The DOI matches its Crossref record; 90 of the 90 references it cites were found in a registry or an index.
A review on natural fibers for development of eco-friendly bio-composite: characteristics, and utilizations
Open accessAbstract
Understanding the basic properties of natural fibers is important to determine the optimal intended uses for instance as high-quality bio-composite raw material. This review describes the characteristics, and potential uses of some natural fibers in order to improve their sustainability and economic values. The natural fibers have low density and high strength to weight ratio and reduction make them potential as light weight composite and reinforcement materials. The microstructure and chemical compositions of fibers affect the mechanical properties with the fiber cross-sectional area is the most variable influencing the fiber strength. Natural fibers are easy to absorb water due to the presence of hemicellulose that give hydrophilic properties make them less compatible in the interaction with matrix with hydrophobicity properties. Higher cellulose content and crystallinity tend to result better strength properties of fiber while lignin is since versa. Besides that, fiber anatomical characteristics vary between different and same species that affect on the density and mechanical properties. The other factors namely environmental conditions, method of transportation, storage time and conditions, and fiber extraction affect the size and quality of the natural fibers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479
Wood: Chemistry, ultrastructure, reactions
(1983) · doi:10.1515/9783110839654 · Cited by 2,846
Nimz, H. H. (1984) · Holz als Roh- und Werkstoff · doi:10.1007/bf02608943 · Cited by 2,761
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
Natural fiber polymer composites: A review
Saheb, D. N., & Jog, J. P. (1999) · Advances in Polymer Technology · doi:10.1002/(sici)1098-2329(199924)18:4<351::aid-adv6>3.0.co;2-x · Cited by 2,429
Are natural fiber composites environmentally superior to glass fiber reinforced composites?
Joshi, S. V., Drzal, L. T., Mohanty, A. K., & Arora, S. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.016 · Cited by 2,335
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,280
Lavoine, N., Desloges, I., Dufresne, A., & Bras, J. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.05.026 · Cited by 1,791
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015) · International Journal of Polymer Science · doi:10.1155/2015/243947 · Cited by 1,657
Characterization and properties of natural fiber polymer composites: A comprehensive review
Sanjay, M. R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S., & Pradeep, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.101 · Cited by 1,652
Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review
Jawaid, M., & Abdul Khalil, H. P. S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.04.043 · Cited by 1,567
Natural-fiber-reinforced polymer composites in automotive applications
Holbery, J., & Houston, D. (2006) · JOM · doi:10.1007/s11837-006-0234-2 · Cited by 1,565
A review on the degradability of polymeric composites based on natural fibres
Azwa, Z. N., Yousif, B. F., Manalo, A. C., & Karunasena, W. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.11.025 · Cited by 1,530
Critical review of recent publications on use of natural composites in infrastructure
Dittenber, D. B., & GangaRao, H. V. S. (2012) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.11.019 · Cited by 1,515
Surface modifications of natural fibers and performance of the resulting biocomposites: An overview
Mohanty, A. K., Misra, M., & Drzal, L. T. (2001) · Composite Interfaces · doi:10.1163/156855401753255422 · Cited by 1,072
Thyavihalli Girijappa, Y. G., Mavinkere Rangappa, S., Parameswaranpillai, J., & Siengchin, S. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00226 · Cited by 1,011
Processing and characterization of natural cellulose fibers/thermoset polymer composites
Thakur, V. K., & Thakur, M. K. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.03.039 · Cited by 990
Vinod, A., Sanjay, M. R., Suchart, S., & Jyotishkumar, P. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120978 · Cited by 828
Plant resources of southeast Asia
Siemonsma, J. S., & Soetjipto, N. (1989) · Cited by 818
Recent Development in Natural Fiber Reinforced Polypropylene Composites
Malkapuram, R., Kumar, V., & Negi, Y. S. (2009) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684407087759 · Cited by 813
A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers
Ramamoorthy, S. K., Skrifvars, M., & Persson, A. (2015) · Polymer Reviews · doi:10.1080/15583724.2014.971124 · Cited by 801
Review of the recent developments in cellulose nanocomposite processing
Oksman, K., Aitomäki, Y., Mathew, A. P., Siqueira, G., Zhou, Q., Butylina, S., Tanpichai, S., Zhou, X., & Hooshmand, S. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.10.041 · Cited by 712
Yan, L., Kasal, B., & Huang, L. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.02.002 · Cited by 635
A Review on Pineapple Leaves Fibre and Its Composites
Asim, M., Abdan, K., Jawaid, M., Nasir, M., Dashtizadeh, Z., Ishak, M. R., & Hoque, M. E. (2015) · International Journal of Polymer Science · doi:10.1155/2015/950567 · Cited by 634
Paper and Composites from Agro-Based Resources
Rowell, R. M., Young, R. A., & Rowell, J. K. (1996) · Medical Entomology and Zoology · Cited by 571
Mechanical and water absorption behaviour of banana/sisal reinforced hybrid composites
Venkateshwaran, N., Elayaperumal, A., Alavudeen, A., & Thiruchitrambalam, M. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.03.002 · Cited by 543
Characterization of raw and alkali treated new natural cellulosic fiber from Coccinia grandis.L
Senthamaraikannan, P., & Kathiresan, M. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.01.072 · Cited by 540
Joseph, P. V., Rabello, M. S., Mattoso, L. H. C., Joseph, K., & Thomas, S. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00080-5 · Cited by 515
Mechanical properties of polypropylene composites: A review
Shubhra, Q. T., Alam, A., & Quaiyyum, M. (2013) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705711428659 · Cited by 508
Mechanical properties of natural fibre reinforced polyester composites: Jowar, sisal and bamboo
Ratna Prasad, A. V., & Mohana Rao, K. (2011) · Materials & Design · doi:10.1016/j.matdes.2011.03.015 · Cited by 425
Yan, L., Chouw, N., Huang, L., & Kasal, B. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.182 · Cited by 402
Chemical Composition of Natural Fibers and its Influence on their Mechanical Properties
Komuraiah, A., Kumar, N. S., & Prasad, B. D. (2014) · Mechanics of Composite Materials · doi:10.1007/s11029-014-9422-2 · Cited by 399
Effect of fiber treatment on flexural properties of natural fiber reinforced composites: A review
Sood, M., & Dwivedi, G. (2018) · Egyptian Journal of Petroleum · doi:10.1016/j.ejpe.2017.11.005 · Cited by 384
(2010) · Journal of Scientific & Industrial Research · Cited by 379
Mechanical properties of woven banana fibre reinforced epoxy composites
Sapuan, S. M., Leenie, A., Harimi, M., & Beng, Y. K. (2006) · Materials & Design · doi:10.1016/j.matdes.2004.12.016 · Cited by 377
Sreenivasan, V. S., Somasundaram, S., Ravindran, D., Manikandan, V., & Narayanasamy, R. (2011) · Materials & Design · doi:10.1016/j.matdes.2010.06.004 · Cited by 372
Flexural properties of treated and untreated kenaf/epoxy composites
Yousif, B. F., Shalwan, A., Chin, C. W., & Ming, K. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.04.017 · Cited by 364
Brazilian waste fibres as reinforcement for cement-based composites
Savastano, H., Warden, P. G., & Coutts, R. S. P. (2000) · Cement and Concrete Composites · doi:10.1016/s0958-9465(00)00034-2 · Cited by 346
Environmental friendly method for the extraction of coir fibre and isolation of nanofibre
Abraham, E., Deepa, B., Pothen, L. A., Cintil, J., Thomas, S., John, M. J., Anandjiwala, R., & Narine, S. S. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.10.056 · Cited by 328
Lignin Functionalization for the Production of Novel Materials
Bertella, S., & Luterbacher, J. S. (2020) · Trends in Chemistry · doi:10.1016/j.trechm.2020.03.001 · Cited by 326
Thermal and Mechanical Properties of Bamboo Fiber Reinforced Epoxy Composites
Zhang, K., Wang, F., Liang, W., Wang, Z., Duan, Z., & Yang, B. (2018) · Polymers · doi:10.3390/polym10060608 · Cited by 325
Madhu, P., Rangappa, S. M., Jawaid, M., Siengchin, S., Khan, A., & Pruncu, C. I. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106437 · Cited by 317
Mwaikambo, L. Y., & Ansell, M. P. (1999) · Die Angewandte Makromolekulare Chemie · doi:10.1002/(sici)1522-9505(19991201)272:1<108::aid-apmc108>3.0.co;2-9 · Cited by 313
Ramesh, M., Deepa, C., Kumar, L. R., Sanjay, M., & Siengchin, S. (2022) · Journal of Industrial Textiles · doi:10.1177/1528083720924730 · Cited by 299
Effects of fibre treatment on mechanical properties of kenaf fibre reinforced composites: a review
Hamidon, M. H., Sultan, M. T. H., Ariffin, A. H., & Shah, A. U. M. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.04.012 · Cited by 285
Munawar, S. S., Umemura, K., & Kawai, S. (2007) · Journal of Wood Science · doi:10.1007/s10086-006-0836-x · Cited by 283
Self-citationAdvanced High Strength Natural Fibre Composites in Construction
(2016) · Elsevier eBooks · doi:10.1016/c2014-0-03942-1 · Cited by 278
Silva, G., Kim, S., Aguilar, R., & Nakamatsu, J. (2019) · Sustainable materials and technologies · doi:10.1016/j.susmat.2019.e00132 · Cited by 270
Chemical composition and pulping of banana pseudo-stems
Cordeiro, N., Belgacem, M. N., Torres, I. C., & Moura, J. C. V. P. (2004) · Industrial Crops and Products · doi:10.1016/j.indcrop.2003.09.001 · Cited by 269
Hoareau, W., Trindade, W. G., Siegmund, B., Castellan, A., & Frollini, E. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.07.005 · Cited by 250
Narayanasamy, P., Balasundar, P., Senthil, S., Rangappa, S. M., Siengchin, S., Khan, A., & Asiri, A. M. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.02.134 · Cited by 236
Franck, R. R. (2005) · doi:10.1533/9781845690618 · Cited by 220
Abdul Khalil, H. P. S., Siti Alwani, M., Ridzuan, R., Kamarudin, H., & Khairul, A. (2008) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602550701866840 · Cited by 215
Natural Fiber Composites: A Review
Westman, M. P., Fifield, L. S., Simmons, K. L., Laddha, S., & Kafentzis, T. A. (2010) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/989448 · Cited by 185
Wan, J., Wang, Y., & Xiao, Q. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.01.026 · Cited by 175
A Review on Natural Fiber-Reinforced Geopolymer and Cement-Based Composites
Camargo, M., Adefrs Taye, E., Roether, J., Tilahun Redda, D., & Boccaccini, A. (2020) · Materials · doi:10.3390/ma13204603 · Cited by 163
Bello, K., Sarojini, B. K., Narayana, B., Rao, A., & Byrappa, K. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.11.106 · Cited by 162
NATURAL FIBER REINFORCED POLYMER COMPOSITES FOR AUTOMOBILE ACCESSORIES
Chandramohan (2013) · American Journal of Environmental Sciences · doi:10.3844/ajessp.2013.494.504 · Cited by 160
Amir, N., Abidin, K. A. Z., & Shiri, F. B. M. (2017) · Procedia Engineering · doi:10.1016/j.proeng.2017.04.140 · Cited by 159
Banana Pseudo-Stem Fiber: Preparation, Characteristics, and Applications
Subagyo, A., & Chafidz, A. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.82204 · Cited by 157
Binderless fiberboard from steam exploded banana bunch
Quintana, G. C., Velásquez, J. A., Betancourt, S., & Gañán, P. F. (2008) · Industrial Crops and Products · doi:10.1016/j.indcrop.2008.04.007 · Cited by 150
Angelini, L. G., Lazzeri, A., Levita, G., Fontanelli, D., & Bozzi, C. (2000) · Industrial Crops and Products · doi:10.1016/s0926-6690(99)00059-x · Cited by 150
de Farias, J. G. G., Cavalcante, R. C., Canabarro, B. R., Viana, H. M., Scholz, S., & Simão, R. A. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.02.042 · Cited by 150
Analysis of the chemical composition and morphological structure of banana pseudo-stem
Li, K., Fu, S., Zhan, H., Yao, Z., & Lucia, L. A. (2010) · BioResources · doi:10.15376/biores.5.2.576-585 · Cited by 136
Madhu, P., Rangappa, S. M., Senthamaraikannan, P., Pradeep, S., Siengchin, S., Jawaid, M., & Kathiresan, M. (2018) · Journal of Natural Fibers · doi:10.1080/15440478.2018.1534191 · Cited by 136
Sumrith, N., Techawinyutham, L., Rangappa, S. M., Dangtungee, R., & Siengchin, S. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01810-y · Cited by 135
Puttegowda, M., Rangappa, S. M., Pradeep, S., Bhat, K. S., Yogesha, B., & Siengchin, S. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.03.006 · Cited by 132
Physicochemical and Thermal Properties of Ceiba pentandra Bark Fiber
Kumar, R. S., Hynes, N. R. J., Senthamaraikannan, P., Saravanakumar, S. S., & Rangappa, S. M. (2017) · Journal of Natural Fibers · doi:10.1080/15440478.2017.1369208 · Cited by 122
Flour rice husk as filler in block copolymer polypropylene: Effect of different coupling agents
Martí, F., Vilaplana, F., Ribes-Greus, A., Benedito, A., & Sanz‐Box, C. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.22717 · Cited by 120
Introduction to Wood and Natural Fiber Composites
Stokke, D. D., Wu, Q., & Han, G. (2013) · Cited by 117
Hattalli, S., Benaboura, A., Ham-Pichavant, F., Nourmamode, A., & Castellan, A. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00022-8 · Cited by 111
Vijay, R., Vinod, A., Singaravelu, D. L., Rangappa, S. M., & Siengchin, S. (2020) · International Journal of Lightweight Materials and Manufacture · doi:10.1016/j.ijlmm.2020.06.008 · Cited by 111
Effect of graphene liquid crystal on dielectric properties of polydimethylsiloxane nanocomposites
Zhang, Z., Zhang, J., Li, S., Liu, J., Dong, M., Li, Y., Lü, N., Lei, S., Tang, J., Fan, J., et al. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107338 · Cited by 90
Natural Fibers for Sustainable Bio-Composites
Ngo, T.-D. (2018) · InTech eBooks · doi:10.5772/intechopen.71012 · Cited by 86
Development of bamboo fiber-based composites
Wang, G., & Chen, F. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100411-1.00010-8 · Cited by 76
Lignin as an Active Biomaterial: A Review
Solihat, N. N., Sari, F. P., Falah, F., Ismayati, M., Lubis, M. A. R., Fatrıasarı, W., Santoso, E. B., & Syafii, W. (2021) · Jurnal Sylva Lestari · doi:10.23960/jsl191-22 · Cited by 76
Dhaliwal, J. S. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.86884 · Cited by 63
Setty, V. K. S. N., Goud, G., Chikkegowda, S. P., Rangappa, S. M., & Siengchin, S. (2020) · Journal of Natural Fibers · doi:10.1080/15440478.2020.1853925 · Cited by 61
Gupta, U. S., Dhamarikar, M., Dharkar, A., Tiwari, S., & Namdeo, R. (2020) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-020-00179-9 · Cited by 59
Sharba, M. J., Leman, Z., Sultan, M. T. H., Ishak, M. R., & Hanim, M. A. A. (2015) · BioResources · doi:10.15376/biores.11.1.1448-1465 · Cited by 53
Applications of Bio-Composites in Industrial Products
Kandachar, P., & Brouwer, R. (2001) · MRS Proceedings · doi:10.1557/proc-702-u4.1.1 · Cited by 52
Sari, N. H., Fajrin, J., Suteja, S., & Fudholi, A. (2020) · Composites Communications · doi:10.1016/j.coco.2020.01.009 · Cited by 47
Self-citationNatural Fiber Reinforced Composites in the Context of Biodegradability: A Review
Santhosh Kumar, S., & Hiremath, S. S. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.11418-3 · Cited by 47
A Unified Nomenclature for Plant Fibres for Industrial Use
Vincent, J. F. V. (2000) · Applied Composite Materials · doi:10.1023/a:1026516105382 · Cited by 45
Binoj, J. S., Raj, R. E., Hassan, S. A., Mariatti, M., Siengchin, S., & Rangappa, S. M. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-04620-8 · Cited by 45
The use of biomass to produce bio-based composites and building materials
Rowell, R. M. (2014) · Elsevier eBooks · doi:10.1533/9780857097385.2.803 · Cited by 37
The characteristic changes of betung bamboo (Dendrocalamus asper) pretreated by fungal pretreatment
Fatrıasarı, W., Syafii, W., Wistara, N. J., Syamsu, K., & Prasetya, B. (2014) · International Journal of Renewable Energy Development · doi:10.14710/ijred.3.2.133-143 · Cited by 37
Recycling of banana pseudostem waste for economical production of quality banana
Phirke, N. V., Patil, R. P., Chincholkar, S. B., & Kothari, R. M. (2001) · Resources Conservation and Recycling · doi:10.1016/s0921-3449(00)00092-6 · Cited by 25
Yamanaka, A., Yoshikawa, M., Abe, S., Tsutsumi, M., Oohazama, T., Kitagawa, T., Fujishiro, H., Ema, K., Izumi, Y., & Nishijima, S. (2005) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.20563 · Cited by 11
Cited by
Ilyas, R., Zuhri, M., Aisyah, H., Asyraf, M., Hassan, S., Zainudin, E., Sapuan, S., Sharma, S., Bangar, S., Jumaidin, R., et al. (2022) · Polymers · doi:10.3390/polym14010202 · Cited by 369
Khalid, M. Y., Al Rashid, A., Arif, Z. U., Ahmed, W., & Arshad, H. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.128 · Cited by 260
Ilyas, R., Aisyah, H., Nordin, A., Ngadi, N., Zuhri, M., Asyraf, M., Sapuan, S., Zainudin, E., Sharma, S., Abral, H., et al. (2022) · Polymers · doi:10.3390/polym14050874 · Cited by 258
Metadata
- Authors
- Karimah, A., Ridho, M. R., Munawar, S. S., Adi, D. S., Ismadi, Damayanti, R., Subiyanto, B., Fatriasari, W., & Fudholi, A.
- Venue
- Journal of Materials Research and Technology
- Publisher
- Elsevier BV
- Published
- 2021-07
- Volume
- 13
- Pages
- 2442-2458
- ISSN
- 2214-0697 (ISSN-L)
- 2238-7854
- OpenAlex
- W3167090457
- Cited by
- 771
- References
- 90
- FWCI
- 39.22
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.