIC, S. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.05.020 · Cited by 165
Friction Stir Processing of Particle Reinforced Composite Materials
Gan, Y. X., Solomon, D. M., & Reinbolt, M. (2010) · Materials · doi:10.3390/ma3010329 · Cited by 153
Misdan, N., Ismail, A. F., & Hilal, N. (2015) · Desalination · doi:10.1016/j.desal.2015.06.001 · Cited by 151
Song, W., Liu, J., You, L., Wang, S., Zhou, Q., Gao, Y., Yin, R., Xu, W., & Guo, Z. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.02.065 · Cited by 144
Scalable Preparation of Multifunctional Fire-Retardant Ultralight Graphene Foams
Hu, C., Xue, J., Dong, L., Jiang, Y., Wang, X., Qu, L., & Dai, L. (2016) · ACS Nano · doi:10.1021/acsnano.5b06710 · Cited by 143
Fundamentals of Fibre Reinforced Composite Materials
Bunsell, A. R., & Renard, J. (2005) · Materials Today · doi:10.1016/s1369-7021(05)71085-3 · Cited by 139
Li, R., Gu, Y., Zhang, G., Yang, Z., Li, M., & Zhang, Z. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.03.002 · Cited by 135
Biopolymers for Biocomposites and Chemical Sensor Applications
Abhilash, M., & Thomas, D. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-809261-3.00015-2 · Cited by 131
Sarı, A., Biçer, A., Karaipekli, A., & Al‐Sulaiman, F. A. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.09.049 · Cited by 120
Ehrlich, H., Janussen, D., Simon, P., Bazhenov, V. V., Шапкин, Н. П., Erler, C., Mertig, M., Born, R., Heinemann, S., Hanke, T., et al. (2008) · Journal of Nanomaterials · doi:10.1155/2008/670235 · Cited by 117
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/368/1/012006 · Cited by 113
Kamel, N. A., Abd‐El‐Messieh, S. L., & Saleh, N. M. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.11.104 · Cited by 102
Alarifi, I. M. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.08.019 · Cited by 102
Ioniţă, M., Crică, L. E., Voicu, Ș. I., Dinescu, S., Miculescu, F., Costache, M., & Iovu, H. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.10.095 · Cited by 77
Nanocomposites for improved orthopedic and bone tissue engineering applications
Hasnain, M. S., & Nayak, A. K. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-813740-6.00008-9 · Cited by 76
Understanding the wear and tribological properties of ceramic matrix composites
Zhang, C. (2014) · Elsevier eBooks · doi:10.1533/9780857098825.2.312 · Cited by 38
Manufacturing of Nanocomposites with Engineering Plastics
(2015) · Elsevier eBooks · doi:10.1016/c2014-0-02699-8 · Cited by 34
Acoustic and mechanical properties of luffa fiber-reinforced biocomposites
Körük, H., & Genç, G. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-102292-4.00017-5 · Cited by 34
Design and fabrication methods for biocomposites
Cardon, L., Ragaert, K., Santis, R. D., & Gloria, A. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100752-5.00002-0 · Cited by 33
Sharma, S., & Batra, S. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816909-4.00005-1 · Cited by 29
Natural fiber-reinforced polymer composites
Verma, D., & Goh, K. L. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-102426-3.00003-5 · Cited by 26
Reaction Injection Molding and Fast Polymerization Reactions
Kresta, J. E., & Atlanta, G. I. S. O. R. I. M. 1. (1982) · Springer eBooks · doi:10.1007/978-1-4684-8733-6 · Cited by 22
Graphene-Based Composite Materials for Chemical Sensor Application
Kim, I.-D., Choi, S.-J., & Cho, H.-J. (2015) · Nanoscience and technology · doi:10.1007/978-3-319-14406-1_3 · Cited by 19
Cavaleri, L., Paola, M. D., Ferrotto, M. F., Scalici, T., & Valenza, A. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.02.004 · Cited by 17
Carbon nanocomposites for implant dentistry and bone tissue engineering
Madanagopal, T. T., Agarwalla, S. V., & Rosa, V. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-813742-0.00003-1 · Cited by 10
Cited by
Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications
Rajak, D., Pagar, D., Menezes, P., & Linul, E. (2019) · Polymers · doi:10.3390/polym11101667 · Cited by 1,706
Self-citationAndrew, J. J., & Dhakal, H. N. (2022) · Composites Part C: Open Access · doi:10.1016/j.jcomc.2021.100220 · Cited by 491
Grain refinement of magnesium alloys by dynamic recrystallization (DRX): A review
Mirzadeh, H. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.07.150 · Cited by 354
Advances of composite materials in automobile applications – A review
Khan, F., Hossain, N., Mim, J. J., Rahman, S. M., Iqbal, M. J., Billah, M., & Chowdhury, M. A. (2025) · Journal of Engineering Research · doi:10.1016/j.jer.2024.02.017 · Cited by 306
Sharma, A., Mukhopadhyay, T., Rangappa, S. M., Siengchin, S., & Kushvaha, V. (2022) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-021-09700-9 · Cited by 285
Metadata
- Authors
- Rajak, D. K., Pagar, D. D., Kumar, R., & Pruncu, C. I.
- Venue
- Journal of Materials Research and Technology
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 8
- Issue
- 6
- Pages
- 6354-6374
- ISSN
- 2214-0697 (ISSN-L)
- 2238-7854
- OpenAlex
- W2979367241
- Cited by
- 883
- References
- 102
- FWCI
- 28.37
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.