The DOI matches its Crossref record; 119 of the 119 references it cites were found in a registry or an index.
Research status of laser additive manufacturing for metal: a review
Open accessAbstract
Additive manufacturing (AM) especially laser additive manufacturing (LAM), a novel manufacturing technique of layer-by-layer forming according to geometric model, provides a decent option for materials processing. It owns advantages of rapid prototyping, customization, high material utilization, and the ability to form complicated structures. This paper reviews popular LAM techniques of selective laser sintering/melting, laser metal deposition and laser direct writing. The development status of metallic materials including pure metal, steel, superalloy, titanium and aluminum alloy is presented. The challenges and application limitations of LAM are involved and the development trend in the future is forecasted. In summary, this paper gives an overview of metal LAM expecting to made helpful suggestions on future research and development.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Machine learning for molecular and materials science
Butler, K. T., Davies, D. W., Cartwright, H., Isayev, O., & Walsh, A. (2018) · Nature · doi:10.1038/s41586-018-0337-2 · Cited by 4,968
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Additively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
Self-citationReview of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Wire + Arc Additive Manufacturing
Williams, S., Martina, F., Addison, A. C., Ding, J., Pardal, G., & Colegrove, P. A. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000073 · Cited by 1,971
Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.07.022 · Cited by 1,896
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Development of new metallic alloys for biomedical applications
Niinomi, M., Nakai, M., & Hieda, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.06.037 · Cited by 1,623
Chacón, J. M., Caminero, M. A., García-Plaza, E., & Núñez, P. J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.065 · Cited by 1,603
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Additive manufacturing methods and modelling approaches: a critical review
Bikas, H., Stavropoulos, P., & Chryssolouris, G. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7576-2 · Cited by 1,427
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
Reducing porosity in AlSi10Mg parts processed by selective laser melting
Aboulkhair, N. T., Everitt, N. M., Ashcroft, I., & Tuck, C. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.001 · Cited by 1,281
King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
Levy, G. N., Schindel, R., & Kruth, J. P. (2003) · CIRP Annals · doi:10.1016/s0007-8506(07)60206-6 · Cited by 1,121
Gu, D., Hagedorn, Y.-C., Meiners, W., Meng, G., Batista, R. J. S., Wissenbach, K., & Poprawe, R. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.04.006 · Cited by 1,089
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Mower, T. M., & Long, M. J. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.10.068 · Cited by 1,001
3D Printing of Scaffolds for Tissue Regeneration Applications
Do, A., Khorsand, B., Geary, S. M., & Salem, A. K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500168 · Cited by 949
Material issues in additive manufacturing: A review
Singh, S., Ramakrishna, S., & Singh, R. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2016.11.006 · Cited by 899
High-Entropy Alloys as a Platform for Catalysis: Progress, Challenges, and Opportunities
Xin, Y., Li, S., Qian, Y., Zhu, W., Yuan, H., Jiang, P., Guo, R., & Wang, L. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c03617 · Cited by 840
Lasers and materials in selective laser sintering
Kruth, J. P., Wang, X., Laoui, T., & Froyen, L. (2003) · Assembly Automation · doi:10.1108/01445150310698652 · Cited by 826
Buchanan, C., & Gardner, L. (2019) · Engineering Structures · doi:10.1016/j.engstruct.2018.11.045 · Cited by 826
Gokuldoss, P. K., Kolla, S., & Eckert, J. (2017) · Materials · doi:10.3390/ma10060672 · Cited by 804
Architected Cellular Materials
Schaedler, T. A., & Carter, W. B. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031624 · Cited by 786
Carter, L. N., Martin, C., Withers, P. J., & Attallah, M. M. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.06.172 · Cited by 751
Rapid Prototyping, Principles and Applications
(2010) · Assembly Automation · doi:10.1108/aa.2010.03330dae.001 · Cited by 692
Zhu, Z. G., Nguyen, Q. B., Ng, F. L., An, X. H., Liao, X. Z., Liaw, P. K., Nai, S. M. L., & Wei, J. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.05.015 · Cited by 653
Xing, J.-F., Zheng, M.-L., & Duan, X.-M. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00278h · Cited by 628
Comprehensive Materials Processing
(2014) · Elsevier eBooks · doi:10.1016/c2009-1-63473-0 · Cited by 611
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
Zhang, L., Klemm, D., Eckert, J., Hao, Y., & Sercombe, T. B. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.03.024 · Cited by 597
Residual Stress within Metallic Model Made by Selective Laser Melting Process
Shiomi, M., Osakada, K., Nakamura, K., Yamashita, T., & Abe, F. (2004) · CIRP Annals · doi:10.1016/s0007-8506(07)60677-5 · Cited by 591
Li, R., Niu, P., Yuan, T., Cao, P., Chen, C., & Zhou, K. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.02.298 · Cited by 572
Self-citationFunctional inks and printing of two-dimensional materials
Hu, G., Kang, J., Ng, L. W. T., Zhu, X., Howe, R. C. T., Jones, C. G., Hersam, M. C., & Hasan, T. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00084k · Cited by 569
Microstructural and texture development in direct laser fabricated IN718
Parimi, L. L., Ravi, G. A., Clark, D., & Attallah, M. M. (2014) · Materials Characterization · doi:10.1016/j.matchar.2013.12.012 · Cited by 565
Novel Materials for 3D Printing by Photopolymerization
Layani, M., Wang, X., & Magdassi, S. (2018) · Advanced Materials · doi:10.1002/adma.201706344 · Cited by 561
Promising properties and future trend of eutectic high entropy alloys
Lu, Y., Dong, Y., Jiang, H., Wang, Z., Cao, Z., Guo, S., Wang, T., Li, T., & Liaw, P. K. (2020) · Scripta Materialia · doi:10.1016/j.scriptamat.2020.06.022 · Cited by 559
Self-citationPrecipitation in the equiatomic high-entropy alloy CrMnFeCoNi
Pickering, E. J., Muñoz-Moreno, R., Stone, H. J., & Jones, N. G. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.10.025 · Cited by 555
Vaezi, M., Chianrabutra, S., Mellor, B., & Yang, S. (2013) · Virtual and Physical Prototyping · doi:10.1080/17452759.2013.778175 · Cited by 548
Introduction to Aerospace Materials
Mouritz, A. (2012) · American Institute of Aeronautics and Astronautics eBooks · doi:10.2514/4.869198 · Cited by 511
Trevisan, F., Calignano, F., Lorusso, M., Pakkanen, J., Aversa, A., Ambrosio, E., Lombardi, M., Fino, P., & Manfredi, D. (2017) · Materials · doi:10.3390/ma10010076 · Cited by 502
Parra-Cabrera, C., Achille, C., Kuhn, S., & Ameloot, R. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00631d · Cited by 493
Additive manufacturing technologies: state of the art and trends
Gardan, J. (2016) · International Journal of Production Research · doi:10.1080/00207543.2015.1115909 · Cited by 489
Recent Advances on High‐Entropy Alloys for 3D Printing
Han, C., Fang, Q., Shi, Y., Tor, S. B., Chua, C. K., & Zhou, K. (2020) · Advanced Materials · doi:10.1002/adma.201903855 · Cited by 486
Progress in 3D Printing of Carbon Materials for Energy‐Related Applications
Fu, K., Yao, Y., Dai, J., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201603486 · Cited by 475
Closed loop direct metal deposition: art to part
Mazumder, J., Dutta, D., Kikuchi, N., & Ghosh, A. (2000) · Optics and Lasers in Engineering · doi:10.1016/s0143-8166(00)00072-5 · Cited by 452
Toughening of photo-curable polymer networks: a review
Ligon-Auer, S. C., Schwentenwein, M., Gorsche, C., Stampfl, J., & Liska, R. (2016) · Polymer Chemistry · doi:10.1039/c5py01631b · Cited by 447
Low stiffness porous Ti structures for load-bearing implants
Krishna, B. V., Bose, S., & Bandyopadhyay, A. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.03.008 · Cited by 441
Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
Murr, L. E., Martinez, E., Hernandez, J., Collins, S., Amato, K. N., Gaytan, S. M., & Shindo, P. W. (2012) · Journal of Materials Research and Technology · doi:10.1016/s2238-7854(12)70029-7 · Cited by 425
Bone-like crack resistance in hierarchical metastable nanolaminate steels
Koyama, M., Zhang, Z., Wang, M., Ponge, D., Raabe, D., Tsuzaki, K., Noguchi, H., & Tasan, C. C. (2017) · Science · doi:10.1126/science.aal2766 · Cited by 413
Additive Manufacturing of Metal Structures at the Micrometer Scale
Hirt, L., Reiser, A., Spolenak, R., & Zambelli, T. (2017) · Advanced Materials · doi:10.1002/adma.201604211 · Cited by 400
Reprocessable thermosets for sustainable three-dimensional printing
Zhang, B., Kowsari, K., Serjouei, A., Dunn, M. L., & Ge, Q. (2018) · Nature Communications · doi:10.1038/s41467-018-04292-8 · Cited by 398
Fabrication of functionally graded TiC/Ti composites by Laser Engineered Net Shaping
Liu, W., & DuPont, J. N. (2003) · Scripta Materialia · doi:10.1016/s1359-6462(03)00020-4 · Cited by 379
Microscale residual stresses in additively manufactured stainless steel
Chen, W., Voisin, T., Zhang, Y., Forien, J., Spadaccini, C. M., McDowell, D. L., Zhu, T., & Wang, Y. (2019) · Nature Communications · doi:10.1038/s41467-019-12265-8 · Cited by 352
High temperature wear performance of laser-cladded FeNiCoAlCu high-entropy alloy coating
Jin, G. D., Cai, Z., Guan, Y., Cui, X., Liu, Z., Li, Y., Dong, M., & Zhang, D. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.03.135 · Cited by 346
3D printing for chemical, pharmaceutical and biological applications
Capel, A. J., Rimington, R. P., Lewis, M. P., & Christie, S. D. R. (2018) · Nature Reviews Chemistry · doi:10.1038/s41570-018-0058-y · Cited by 312
Functional properties and promising applications of high entropy alloys
Yan, X., & Zhang, Y. (2020) · Scripta Materialia · doi:10.1016/j.scriptamat.2020.06.017 · Cited by 312
A pragmatic model for selective laser melting with evaporation
Verhaeghe, F., Craeghs, T., Heulens, J., & Pandelaers, L. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.08.027 · Cited by 308
Direct materials deposition: designed macro and microstructure
Mazumder, J., Schifferer, A., & Choi, J. (1999) · Materials Research Innovations · doi:10.1007/s100190050137 · Cited by 302
Fabrication of Ti-6Al-4V Scaffolds by Direct Metal Deposition
Dinda, G. P., Song, L., & Mazumder, J. (2008) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-008-9634-y · Cited by 288
Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting
Yasa, E., Kruth, J.-P., & Deckers, J. (2011) · CIRP Annals · doi:10.1016/j.cirp.2011.03.063 · Cited by 265
Dawes, J., Bowerman, R., & Trepleton, R. (2015) · Johnson Matthey Technology Review · doi:10.1595/205651315x688686 · Cited by 248
Zheng, B., Zhou, Y., Smugeresky, J. E., Schoenung, J. M., & Lavernia, E. J. (2008) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-008-9566-6 · Cited by 214
Experimental studies on selective laser melting of metallic parts
Meier, H., & Haberland, C. (2008) · Materialwissenschaft und Werkstofftechnik · doi:10.1002/mawe.200800327 · Cited by 213
A review of powdered additive manufacturing techniques for Ti-6al-4v biomedical applications
Harun, W. S. W., Manam, N. S., Kamariah, M. S. I. N., Sharif, S., Zulkifly, A. H., Ahmad, I., & Miura, H. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.03.010 · Cited by 211
Kunce, I., Polański, M., Karczewski, K., Płociński, T., & Kurzydłowski, K. J. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.05.144 · Cited by 206
Viewpoint: metallurgical aspects of powder bed metal additive manufacturing
Hebert, R. J. (2016) · Journal of Materials Science · doi:10.1007/s10853-015-9479-x · Cited by 197
Laser-Induced Materials and Processes for Rapid Prototyping
Lü, L., Fuh, J. Y. H., & Wong, Y. S. (2001) · Springer eBooks · doi:10.1007/978-1-4615-1469-5 · Cited by 188
High entropy alloys: Key issues under passionate debate
Biswas, K., Yeh, J.-W., Bhattacharjee, P. P., & DeHosson, J. T. M. (2020) · Scripta Materialia · doi:10.1016/j.scriptamat.2020.07.010 · Cited by 181
Dobbelstein, H., Gurevich, E. L., George, E. P., Ostendorf, A., & Laplanche, G. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2018.10.042 · Cited by 179
Laser engineered net shaping (LENS™): A tool for direct fabrication of metal parts
Atwood, C. L., Griffith, M. L., Harwell, L. D., Schlienger, E., Ensz, M. T., Smugeresky, J. E., Romero, T., Greene, D., & Reckaway, D. E. (1998) · International Congress on Applications of Lasers & Electro-Optics (ICALEO) · doi:10.2351/1.5059147 · Cited by 173
Huang, S., Sing, S. L., de Looze, G., Wilson, R., & Yeong, W. Y. (2020) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2020.103775 · Cited by 166
A Review of the Selective Laser Melting Lattice Structures and Their Numerical Models
Alomar, Z., & Concli, F. (2020) · Advanced Engineering Materials · doi:10.1002/adem.202000611 · Cited by 160
Wen, P., Jauer, L., Voshage, M., Chen, Y., Poprawe, R., & Schleifenbaum, J. H. (2018) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.03.007 · Cited by 152
Current status and challenges of Additive manufacturing in orthopaedics: An overview
Javaid, M., & Haleem, A. (2018) · Journal of Clinical Orthopaedics and Trauma · doi:10.1016/j.jcot.2018.05.008 · Cited by 151
Selective Laser Sintering/Melting
Kumar, S. (2014) · Elsevier eBooks · doi:10.1016/b978-0-08-096532-1.01003-7 · Cited by 135
Ni, C., Shi, Y., Liu, J., & Huang, G. (2018) · Optics & Laser Technology · doi:10.1016/j.optlastec.2018.01.058 · Cited by 133
Shaped metal deposition technique in additive manufacturing: A review
Yılmaz, O., & Ugla, A. A. (2016) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/0954405416640181 · Cited by 128
Pure copper components fabricated by cold spray (CS) and selective laser melting (SLM) technology
Huang, J., Yan, X., Chang, C., Xie, Y., Ma, W., Huang, R., Zhao, R., Li, S., Liu, M., & Liao, H. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.125936 · Cited by 126
Producing metal parts with selective laser sintering/hot isostatic pressing
Das, S., Wohlert, M., Beaman, J. J., & Bourell, D. L. (1998) · JOM · doi:10.1007/s11837-998-0299-1 · Cited by 120
High temperature tribology and wear of selective laser melted (SLM) 316L stainless steel
Alvi, S. A., Saeidi, K., & Akhtar, F. (2020) · Wear · doi:10.1016/j.wear.2020.203228 · Cited by 118
Selective laser melting of aluminum alloys
Aboulkhair, N. T., Everitt, N. M., Maskery, I., Ashcroft, I., & Tuck, C. J. (2017) · MRS Bulletin · doi:10.1557/mrs.2017.63 · Cited by 116
Tong, J., Bowen, C., Persson, J., & Plummer, A. R. (2016) · Materials Science and Technology · doi:10.1080/02670836.2016.1172787 · Cited by 115
Kelly, C. N., Evans, N. T., Irvin, C. W., Chapman, S. C., Gall, K., & Safranski, D. L. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.01.024 · Cited by 109
Kong, D., Ni, X., Dong, C., Zhang, L., Yao, J., Man, C., Wang, L., Xiao, K., & Li, X. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.06.132 · Cited by 108
Na, T.-W., Kim, W. R., Yang, S.-M., Kwon, O., Park, J. M., Kim, G.-H., Jung, K.-H., Lee, C., Park, H.-K., & Kim, H. G. (2018) · Materials Characterization · doi:10.1016/j.matchar.2018.03.003 · Cited by 103
Laser-assisted directed energy deposition of nickel super alloys: A review
Jinoop, A., Paul, C. P., & Bindra, K. S. (2019) · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · doi:10.1177/1464420719852658 · Cited by 101
Introduction to aerospace materials
(2012) · Elsevier eBooks · doi:10.1533/9780857095152.1 · Cited by 97
A review of laser fabrication of metallic engineering components and of materials
Wu, X. (2007) · Materials Science and Technology · doi:10.1179/174328407x179593 · Cited by 95
Microstructural control during direct laser deposition of a β-titanium alloy
Qiu, C., Ravi, G. A., & Attallah, M. M. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2015.05.031 · Cited by 92
Lopez‐Galilea, I., Ruttert, B., He, J., Hammerschmidt, T., Drautz, R., Gault, B., & Theisen, W. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100874 · Cited by 86
Mechanical properties of 304 austenite stainless steel manufactured by laser metal deposition
Huang, W., Zhang, Y., Dai, W., & Long, R. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.04.108 · Cited by 81
A comprehensive study on fused filament fabrication of Ti-6Al-4V structures
Zhang, Y., Bai, S., Riede, M., Garratt, E., & Roch, A. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101256 · Cited by 81
Direct metal writing: Controlling the rheology through microstructure
Chen, W., Thornley, L., Coe, H. G., Tonneslan, S. J., Vericella, J. J., Zhu, C. Y., Duoss, E. B., Hunt, R., Wight, M. J., Apelian, D., et al. (2017) · Applied Physics Letters · doi:10.1063/1.4977555 · Cited by 79
Salvati, E., Lunt, A. J. G., Heason, C. P., Baxter, G. J., & Korsunsky, A. M. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108605 · Cited by 79
Alamos, F. J., Schiltz, J., Kozlovsky, K., Attardo, R., Tomonto, C., Pelletiers, T., & Schmid, S. R. (2020) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2020.105273 · Cited by 78
Microstructure of TA2/TA15 graded structural material by laser additive manufacturing process
Ting-ting, Q. I. A. N., Liu, D., Tian, X., Chang-meng, L. I. U., & Wang, H. (2014) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(14)63404-x · Cited by 74
Liu, L., Zhang, J., & Ai, C. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.12093-4 · Cited by 71
Experimental and Numerical Study of the LENS Rapid Fabrication Process
Wang, L., Felicelli, S. D., & Craig, J. E. (2009) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.3173952 · Cited by 69
Mechanics and energy analysis on molten pool spreading during laser solid forming
Yu, J., Lin, X., Wang, J., Chen, J., & Huang, W. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.02.060 · Cited by 56
Kini, A., Maischner, D., Weisheit, A., Ponge, D., Gault, B., Jägle, E. A., & Raabe, D. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.07.035 · Cited by 55
Hanemann, T., Carter, L. N., Habschied, M., Adkins, N. J. E., Attallah, M. M., & Heilmaier, M. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.04.260 · Cited by 47
Gu, D., Shen, Y., & Lu, Z. (2008) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2008.08.036 · Cited by 46
Selective Laser Melting of Prealloyed High Alloy Steel Powder Beds
Wright, C. S., Youseffi, M., Akhtar, S. P., Childs, T. H. C., Hauser, C., & Fox, P. (2006) · Materials science forum · doi:10.4028/www.scientific.net/msf.514-516.516 · Cited by 39
Ahn, Y.-K., Kim, H. G., Park, H.-K., Kim, G.-H., Jung, K.-H., Lee, C., Kim, W., Lim, S.-H., & Lee, B.-S. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.10.064 · Cited by 38
Montúfar, E. B., Tkachenko, S., Casas-Luna, M., Škarvada, P., Slámečka, K., la Torre, S. D. D., Koutný, D., Paloušek, D., Koledova, Z. S., Hernández-Tapia, L. G., et al. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101516 · Cited by 38
Chen, Y., Wen, P., Voshage, M., Jauer, L., Qin, Y., Schleifenbaum, J. H., & Poprawe, R. (2019) · Journal of Laser Applications · doi:10.2351/1.5096118 · Cited by 37
Microstructure and Property Optimization of LENS Deposited H13 Tool Steel
Brooks, J. A., Robino, C. V., Headley, T. J., Goods, S. H., & Griffith, M. L. (1999) · doi:10.26153/tsw/830 · Cited by 35
Dental root implants produced by the combined selective laser sintering/melting of titanium powders
Толочко, Н. К., Savich, V. V., Laoui, T., et al. (2002) · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · doi:10.1177/146442070221600406 · Cited by 31
Near Net Shape production of metal components using LENS
Schlienger, E., Dimos, D. B., Griffith, M. L., Michael, J., Oliver, M. S., Romero, T., & Smugeresky, J. E. (1998) · University of North Texas Digital Library (University of North Texas) · Cited by 29
Cited by
Additive Manufacturing: A Comprehensive Review
Zhou, L., Miller, J., Vezza, J., Mayster, M., Raffay, M., Justice, Q., Al Tamimi, Z., Hansotte, G., Sunkara, L. D., & Bernat, J. (2024) · Sensors · doi:10.3390/s24092668 · Cited by 599
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
Metadata
- Authors
- Gong, G., Ye, J., Chi, Y., Zhao, Z., Wang, Z., Xia, G., Du, X., Tian, H., Yu, H., & Chen, C.
- Venue
- Journal of Materials Research and Technology
- Publisher
- Elsevier BV
- Published
- 2021-11
- Volume
- 15
- Pages
- 855-884
- ISSN
- 2214-0697 (ISSN-L)
- 2238-7854
- OpenAlex
- W3195442997
- Cited by
- 318
- References
- 119
- FWCI
- 19.96
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.